87023Velocity Posted May 18, 2019 Share Posted May 18, 2019 This may seem an odd question, but are the Farish 20 & 40ft containers which were sold in packs too long? I am currently converting a Farish Intermodal into a Freightliner FSA, the deck length should be 18.38m (60ft) but when placing a Farish 20ft and 40ft container on the extended frame, they overhang by 3mm. I have the deck length at 120mm. The 40ft is 83mm and the 20ft is 41mm, am I miscalculating? Cheers Simon Link to post Share on other sites More sharing options...
RMweb Premium PaulCheffus Posted May 18, 2019 RMweb Premium Share Posted May 18, 2019 (edited) Hi N is 1/148 scale so 20*12 = 240 * 25.4 = 6096 / 148 = 41.18mm so 41 is pretty close. Similarly 40*12 = 480 * 25.4 = 12192 / 148 = 82.3mm Your wagon should have a deck length of 124mm. Does that explain it? Cheers Paul Edited May 18, 2019 by PaulCheffus 1 Link to post Share on other sites More sharing options...
87023Velocity Posted May 18, 2019 Author Share Posted May 18, 2019 Yes it does, cheers, looks like the deck may need lengthening again! I just worked out 2mm/ft and used a convertor for 18.38m to ft then converted to 2mm/ft if that makes sense (forgot I need to remember 1/148)! Fortunately its just the first wagon which playing around with. Cheers Simon Link to post Share on other sites More sharing options...
Fat Controller Posted May 19, 2019 Share Posted May 19, 2019 The Farish intermodals are based on the wagons built for the Channel Tunnel services, TOPS coded FIA and IFA. As such, they were designed to carry Swap-Bodies (either 1 x 13.6m or two of up to 7.4m), rather than ISO boxes. They can, of course, carry ISO boxes, but it's perhaps not the best use of them. The maximum they can accept is a 20' and a 30', though a single 40' or 45' box, or a pair of 20' is more usual. The FSA and FTA are designed purely and simply for ISO boxes, with fixed-position Twistlocks: those on the FIA/IFA can be moved to different positions dependent on the type of 'box' being carried. The Freightliner and Railfreight Distribution wagons were delivered at the same time, from the same factory, so a degree of family resemblance is inevitable. The Freightliner ones have longer decks, however, whilst the raised section of floor for the drawgear is shorter. 1 Link to post Share on other sites More sharing options...
87023Velocity Posted May 19, 2019 Author Share Posted May 19, 2019 1 hour ago, Fat Controller said: The Farish intermodals are based on the wagons built for the Channel Tunnel services, TOPS coded FIA and IFA. As such, they were designed to carry Swap-Bodies (either 1 x 13.6m or two of up to 7.4m), rather than ISO boxes. They can, of course, carry ISO boxes, but it's perhaps not the best use of them. The maximum they can accept is a 20' and a 30', though a single 40' or 45' box, or a pair of 20' is more usual. The FSA and FTA are designed purely and simply for ISO boxes, with fixed-position Twistlocks: those on the FIA/IFA can be moved to different positions dependent on the type of 'box' being carried. The Freightliner and Railfreight Distribution wagons were delivered at the same time, from the same factory, so a degree of family resemblance is inevitable. The Freightliner ones have longer decks, however, whilst the raised section of floor for the drawgear is shorter. Thanks for the info, just in process of converting a Intermodal into a FSA outer but did not stretch it enough to 60ft, got my measurements wrong (beer may have had some involvement). Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now