Popular Post Locksley Posted June 20, 2019 Popular Post Share Posted June 20, 2019 My dad and I treated ourselves to a Photon last week and I've being drawing some stuff up in Tinkercad. Had some excellent prints so far, the Photon is just so easy to use and the quality is phenominal for something you can keep in your back bedroom. To think I can create a 3D model of something on my lunch break and then by that night I could have it physically in my hands is mental. I've posted some of this on my Boxfile topic but it was getting a bit too 3D print oriented so I thought I'd stick a new thread up here. I have started an Etsy store which for now only has a set of OO traffic cones listed but more will be added very soon. Link is in my sig, and any purchases will be very much appreciated to help fund my habit One of my main R&D projects with the Photon so far has been a little 48DS. This is intended to be nothing more than a siding filler/wagon load so I'm not planning on motorising it, nor is it particularly accurate but it looks enough like a 48 for me. This one is currently sat on a pair of Gibson 10.5mm disks. I've also been working on a few other things, mainly an OHV modelled off the Parkside kit which with a little tweaking has come out beautifully, in fact the solebars look better than the injection moulded versions. I'm in the process of modifying the 3D model to represent both a damaged/dented version, as well as a few of the slight variations in solebar, axlebox, door latches etc that can seen on photos. Plus I've built up a small pack of enhancement parts for the boxfile which I'm hoping to offer for sale at some point in the future too. The Mini Moke was just a quick test to see how a vehicle would print. Not too bad as it turns out. 17 2 1 Link to post Share on other sites More sharing options...
CarriageShed Posted June 20, 2019 Share Posted June 20, 2019 I can see I'm going to have to keep my eye on you, just in case you start offering items in N gauge/2mm scale 2 Link to post Share on other sites More sharing options...
Locksley Posted June 20, 2019 Author Share Posted June 20, 2019 8 minutes ago, CarriageShed said: I can see I'm going to have to keep my eye on you, just in case you start offering items in N gauge/2mm scale I am planning on scaling both up and down from OO so watch this space! I need to do some tests with different scaling options 2 Link to post Share on other sites More sharing options...
CarriageShed Posted June 20, 2019 Share Posted June 20, 2019 I love the promise being offered by 3D printing. I've long been after different loco bodies for existing N gauge chassis, but right now I'm into the last stages of painting and detailing a 3D printed ex-LSWR royal saloon in N, and I have to say it's looking pretty marvellous. It'll certainly never be available through any manufacturer as it was withdrawn in the early 1930s, so 3D was the only way to go. Before you know it there will be quite a crowd in this thread offering you hints and tips. I'm following around half a dozen similar threads right now, and everyone seems keen on making it work. 1 Link to post Share on other sites More sharing options...
benblack5 Posted June 20, 2019 Share Posted June 20, 2019 The OHV looks absolutely cracking, very interested to see how the dented version comes out! The door springs and brake handle look beautifully thin, what sort of thickness have you go those down to? (I'm considering purchasing a photon myself, your work is definitely encouraging me!) 1 Link to post Share on other sites More sharing options...
Locksley Posted June 20, 2019 Author Share Posted June 20, 2019 5 minutes ago, CarriageShed said: I love the promise being offered by 3D printing. I've long been after different loco bodies for existing N gauge chassis, but right now I'm into the last stages of painting and detailing a 3D printed ex-LSWR royal saloon in N, and I have to say it's looking pretty marvellous. It'll certainly never be available through any manufacturer as it was withdrawn in the early 1930s, so 3D was the only way to go. Before you know it there will be quite a crowd in this thread offering you hints and tips. I'm following around half a dozen similar threads right now, and everyone seems keen on making it work. It's all very exciting, and can only get better/cheaper too. And I'm quite open to ideas for future prints! 1 minute ago, benblack5 said: The OHV looks absolutely cracking, very interested to see how the dented version comes out! The door springs and brake handle look beautifully thin, what sort of thickness have you go those down to? (I'm considering purchasing a photon myself, your work is definitely encouraging me!) Cheers! I can't remember exactly but it's something daft like 0.3mm. The solebars printed absolutely beautifully, I'm so happy with how they've turned out. The quality of prints with the Photon is crazy, you won't be dissappointed if you do decide to go ahead! 2 1 Link to post Share on other sites More sharing options...
CarriageShed Posted June 20, 2019 Share Posted June 20, 2019 17 minutes ago, Locksley said: It's all very exciting, and can only get better/cheaper too. And I'm quite open to ideas for future prints! I certainly won't hold you to it, especially while you're still at the learning stage, but I'd love to see a superheated Drummond L12 loco body to fit a Union Mills T9 chassis in N. One for the future perhaps. I could also guarantee many Southern fans who'd be happy to see one of several carriage diagrams that almost certainly won't be available any other way. 1 Link to post Share on other sites More sharing options...
Locksley Posted June 20, 2019 Author Share Posted June 20, 2019 11 minutes ago, CarriageShed said: I certainly won't hold you to it, especially while you're still at the learning stage, but I'd love to see a superheated Drummond L12 loco body to fit a Union Mills T9 chassis in N. One for the future perhaps. I could also guarantee many Southern fans who'd be happy to see one of several carriage diagrams that almost certainly won't be available any other way. I will add it to the list, I'm all for odd or unusual things that would never otherwise be modelled. I'd certainly love to get to a point where I'm able to model up something like that. Link to post Share on other sites More sharing options...
CarriageShed Posted June 20, 2019 Share Posted June 20, 2019 1 hour ago, Locksley said: I will add it to the list, I'm all for odd or unusual things that would never otherwise be modelled. I'd certainly love to get to a point where I'm able to model up something like that. I think a large number of modellers will be happy to see you reach a point at which you're able to model something like that! But starting with wagons and coaches wouldn't be a bad thing either. There are many gaps in the market there, and probably some good, fairly basic detail to get your teeth into. 1 Link to post Share on other sites More sharing options...
Locksley Posted June 21, 2019 Author Share Posted June 21, 2019 Third print of the OHV came out lovely. I tried to get a dented look to the sides on the 3D model but I'm not entirely sure it's worked, I probably won't bother again. Made a start painting it up just to see how it would look. I have a set of Internal User decals on the way from Railtec so I'll pop those one before further weathering. 5 Link to post Share on other sites More sharing options...
CarriageShed Posted June 21, 2019 Share Posted June 21, 2019 5 hours ago, Locksley said: I tried to get a dented look to the sides on the 3D model but I'm not entirely sure it's worked... It looks pretty dented from here! Link to post Share on other sites More sharing options...
Locksley Posted June 21, 2019 Author Share Posted June 21, 2019 23 minutes ago, CarriageShed said: It looks pretty dented from here! Haha, I mean it has 'worked', but I don't think the effect really works. 1 Link to post Share on other sites More sharing options...
David Bigcheeseplant Posted June 21, 2019 Share Posted June 21, 2019 I have just got my printer delivered so looking forward to getting going. David Link to post Share on other sites More sharing options...
Locksley Posted June 21, 2019 Author Share Posted June 21, 2019 (edited) On 21/06/2019 at 13:44, David Bigcheeseplant said: I have just got my printer delivered so looking forward to getting going. David Awesome, you'll have a lot of fun. I'd highly recommend the following, if you're not already aware of some of these things: 1) Use ChiTuBox instead of the Anycubic slicing software. The included software is just an inferior, cut down version of ChiTuBox. 2) Throw away the included USB stick and get a decent SanDisk one or similar. I got a 4gb one off Amazon for less than a fiver. 3) Use the support settings here, I've not yet had a failed print from support failure with these settings. They may even be a bit overkill. 4) Set your base layers to 8 at 80sec exposure, again I've never had a print fail to adhere to the build plate with these settings. 5) I'd highly recommend trying Elegoo Grey resin as I've found it to be far better than the included Anycubic Green stuff, 0.04mm 10.7sec exposure works brilliantly for me. Edited June 24, 2019 by Locksley it was Friday afternoon... 1 2 Link to post Share on other sites More sharing options...
73c Posted June 21, 2019 Share Posted June 21, 2019 Any thought's on doing the Maunsell 350hp shunter body in oo 1 Link to post Share on other sites More sharing options...
CarriageShed Posted June 21, 2019 Share Posted June 21, 2019 1 hour ago, 73c said: Any thoughts on doing the Maunsell 350hp shunter body in OO? Here comes your list 2 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted June 21, 2019 RMweb Gold Share Posted June 21, 2019 2 hours ago, CarriageShed said: Here comes your list One of your first items will need to be a froth bucket! Mike. 1 Link to post Share on other sites More sharing options...
David Bigcheeseplant Posted June 21, 2019 Share Posted June 21, 2019 I installed the software on my PC and it was fine although it has suddenly reverted to Chinese any ideas how I restore it to English? Link to post Share on other sites More sharing options...
monkeysarefun Posted June 21, 2019 Share Posted June 21, 2019 3 hours ago, David Bigcheeseplant said: I installed the software on my PC and it was fine although it has suddenly reverted to Chinese any ideas how I restore it to English? Third menu item across the top should be Language Setting. This should have only one option which toggles between Chinese and English. Need to restart after it. But definitly try Chitubox, it has useful additions such as hollowing model and estimation of resin used. Link to post Share on other sites More sharing options...
Locksley Posted June 24, 2019 Author Share Posted June 24, 2019 +1 for Chitubox, I didn't even bother trying the software that came with the printer tbh. On 21/06/2019 at 15:57, 73c said: Any thought's on doing the Maunsell 350hp shunter body in oo I have added it to my list, I'll let you know if/when I get around to it. 1 Link to post Share on other sites More sharing options...
Locksley Posted June 24, 2019 Author Share Posted June 24, 2019 (edited) Painted up one of my OHV prints, very happy with the outcome! Decals are from Railtec, with chalk markings applied using a Prismacolor White pencil. Weathering was mostly with oils. The damage effect looks better once painted but I still think I need to try something different next time. I also printed out a couple more, as well as an ex Soda Ash version with a slightly different door, and a couple of load inserts. Edited June 24, 2019 by Locksley 12 Link to post Share on other sites More sharing options...
lyneux Posted June 24, 2019 Share Posted June 24, 2019 On 21/06/2019 at 14:43, Locksley said: Awesome, you'll have a lot fun. 3) Use the support settings here, I've not yet had a failed print from support failure with these settings. They may even be a bit overkill. Is this the correct link? Seems to just link to the Chitubox home page...? Thanks and keep posting. Lovely inspiring stuff! Guy 1 Link to post Share on other sites More sharing options...
Locksley Posted June 24, 2019 Author Share Posted June 24, 2019 2 hours ago, lyneux said: Is this the correct link? Seems to just link to the Chitubox home page...? Thanks and keep posting. Lovely inspiring stuff! Guy Oops! Apologies, I've updated the link. https://www.wargaming3d.com/the-complete-and-utter-idiots-guide-to-3d-printing-in-resin-for-wargamers/ 1 1 Link to post Share on other sites More sharing options...
Fat Controller Posted June 24, 2019 Share Posted June 24, 2019 5 hours ago, Locksley said: Painted up one of my OHV prints, very happy with the outcome! Decals are from Railtec, with chalk markings applied using a Prismacolor White pencil. Weathering was mostly with oils. The damage effect looks better once painted but I still think I need to try something different next time. I also printed out a couple more, as well as an ex Soda Ash version with a slightly different door, and a couple of load inserts. I reckon the 'dented' look is spot-on; very much as I remember these wagons. 1 Link to post Share on other sites More sharing options...
Locksley Posted June 24, 2019 Author Share Posted June 24, 2019 55 minutes ago, Fat Controller said: I reckon the 'dented' look is spot-on; very much as I remember these wagons. Thanks Brian! i do want to try again as it would be something that would really set this stuff apart from RTR/kit wagons. The dents on that OHV were done very crudely, essentially the dent is a seperate object laid over the existing wagon sides. Ideally I want to properly deform the sides themselves. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now