RMweb Premium Popular Post Michael Edge Posted June 9, 2020 Author RMweb Premium Popular Post Share Posted June 9, 2020 Boiler and firebox now finished. The firebox top located in the etched groove on the cab front, join between it and the boiler filled with Plastic Padding (or whatever they call it now) as I usually do for belpaire boxes. Side handrails added with a large flange on to the tank front, quite a bit of solder round the handrail pillars after I managed to get the holes in the wrong place and had to move them a bit. The sides of the smokebox saddle are formed from n/s sheet, the top join to the smokebox is Plastic padding again. No cladding bands on the boiler since they will be lined but after much discussion it seems that two of them are actually straps bolted on to the top of the tanks so they will go on. Next job will be out in the garage machining the boiler fittings, I'm glad it's getting a bit warmer again this week. 18 1 5 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted June 18, 2020 Author RMweb Premium Share Posted June 18, 2020 Still not been out to the big lathe but another job started - and halted. This looked a nice interesting job, a London Road (ex George Norton) kit for a Kirtley 0-4-4T. Slightly complicated by being built in P4 but there proved to be just enough room in the splashers for the Sharman wheels, which are somewhat unusually, absolutely perfect. However it's going to be No. 793 in original condition and it became more and more apparent that the kit doesn't really cater for this. I had to add the compensating beam but that wasn't too difficult, problems came above the footplate. The original cabless configuration has the spectacle sheet at the back end of the firebox with shorter side sheets as well - and there simply isn't enough boiler since it stops where the later cab front goes. I don't have a photo of the front of 793 either and I don't know what sort of smokebox door(s) it should have. If anyone knows any more about this please let me know. I was pleased with the way the frames went together though, I don't usually use hornblock systems but this was designed round them - not with springs but a simple compensating beam inside each frame plate. The bogie axles are compensated in the same way and it works really well. So with that stopped I needed something quick and easy. This is the excellent Craftsman kit for the YE 02 0-4-0DH. A few hours work sees all the component parts here laid out - the engine casing and cab back peg neatly into the footplate, the cab interior builds up on the floor and drops in after painting and glazing. The cab roof will be glued on last. It's powered by an n20 motor and spur gearbox, driving the trailing axle through plastic bevel gears, the final drive gear already fitted to the Gibson axle. As an experiment I've scribed the cab back with the lines for the wasp stripes - I'll see how well this works when I paint it. With the casing off the motor fits in much the same position as the full size loco's Rolls Royce engine. This view shows the rebates to take the glazing formed by the two layers of the cab ends, window glazing has already been cut for these. The white metal buffers in the kit aren't very good, replaced by some turned ones with our large heads fitted. The bevel gears are a push fit on the axle and gearbox shaft after boring out to 1/8th" and 3mm respectively. To disengage the drive, as seen in the above photo, the first bevel gear is simply slid back along the shaft. Nothing fancy about the motor fitting, the gearbox frames are the same width as the frame and are simply soldered in place. Everything together, some handrails, lamps and the radiator grille to be fitted after painting which it is now ready for - after a good clean and grit blast. It's a shame Craftsman kits aren't available at the moment (I don't know who has them now) because they are all excellent and very easy to build. Some ideas from these kits went into my own designs a long time ago, starting with the use of .015" brass instead of the usual .012" or less - fitting casing doors separately was another good idea from these. 15 1 3 Link to post Share on other sites More sharing options...
RMweb Premium t-b-g Posted June 18, 2020 RMweb Premium Share Posted June 18, 2020 (edited) I have the Midland 0-4-4T (or one of them) that George Norton built from the kit. We used to borrow it to run it on Narrow Road at shows and I bought it from the family when George died. In EM, the clearances in the splashers are almost non existent. I guess the narrower P4 wheels help slightly. After running it for a while, it developed a short, which turned out to be from the wheels wearing the insulating layer of paint off the inside of the splashers. The bearings had worn slightly allowing the wheels to move around just too much. There isn't room for a layer of 10 thou plasticard or even a layer of paper between wheel and splasher each side without it catching. I really don't fancy stripping it down to replace the bearings or just painting again but I think a smear of epoxy might work. I was so frustrated with it that it went back in a display case and has been there for years. Good luck with yours. They are a really unusual and lovely loco. Edited June 18, 2020 by t-b-g 2 Link to post Share on other sites More sharing options...
Ruston Posted June 18, 2020 Share Posted June 18, 2020 What gauge are you building the 02 to? I've got one of these in my stash and an N20 motor. Link to post Share on other sites More sharing options...
PenrithBeacon Posted June 18, 2020 Share Posted June 18, 2020 (edited) I have two DJH whitemetal examples, one an un-built kit the other a built example of eBay which the vendor thought was EM but it is actually P4 with turned up Romfords! Research showed that the vertical pillar on the side windows is actually the rearmost edge of the front window which has a protective metal or plastic bead on it. Further research showed that only the BR examples (either in BR or private hands) had the footwell commode handles the machines built for private service not having these features. Barrow Hill has a splendidly restored example and when I was there a year last December they were in the process of re-engining another with lots of huffing and puffing. Not an easy job with very limited access. The NRM's example, which once served at Newton Heath and Salford Docks I believe, is generally not available for viewing. I'll try dig out the pictures Edited June 18, 2020 by PenrithBeacon Pictures added 6 1 Link to post Share on other sites More sharing options...
PenrithBeacon Posted June 18, 2020 Share Posted June 18, 2020 8 1 Link to post Share on other sites More sharing options...
PenrithBeacon Posted June 18, 2020 Share Posted June 18, 2020 6 1 1 1 Link to post Share on other sites More sharing options...
PenrithBeacon Posted June 18, 2020 Share Posted June 18, 2020 (edited) I'll do some more later The running number is in-appropriate for a green engine Edited June 18, 2020 by PenrithBeacon more words 7 2 1 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted June 18, 2020 Author RMweb Premium Share Posted June 18, 2020 7 hours ago, Ruston said: What gauge are you building the 02 to? I've got one of these in my stash and an N20 motor. This one is 00 gauge. 1 Link to post Share on other sites More sharing options...
Down_Under Posted June 18, 2020 Share Posted June 18, 2020 Any thoughts on producing/developing a ‘half Janus’ kit Mike? Enjoying your build thread. Cheers, J Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted June 19, 2020 Author RMweb Premium Share Posted June 19, 2020 16 hours ago, PenrithBeacon said: I have two DJH whitemetal examples, one an un-built kit the other a built example of eBay which the vendor thought was EM but it is actually P4 with turned up Romfords! Research showed that the vertical pillar on the side windows is actually the rearmost edge of the front window which has a protective metal or plastic bead on it. Further research showed that only the BR examples (either in BR or private hands) had the footwell commode handles the machines built for private service not having these features. Barrow Hill has a splendidly restored example and when I was there a year last December they were in the process of re-engining another with lots of huffing and puffing. Not an easy job with very limited access. The NRM's example, which once served at Newton Heath and Salford Docks I believe, is generally not available for viewing. I'll try dig out the pictures Thanks for the photos, YE specifically designed the 02 for BR, it isn't the same as any of the standard industrials. The RR C6 engine location is a little unusual, sloping steeply down towards the final drive on the trailing axle but YE followed this in the last two 0-6-0s they built (one of these preserved at Elsecar). The loco at the NRM isn't so much preserved as still working - it was acquired for shunting duties there which it still does as far as I know. In answer to Down Under we have no immediate plans for any YE 0-4-0s but design work on the DE2 0-6-0 is advancing. Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted June 19, 2020 RMweb Premium Share Posted June 19, 2020 19 minutes ago, Michael Edge said: The RR C6 engine location is a little unusual, sloping steeply down towards the final drive on the trailing axle How did they get the oil to stay in the right place Mike? Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted June 19, 2020 RMweb Gold Share Posted June 19, 2020 39 minutes ago, St Enodoc said: How did they get the oil to stay in the right place Mike? I was wondering that. Dry sump maybe? 1 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted June 19, 2020 RMweb Gold Share Posted June 19, 2020 16 hours ago, PenrithBeacon said: The running number is in-appropriate for a green engine They were only ever green in BR days so the number is ok, unless you mean that this particular loco wasn't renumbered into TOPS whilst in BR service? Mike. Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted June 19, 2020 Author RMweb Premium Share Posted June 19, 2020 4 hours ago, Bucoops said: I was wondering that. Dry sump maybe? Yes, it's a dry sump engine. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium DLT Posted June 19, 2020 RMweb Premium Share Posted June 19, 2020 Marvelous work on this topic Mike, very impressive. One quick question: Just how many locos have you got on the go at any one time? All the best, Dave. Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted June 20, 2020 Author RMweb Premium Share Posted June 20, 2020 I can see seven on the test track shelf just now.... (but three are actually finished and waiting for the paintshop) There will be more tucked away in boxes in what one of my customers refers to as the "European kit mountain". It is complicated because some are for me, some are prototypes for Judith while others are just work but I do always have plenty on the go at any one time - it's the variety that keeps me going. Don't forget the layout under construction out in the shed either - and at the moment I can't get to the two layout building jobs underway. I don't suffer much from boredom most of the time. 9 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted June 20, 2020 RMweb Premium Share Posted June 20, 2020 and besides all that he has been fettling wagons and couplings on my stock....enough to send most people into meltdown! Baz 1 2 Link to post Share on other sites More sharing options...
pete_mcfarlane Posted June 20, 2020 Share Posted June 20, 2020 On 19/06/2020 at 09:01, Enterprisingwestern said: They were only ever green in BR days so the number is ok, unless you mean that this particular loco wasn't renumbered into TOPS whilst in BR service? Mike. It's a bit clean compared to how it looked in BR condition, but the livery is definitely right for this particular engine. 10 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted June 20, 2020 Share Posted June 20, 2020 I have very vague memories of them at Allerton. At Southport we had one of the industrial versions masquerading as a BR one. https://www.flickr.com/photos/76178881@N07/7074371887/in/pool-shunters/ It came from Pilkingtons and is now at Preston. https://ribblesteam.org.uk/exhibits/diesel/yorkshire-2677-1960-d2870/ Jason 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Roger Sunderland Posted June 20, 2020 RMweb Premium Share Posted June 20, 2020 There used to be a daily pick up goods that originated at Southport and travelled up the Liverpool /Southport line shunting the sidings at each station- long gone obviously but after the end of steam the 02s worked it for a while. I lived at Ainsdale at the time . It would trundle up about lunchtime, usually only 2 or3 wagons in tow. 2 2 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted June 20, 2020 Author RMweb Premium Share Posted June 20, 2020 I've just counted along the test track shelf again - 9 locos in various stages of incompletion. Some are hard to spot and identify, I'm not sure if anyone will know what they all are either. 9 Link to post Share on other sites More sharing options...
PenrithBeacon Posted June 20, 2020 Share Posted June 20, 2020 (edited) On 19/06/2020 at 09:01, Enterprisingwestern said: They were only ever green in BR days so the number is ok, unless you mean that this particular loco wasn't renumbered into TOPS whilst in BR service? Mike. I understand that 02001-4 were painted blue on renumbering in the TOPS system. I'd be grateful for photos of them in BR service as 02001-4. EDIT photo above shows 02003 in green, thanks for that. Cheers Edited June 20, 2020 by PenrithBeacon Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted June 20, 2020 RMweb Gold Share Posted June 20, 2020 3 minutes ago, PenrithBeacon said: I understand that 02001-4 were painted blue on renumbering in the TOPS system. I'd be grateful for photos of them in BR service as 02001-4. Cheers None were ever painted blue whilst in BR service, the nearest to that is one of the Pensnett ones was repainted by the new owners. A Google search will throw up pictures of the locos you seek. Mike. Link to post Share on other sites More sharing options...
Nova Scotian Posted June 20, 2020 Share Posted June 20, 2020 I counted eight, then had to zoom in to find the ninth! 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now