woodenhead Posted August 5, 2021 Share Posted August 5, 2021 It would be brave of Dapol to head to head and duplicate a 47 or a 37 in O, though the Heljan 37 does have a known flaw, a flaw that would probably stop people mixing makes on the same layout as it would become obvious there is a difference. No, Heljan got the O gauge market for BR diesels long ago and I don't think the market is big enough for duplication like it is in OO - bit like N really in that respect. 1 Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted August 5, 2021 RMweb Gold Share Posted August 5, 2021 I see that it will have "rotating axel (sic) covers". Not learned from Hattons then. At that price, it might be worth doing some European liveries. Should sell well. Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted August 5, 2021 RMweb Gold Share Posted August 5, 2021 Just chatting with Mike and he’s concerned about the windows, thinking they are too far apart and small. Dapol’s pics for comparison. I conversely think the front corner may be too wide? I also think the lights are too close to the fold line? Dapols model pic again for comparisons. 1 1 Link to post Share on other sites More sharing options...
F-UnitMad Posted August 5, 2021 Share Posted August 5, 2021 9 minutes ago, PaulRhB said: the windows, thinking they are too far apart and small. Centre pillar definitely too thick, makes the windows a bit too square rather than rectangular. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted August 5, 2021 RMweb Gold Share Posted August 5, 2021 I think it’s the grey moulded rubber seal making the centre pillar look thick if that was black I think it’s ok, the outside just looks wide on the nearer side to me. Very difficult to tell without a straight on shot though as the light and single colour are playing some tricks. 2 1 Link to post Share on other sites More sharing options...
YesTor Posted August 5, 2021 Share Posted August 5, 2021 (edited) The belly section of the underframe looks too broad in relation to the fuel tanks - whereby the fuel tanks are also not deep enough, as they should finish just slightly lower than the adjacent battery box: If anything, the fuel tanks should be proportionally deeper than the section of underframe from which they are mounted: Best Al Edited August 5, 2021 by YesTor Link to post Share on other sites More sharing options...
RMweb Premium J. S. Bach Posted August 5, 2021 RMweb Premium Share Posted August 5, 2021 (edited) Hmmm, I just received this information in an email this morning from Hatton's: Dapol have revealed an early engineering sample for their forthcoming newly tooled Class 66 in O gauge. This exciting new model will be available in 6 different guises at launch covering usage by EWS, Freightliner, GBRf and DRS. We expect them to arrive by Summer 2022. Features include: Highly detailed model Separately fitted parts Etched grilles with representation of internal equipment Directional, cab and instrument panel lighting Heavy diecast chassis and bogie frames Rotating axleboxes Dual motors Digital & sound capable - 21-pin Accurate tooling variations Due August 2022 7D-066-001 - 66001 in EWS red & gold 7D-066-002 - 66504 in Freightliner Powerhaul green 7D-066-003 - 66709 'Sorrento' in GBRf/ MSC livery 7D-066-004 - 66421 in Direct Rail Services plain blue 7D-066-005 - 66789 'British Rail 1948 to 1997' in BR large logo blue with GBRf branding 7D-066-006 - 66783 'The Flying Dustman' in Biffa red with GBRf branding £285.92 Digital Fitted: £312.32 View all of these Dapol O Gauge Class 66 Locos Edited August 5, 2021 by J. S. Bach Link to post Share on other sites More sharing options...
RMweb Gold Ryde-on-time Posted August 5, 2021 RMweb Gold Share Posted August 5, 2021 33 minutes ago, PaulRhB said: I think it’s the grey moulded rubber seal making the centre pillar look thick if that was black I think it’s ok, the outside just looks wide on the nearer side to me. Very difficult to tell without a straight on shot though as the light and single colour are playing some tricks. I agree. Dapol have put up a head on shot on twitter here: 1 Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted August 5, 2021 RMweb Gold Share Posted August 5, 2021 So using that I’d say fractionally deeper as Mike suggested but wider on the outside not narrowing the pillar and a thinner representation of the seal all round. 1 Link to post Share on other sites More sharing options...
mdvle Posted August 5, 2021 Share Posted August 5, 2021 4 hours ago, Joseph_Pestell said: I see that it will have "rotating axel (sic) covers". Not learned from Hattons then. Other models elsewhere in the world offer rotating axle covers without problems. 2 1 Link to post Share on other sites More sharing options...
RMweb Premium J. S. Bach Posted August 5, 2021 RMweb Premium Share Posted August 5, 2021 25 minutes ago, mdvle said: Other models elsewhere in the world offer rotating axle covers without problems. Atlas, Lionel, and MTH to name e few in O. Even Athearn in HO years ago (30.+) offered them. Link to post Share on other sites More sharing options...
Georgeconna Posted August 5, 2021 Share Posted August 5, 2021 1 hour ago, mdvle said: Other models elsewhere in the world offer rotating axle covers without problems. I find the Wagons Squeak like hell. In OO I don't think its worth it and hardly noticeable. O though is a bigger deal. 1 Link to post Share on other sites More sharing options...
MGR Hooper! Posted August 6, 2021 Share Posted August 6, 2021 8 hours ago, PaulRhB said: Just chatting with Mike and he’s concerned about the windows, thinking they are too far apart and small. Dapol’s pics for comparison. I conversely think the front corner may be too wide? I also think the lights are too close to the fold line? Dapols model pic again for comparisons. But the rubber seals around the window in the EP are also grey. So it's more of an illusion. When I am designing locos, I always do a quite text and apply a texture on the window seals to crosscheck. 1 Link to post Share on other sites More sharing options...
MGR Hooper! Posted August 6, 2021 Share Posted August 6, 2021 And here's the same image with the rubber beading coloured black..... Link to post Share on other sites More sharing options...
RMweb Gold Darius43 Posted August 6, 2021 RMweb Gold Share Posted August 6, 2021 (edited) 8 hours ago, PaulRhB said: So using that I’d say fractionally deeper as Mike suggested but wider on the outside not narrowing the pillar and a thinner representation of the seal all round. If you must do this, you need to use thinner lines as the line thickness adds to the confusion. I used to frequent a US model aircraft web forum where a regular poster used to compare models with photos of the actual aircraft using coloured lines to “prove” they were dimensionally incorrect. What the process actually “proved” was apparent in the responses. The comparison photo of the real loco it is pointing downward and to its left - it is not a true “head on” photo. From there on it becomes very subjective as to whether the loco “looks right”. Even if every dimension on the model scales up exactly to that of the prototype we can easily convince ourselves that it doesn’t “look right” and then search for and find the reasons why. I don’t think that is a path to happiness and inner wellbeing. Cheers Darius Edited August 6, 2021 by Darius43 2 1 Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted August 6, 2021 RMweb Gold Share Posted August 6, 2021 6 minutes ago, Darius43 said: If you must do this, you need to use thinner lines as the line thickness adds to the confusion. I used to frequent a US model aircraft web forum where a regular poster used to compare models with photos of the actual aircraft using coloured lines to “prove” they were dimensionally incorrect. What the process actually “proved” was apparent in the responses. The comparison photo of the real loco it is pointing downward and to its left - it is not a true “head on” photo. From there on it becomes very subjective as to whether the loco “looks right”. Even if every dimension on the model scales up exactly to that of the prototype we can easily convince ourselves that it doesn’t “look right” and then search for and find the reasons why. I don’t think that is a path to happiness and inner wellbeing. Cheers Darius it’s not meant to be an engineering comparison just a rough one on a phone. As I said in the posts earlier the light and plastic colours can play tricks in photos but something looks wrong so hopefully they can catch it. I included the same pic without lines as the effect is more noticeable and the windows don’t look wide enough and as I mentioned Mike and I had different opinions of where so it needs hands on the actual model to check. As I work with them every day I see a lot and at a distance it looked ok at first but then I started to notice something and started comparing to my Flickr album. It’s an EP and just trying to provide positive feedback of what areas to look at 2 2 Link to post Share on other sites More sharing options...
fail safe Posted August 6, 2021 Share Posted August 6, 2021 It's an EP and that's the whole point of posting it to the public. It doesn't look that bad to me, and the unpainted window rubbers give the wrong impression of width. Its pointless drawing lines around it because each picture is taken at a slightly different angle and with a different focal length to the lens. I'm sure Dapol will get this right because they did with the Mk1s where the end corners were incorrect. Now we have the best Mk1 ever produced. 3 Link to post Share on other sites More sharing options...
hmrspaul Posted August 6, 2021 Share Posted August 6, 2021 19 hours ago, MGR Hooper! said: But the rubber seals around the window in the EP are also grey. So it's more of an illusion. When I am designing locos, I always do a quite text and apply a texture on the window seals to crosscheck. But you aren't comparing the same cabs. The model has a two part side window whereas the photos are of the later style with a third window - which could easily affect the width of corner pillars. And the light clusters vary - I have noticed three types. https://PaulBartlett.zenfolio.com/66freightliner/e196eca17 And then your 66060 appears to have something strange going on where the model, correctly, has the 4 lifting lugs, 66060 has only one? And then there are what appears to be a step (??) over the buffers which are different. What we haven't heard is if Dapol are making allowances for the variations in the models Paul Bartlett https://PaulBartlett.zenfolio.com/class66 Link to post Share on other sites More sharing options...
47606odin Posted August 6, 2021 Share Posted August 6, 2021 53 minutes ago, hmrspaul said: But you aren't comparing the same cabs. The model has a two part side window whereas the photos are of the later style with a third window - which could easily affect the width of corner pillars. And the light clusters vary - I have noticed three types. https://PaulBartlett.zenfolio.com/66freightliner/e196eca17 And then your 66060 appears to have something strange going on where the model, correctly, has the 4 lifting lugs, 66060 has only one? And then there are what appears to be a step (??) over the buffers which are different. What we haven't heard is if Dapol are making allowances for the variations in the models Paul Bartlett https://PaulBartlett.zenfolio.com/class66 the removal of the lugs and additional brackets on 060 was the result of fitting the swing out knuckle couplers fitted to EWS 66’s (except 001 and 002 for some reason) 1 Link to post Share on other sites More sharing options...
RMweb Premium J. S. Bach Posted August 7, 2021 RMweb Premium Share Posted August 7, 2021 1 hour ago, hmrspaul said: ...snip...And then there are what appears to be a step (??) over the buffers which are different. ...snip... To stand on when cleaning the windshields? Link to post Share on other sites More sharing options...
159220 Posted August 17, 2021 Share Posted August 17, 2021 I don't see the issue here, as MGR Hopper said, it is an illusion. When scaled down and compared with the Hatton's 66 (bar any drawings of the 66), it looks fine. 1 Link to post Share on other sites More sharing options...
RMweb Gold The Pilotman Posted August 17, 2021 RMweb Gold Share Posted August 17, 2021 On 06/08/2021 at 04:11, Darius43 said: Even if every dimension on the model scales up exactly to that of the prototype we can easily convince ourselves that it doesn’t “look right” and then search for and find the reasons why. I don’t think that is a path to happiness and inner wellbeing. Bullseye 3 Link to post Share on other sites More sharing options...
Courtybella Posted September 4, 2021 Share Posted September 4, 2021 Dpaol had a working sample of the 66 at the SVR show today, to be honest it looked very nice indeed and extremely heavy ! The very nice Dapol chap said it’ll have smoke generators as an option as well as sound etc - expected Q2 2022. 10 1 Link to post Share on other sites More sharing options...
RMweb Gold Adrian Stevenson Posted September 4, 2021 RMweb Gold Share Posted September 4, 2021 I took a couple of pics of it too. As most of you know, I model the 1930’s steam era. But I was very taken with this! It even had the rotating axle boxes. The sheer size of it makes an impression. 5 1 Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted September 4, 2021 RMweb Gold Share Posted September 4, 2021 Just now, Adrian Stevenson said: The sheer size of it makes an impression. You’d like the Aristocraft 1/29th one then 1 1 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now