RobertW Posted December 16, 2019 Share Posted December 16, 2019 Hi, I've recently purchased a Hornby Jinty, and I'm going to repaint it as an industrial loco. I've done some google research, and I've seen the Crigglestone one by Paul Lunn, and the W.Pepper & Sons that Bachmann have done, but are there any other well known industrial liveries that I could use. My microlayout is set in the Manchester area if that helps. Thanks, Rob Link to post Share on other sites More sharing options...
PenrithBeacon Posted December 17, 2019 Share Posted December 17, 2019 Non that I know of Cheers Link to post Share on other sites More sharing options...
Marshall5 Posted December 17, 2019 Share Posted December 17, 2019 The only genuine one I can think of is 47445 which was sold to Hargreaves for use at Crigglestone near Wakefield and had the tanks and other parts painted orange. Colour photos of this have been published. Ray. Link to post Share on other sites More sharing options...
Caledonian Posted December 18, 2019 Share Posted December 18, 2019 Never heard of the Pepper & Sons one. I'm intrigued. Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted December 18, 2019 RMweb Premium Share Posted December 18, 2019 It's the same one, different owners at different times and the same place, British Oak. Coal came from nearby collierys to be tipped into boats on the Calder & Hebble canal. 1 Link to post Share on other sites More sharing options...
RMweb Gold 2mmMark Posted December 18, 2019 RMweb Gold Share Posted December 18, 2019 (edited) There are some various pictures available of 47445, here's one. Tanks & bunker are orange, footplate valance & coupling rods are red, although the rods look mostly black in photos. The Bachmann model is a standard Jinty repainted. 47445 has a few subtle differences. Some boiler fittings, coal rails and handrails have been removed and a sandbox (painted blue) added. The sandbox looks like a Peckett type. I should think the coal rails were removed to aid hand coaling as the loco was only doing short trips in industrial service. I'm building 47445 in 2mm scale for my British Oak mini-layout. There's a short but interesting film on Youtube Mark Edited December 18, 2019 by 2mmMark 5 Link to post Share on other sites More sharing options...
5050 Posted December 18, 2019 Share Posted December 18, 2019 Thanks for posting that, I've not seen it. It's all a lot different around there now. I walked the line down to the staithe before it was lifted and, if you were a collector of bullhead chairs, you would have had a field day! There were all sorts of pre-group ones, obviously obtained many years before, but no chance of getting them at the time sadly. I believe this was the only Jinty sold into industrial use so nowhere near typical for an industrial layout. 1 Link to post Share on other sites More sharing options...
Ruston Posted January 11, 2020 Share Posted January 11, 2020 (edited) I have been looking through some of my old issues of Bylines and in the June/July 1996 issue is a feature on Willamthorpe colliery, near Chesterfield. It appears that in the 1960s the motive power was provided by BR in the form of 3F Jinties that were crewed by NCB men and not only worked the trains for the main line but also internal movements. Unfortunately they all appear to have retained BR livery and were only hired from BR but they do look to be in an unusually scfuffy condition and with buckets, sheets and oil cans all over the running plate, as often seen in industry but not on BR. One was also running without the BR number plate on the smokebox door. They were 47383, 47629, 47313 and 47289. @2mmMark Thanks for posting the video. I often walk my dog on part of the trackbed there and, as 5050 says, you'd hardly recognise it now. I remember seeing the railway there working but it was in its final days and with a Hunslet 0-6-0DH but by then the traffic was only into and out of the BR exchange sidings. The line to the Navigation was out of use, so I never saw that part used and I always wondered how the wagons were shunted onto and off the staithe. Now I know that they ran back by gravity! How are you doing that on your layout? Edited January 11, 2020 by Ruston 2 Link to post Share on other sites More sharing options...
DanielB Posted January 11, 2020 Share Posted January 11, 2020 There are vids on Youtube about how gravity returns are done on the 7mm layout Moving Coal, if that might be inspiration to some? Link to post Share on other sites More sharing options...
DanielB Posted January 11, 2020 Share Posted January 11, 2020 And another: Link to post Share on other sites More sharing options...
RMweb Gold 2mmMark Posted January 12, 2020 RMweb Gold Share Posted January 12, 2020 21 hours ago, Ruston said: I have been looking through some of my old issues of Bylines and in the June/July 1996 issue is a feature on Willamthorpe colliery, near Chesterfield. It appears that in the 1960s the motive power was provided by BR in the form of 3F Jinties that were crewed by NCB men and not only worked the trains for the main line but also internal movements. Unfortunately they all appear to have retained BR livery and were only hired from BR but they do look to be in an unusually scfuffy condition and with buckets, sheets and oil cans all over the running plate, as often seen in industry but not on BR. One was also running without the BR number plate on the smokebox door. They were 47383, 47629, 47313 and 47289. @2mmMark Thanks for posting the video. I often walk my dog on part of the trackbed there and, as 5050 says, you'd hardly recognise it now. I remember seeing the railway there working but it was in its final days and with a Hunslet 0-6-0DH but by then the traffic was only into and out of the BR exchange sidings. The line to the Navigation was out of use, so I never saw that part used and I always wondered how the wagons were shunted onto and off the staithe. Now I know that they ran back by gravity! How are you doing that on your layout? The answer to the gravity shunt question is that I'm not going there. The physics in 2mm scale don't really permit anything realistic. It's all done by loco haulage. I slipped an extra siding into the plan to make it easy to shuffle the wagons around. It's not a layout with immense operational interest, more a demonstration piece for 2mm finescale. 1 Link to post Share on other sites More sharing options...
TonyMay Posted January 28, 2020 Share Posted January 28, 2020 For an industrial loco, there are more typical choices available, even on a budget. An Austerity tank for example, or even a dreaded Smokey Joe. Link to post Share on other sites More sharing options...
moore43grm Posted January 28, 2020 Share Posted January 28, 2020 not the best of pictures, but I have this listed as Calder Grove 3 1 Link to post Share on other sites More sharing options...
5050 Posted January 29, 2020 Share Posted January 29, 2020 You wouldn't recognise it now, covered in trees and greenery and the steel work and concrete all gone years ago. Link to post Share on other sites More sharing options...
Dampflok Posted April 10, 2020 Share Posted April 10, 2020 (edited) Hi all, I'm a bit late to this topic as only just started to re-visit the forum since being in coronavirus lockdown and having a bit more time available... I'm pleased to say that Bachmann used one of my photos of 47445 at Pepper's Yard in order to get the livery right and for publicity - I received a free model in return - thanks! Below are a few photos now on my site - unfortunately, I never managed to get to the staithe by the canal so only ever saw that happening from a distance: The engine having come to grief in March 1969: Images are "clickable" to take you to larger pictures on my site with full captions. At the moment, the three lower pictures are in my "New Additions!" gallery so the above links will only work as long as they are there - they will be moved to the dedicated Industrials gallery after a short time - I will try to remember to update the links when they get moved! Williamthorpe Colliery is also mentioned above - here's a shot of 47289 at the colliery in July 1967: There was also a J94 0-6-0ST working there at the time - No. 68012 in immaculate paintwork - this loco having been moved from the Cromford & High Peak line after closure. Hope that's of some interest! Regards, Geoff Edited April 15, 2020 by Dampflok To correct the loco number! 7 Link to post Share on other sites More sharing options...
RMweb Gold Corbs Posted April 11, 2020 RMweb Gold Share Posted April 11, 2020 Lovely pictures Geoff, thanks for sharing. Link to post Share on other sites More sharing options...
relaxinghobby Posted April 13, 2020 Share Posted April 13, 2020 When faced with what to do to private industrialised jinty's I did a similar colour scheme to the orange one in the pictures above. To hide the LMS identity I painted the sides green and the roof and bunker red oxide and put the owning companies name on the side with transfers. Bachmann jinty shunts at Umbridge. I used to have a copy of Mainline to Industry by Frank Jones ( Lightmoor Press ). A photo album, I can't remember if there were any jintys or what the colours were as it is black and white. Most of the locos seemed well covered in grime. Link to post Share on other sites More sharing options...
Caledonian Posted April 14, 2020 Share Posted April 14, 2020 47745 is recorded in Frank Jones' book [the only Jinty recorded as a "sale"], but there's no photie Link to post Share on other sites More sharing options...
Rockalaucher101 Posted June 29, 2020 Share Posted June 29, 2020 So I've been detailing a Hornby Jinty to resemble 47445 only to find that the clack valve on the right hand side of the loco was removed... Great, that's a lot of time wasted scratch building it... Suppose I could exercise some artistic license Link to post Share on other sites More sharing options...
Marshall5 Posted June 29, 2020 Share Posted June 29, 2020 Are you sure that you mean the "clack valve"? On Jinties the clacks were on the backhead (combined with the injector steam valves). I think you might be referring to the vacuum brake ejector which was on the RHS of the boiler/smokebox and was probably removed when 47445 went into industrial service - being unlikely to work vacuum fitted stock in its new role. Ray. 1 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted June 29, 2020 RMweb Premium Share Posted June 29, 2020 Some Jinties (not sure about 47445) were never vacuum brake fitted but as the above said the feed clacks were always on the firebox backhead with the injectors. Link to post Share on other sites More sharing options...
Rockalaucher101 Posted July 3, 2020 Share Posted July 3, 2020 On 29/06/2020 at 16:54, Marshall5 said: Are you sure that you mean the "clack valve"? On Jinties the clacks were on the backhead (combined with the injector steam valves). I think you might be referring to the vacuum brake ejector which was on the RHS of the boiler/smokebox and was probably removed when 47445 went into industrial service - being unlikely to work vacuum fitted stock in its new role. Ray. Oh so that's what that is... When looking for a quick replacement that's what they popped up as on the usual auction site. I've decided to leave it on for now, but it should be fairly easy to snap off if I change my mind. Link to post Share on other sites More sharing options...
RMweb Gold Corbs Posted July 3, 2020 RMweb Gold Share Posted July 3, 2020 That extra sandbox looks very much like the late model Avonside one used in the kit that Adam designed. If anyone wants one let me know and I'm sure we can print a couple. 1 Link to post Share on other sites More sharing options...
RMweb Gold Adam FW Posted July 3, 2020 RMweb Gold Share Posted July 3, 2020 46 minutes ago, Corbs said: That extra sandbox looks very much like the late model Avonside one used in the kit that Adam designed. If anyone wants one let me know and I'm sure we can print a couple. I'd have to agree the extra sandbox on 47445 looks very similar to the square avonside design As Corbs mentioned, I've been modelling an avonside for 3D printing including these sandboxes if there's interest I can probably make some extras. The base is a little chunky so it can be sanded back to remove any support material marks Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now