10800 Posted January 9, 2020 Author Share Posted January 9, 2020 (edited) Station building now finished apart from roofs, canopy, basic interior and final details, and painting. Edited January 9, 2020 by 10800 10 Link to post Share on other sites More sharing options...
10800 Posted January 12, 2020 Author Share Posted January 12, 2020 (edited) Canopy now fitted and roof draped on. The roof uses Wills pantiles rather than the etched ply included in the kit. At the moment the roof is only glued along the ridge line. The benefit of putting all the rafters on (supposedly 'optional') is clear. There is a slight bow in the roof on the main building - this will be straightened when it is completely glued down. The ply roofs will come in handy for the nominal interior. The canopy at the left end (below) didn't quite fit perfectly and was standing out from the wall by about 1mm; some small fillets from the fret waste of the same material was cut and inserted - from this picture you can't tell. Edited January 12, 2020 by 10800 7 1 Link to post Share on other sites More sharing options...
Philip D Posted January 12, 2020 Share Posted January 12, 2020 Just stumbled on this post. What an interesting project you are developing! And the PLM station model by Bois Modelism may be just what I need for my HOe project to re-create something to represent the metre gauge line that used to run near my second home in Normandy. Didn't realise there might be something out there that gets so close to la gare de Brecey 1 Link to post Share on other sites More sharing options...
10800 Posted January 14, 2020 Author Share Posted January 14, 2020 On 01/01/2020 at 18:25, 10800 said: What do you think the colour scheme should be? Typical photos suggest light cream with pale blue/grey for the woodwork, but I'm open to suggestions. What about the corner stones and door/window surrounds? Existing structures are often in a pale pink base colour, but I don't know if they are original or repaints after line closure. I just received from Architecture & Passion (in Labouheyre in SW France, and very efficiently) another laser-cut kit for a Midi toilet/lamp room (ref. 874021). As well as very nice colour photo instructions, they helpfully provide three options for Midi building colour schemes (although is this pre-PO and pre-SNCF? I'll ask them). These are Option 1 - light grey walls, white stonework and details, medium brown doors and windows Option 2 - off-white walls, medium grey stonework, brown or medium grey doors etc Option 3 - very light ochre/ochre pink walls, light grey stonework, medium brown doors etc For now I have the acrylics for option 3 (Vallejo), but it can always be repainted later if wrong. 1 1 Link to post Share on other sites More sharing options...
10800 Posted January 14, 2020 Author Share Posted January 14, 2020 Also from Architecture & Passion was this for a barrière roulante, laser cut (!) in what looks like the same card material as the station details, but 1mm thick. 4 Link to post Share on other sites More sharing options...
rue_d_etropal Posted January 14, 2020 Share Posted January 14, 2020 station bulding looks good. Just need to find reaso for the bigger building. Also not sure about the tiles. Although the round 'pantile' ones are common in the area, the ones I have seen on local station buildings are the flatter ones. I personally prefer the round ones, but I do wonder why the flatter ones were used. Possibly the way they are fitted is more secure as I have been told the round ones can slip over time. Slate tile roofs can also be found in the area, but I think mainly churches, possibly linked to the Norman influence at the time of the Cathars. Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted January 14, 2020 RMweb Gold Share Posted January 14, 2020 Those Wills Pantiles are not a very good representation of the tuile canal that is typical of the Midi. As you note, stations, and indeed "public" buildings in general, often use tuile mecaniques. I think that Redutex produced a sheet for tuiles mecaniques. The other way to produce these is to find a Jouef Ouest timber goods shed which has nice large roof sheets, a plastic moulding. You can take a rubbing using aluminium kitchen foil which you then stiffen up by spraying with matt varnish. 1 Link to post Share on other sites More sharing options...
10800 Posted January 14, 2020 Author Share Posted January 14, 2020 I can see your point, but they're on now and will have to do. They are better than the very flat sheets provided in the kit anyway. 1 Link to post Share on other sites More sharing options...
rue_d_etropal Posted January 15, 2020 Share Posted January 15, 2020 Once painted and weathered they won't be so obvious. They look like the Plastruct/Slaters ones you have used. They are not quite the typicall'Spanish pantile' I have on my house, but I think I have sen moden versions with a side lip to link tiles together. One of the problems with laser cutting is that tiles look too flat. The Redutex ones do look good. I had a close look at O scale ones recently, but they stilldid not look quite right for some tiles. Had not looked closely at the Jouef model . Interesting. It would be nice to have some detailed(ie drawings) showing shape of different tiles, as I have done some for 3D printing. 1 Link to post Share on other sites More sharing options...
10800 Posted January 18, 2020 Author Share Posted January 18, 2020 Now painted and pretty much finished - roof slightly weathered but I won't finish it until I have all the layout buildings done so they can all be weathered consistently. And I will have to add the name to the end walls. 9 3 Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted January 20, 2020 RMweb Gold Share Posted January 20, 2020 I think this is a different kind of catenary support (taken near Dax) but I thought it might be of interest for the stork nest: They come back each year and there are several nests along the same stretch of track. 7 Link to post Share on other sites More sharing options...
10800 Posted January 20, 2020 Author Share Posted January 20, 2020 Brilliant, thanks BT! I am planning a transition from these ogives to conventional masts, but I don't recall seeing any storks in the area I am basing the layout on. I will inquire of my friends. What they do have is hoopoes, so I ought to have one or two of those ... 1 Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted January 20, 2020 RMweb Gold Share Posted January 20, 2020 Other than the in the middle of Dubai, where they seem to be prevalent, the only place I've ever seen hoopoes was the Camargue. I also saw rollers there for the one and only time. Enjoying this thread, a very interesting and inspiring project. 1 Link to post Share on other sites More sharing options...
10800 Posted January 20, 2020 Author Share Posted January 20, 2020 The other 'typical' bird in the area of interest is the black redstart, including nesting at the gite where I stay. I don't know if that's just a hotspot or if they are quite widespread. But not dramatic enough to model! Rollers would be nice, but I've only ever seen them in Africa and Pakistan. 1 Link to post Share on other sites More sharing options...
rue_d_etropal Posted January 21, 2020 Share Posted January 21, 2020 are you going to have background sound as cicadas are very common in the area? Link to post Share on other sites More sharing options...
Neils WRX Posted January 21, 2020 Share Posted January 21, 2020 Looks really good, watching this thread with interest. i especially like the “old style catenary” I remember it from a visit to the area in the 1990’s. Thanks, Neil 1 Link to post Share on other sites More sharing options...
10800 Posted January 22, 2020 Author Share Posted January 22, 2020 Another building, somewhat smaller this time - a Midi lamp room/WC from 'Architecture et Passion'. 7 Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted January 22, 2020 RMweb Gold Share Posted January 22, 2020 On 21/01/2020 at 09:25, rue_d_etropal said: are you going to have background sound as cicadas are very common in the area? If near a river, the sound of frogs can be even more loud than the cicadas. 1 Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted January 22, 2020 RMweb Gold Share Posted January 22, 2020 On 20/01/2020 at 14:11, Barry Ten said: I think this is a different kind of catenary support (taken near Dax) but I thought it might be of interest for the stork nest: They come back each year and there are several nests along the same stretch of track. There would be. Storks congregate so you will see lots of nests in close proximity - or none at all. I don't know why they choose some sites over others that seem similar. Better food source perhaps. Those nests look quite comfortable. In Spain and Portugal one sees a lot of nests balanced on top of the telegraph posts. 1 Link to post Share on other sites More sharing options...
rue_d_etropal Posted January 22, 2020 Share Posted January 22, 2020 1 hour ago, Joseph_Pestell said: If near a river, the sound of frogs can be even more loud than the cicadas. can't say I have heard frogs down there. Cicadas are definitely noisy, and surprisingly big Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted January 23, 2020 RMweb Gold Share Posted January 23, 2020 13 hours ago, rue_d_etropal said: can't say I have heard frogs down there. Cicadas are definitely noisy, and surprisingly big From the pics I have just seen on the morning news, many of the frogs will have been washed away downstream. I will have to phone and check that the house is OK. At least the kitchen is on the first floor now and the washing machine on a plinth. 3 Link to post Share on other sites More sharing options...
10800 Posted January 26, 2020 Author Share Posted January 26, 2020 A bit more tracklaying today. Other things are keeping me busy so it's a question of getting the odd hour in when I can. 10 Link to post Share on other sites More sharing options...
RMweb Gold Joseph_Pestell Posted January 29, 2020 RMweb Gold Share Posted January 29, 2020 On 14/01/2020 at 17:22, Joseph_Pestell said: Those Wills Pantiles are not a very good representation of the tuile canal that is typical of the Midi. As you note, stations, and indeed "public" buildings in general, often use tuile mecaniques. I think that Redutex produced a sheet for tuiles mecaniques. The other way to produce these is to find a Jouef Ouest timber goods shed which has nice large roof sheets, a plastic moulding. You can take a rubbing using aluminium kitchen foil which you then stiffen up by spraying with matt varnish. I see in the Peco Spring Newsletter that Wills are to do tuiles mecaniques or, as they strangely call them, lozenge tiles. But if in their usual small format, probably not big enough for a station building. Link to post Share on other sites More sharing options...
10800 Posted January 29, 2020 Author Share Posted January 29, 2020 How's your house Joseph? Link to post Share on other sites More sharing options...
10800 Posted February 2, 2020 Author Share Posted February 2, 2020 Tracklaying now all done apart from the extreme ends (I haven't worked out the fiddle yard arrangements yet) and the back siding which will be built around the buildings and not the other way round. Next I will rotate the whole thing 90 degrees forwards in order to fit all the droppers on the plain line (points are already done), then another 180 degrees which will show the underside at the front so I can get on with wiring and point motors. Then it will be testing that it all works before ballasting, and after that catenary. 8 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now