RMweb Premium John M Upton Posted January 15, 2020 RMweb Premium Share Posted January 15, 2020 Hello I am looking for a preferably late model Ford Sierra saloon in 1:148 N scale. I have tried a search on Shapeways but have found nothing (although it has to be said Shapeway's search function is awful!) Anyone got any possibilities? I would consider a continental N scale version if nothing else is available. 1 Link to post Share on other sites More sharing options...
m0rris Posted January 15, 2020 Share Posted January 15, 2020 Hi John, Wiking did a 1/160 Sierra XR4 as part of a set of 3 80s cars, but I have not found anything else. Ref. the shapeways search, the key is to use as few words as possible, the more you add the more answers you get... Unfortunately, still no sign of a ford sierra though. 1 1 Link to post Share on other sites More sharing options...
BernardTPM Posted January 16, 2020 Share Posted January 16, 2020 I used the Wiking XR4i as a basis for a 5-door Sierra, though it still has the earlier front: 5 2 Link to post Share on other sites More sharing options...
RMweb Premium John M Upton Posted January 16, 2020 Author RMweb Premium Share Posted January 16, 2020 I've just taken a look at Wiking's website and it doesn't look like the Sierra is made anymore, not in 1:160 at any rate. Time to go searching the second hand market.... Link to post Share on other sites More sharing options...
m0rris Posted January 16, 2020 Share Posted January 16, 2020 (edited) I had to spend a wee while tracking one down, your best bet is fishing through any ebay listings of 1/160 car joblots to spot a Sierra... edit to add - found one, it is a little pricey though https://www.ebay.co.uk/itm/Wiking-PKW-Set-7-4-teilig-Spur-N-1-160/293202994381?hash=item444442a4cd:g:bPcAAOSwlqtdZPwL Edited January 16, 2020 by m0rris Link to post Share on other sites More sharing options...
BernardTPM Posted January 16, 2020 Share Posted January 16, 2020 I'm pretty certain the other three aren't the same three that came with the Sierra when new. Still potential for chopping though, I'm sure. Link to post Share on other sites More sharing options...
grahame Posted January 16, 2020 Share Posted January 16, 2020 The lack of 1980s 1:148 scale vehicles is an anathema. There is the new 2020 range announcement from ODC due very soon. Might be something suitable but I wouldn't hold my breath. They seem to have massively scaled back on N gauge and the little they have produced is heavily skewed to the 50s and early 60s steamy era. 1 Link to post Share on other sites More sharing options...
RobjUK Posted January 17, 2020 Share Posted January 17, 2020 Some of the sites in this list may be worth a look - I've not found a Sierra yet, but I've not looked through every site in detail.. http://nscalevehicles.org/resources.php This is pretty close for a four door: http://www.ghqmodels.com/store/51003.html 1 Link to post Share on other sites More sharing options...
grahame Posted January 17, 2020 Share Posted January 17, 2020 (edited) That's a great list on that website although it is primarily aimed at the American market so the majority are 1:160 N scale rather than British 1:148 N gauge. Here's another old list of vehicles (including military, construction, etc subjects) that includes various N gauge scales including Japanese at 1:150: The old British cast white metal ranges from the likes of Langley, Fleetline and P&D Marsh may well include a Ford Sierra. One notable addition is RailNscale who produce 3D printed vehicles (available through Shapeways) and offer many in 1:148 scale. Edited January 17, 2020 by grahame 1 Link to post Share on other sites More sharing options...
Mike Harvey Posted January 17, 2020 Share Posted January 17, 2020 (edited) 10 hours ago, grahame said: The lack of 1980s 1:148 scale vehicles is an anathema. There is the new 2020 range announcement from ODC due very soon. Might be something suitable but I wouldn't hold my breath. They seem to have massively scaled back on N gauge and the little they have produced is heavily skewed to the 50s and early 60s steamy era. I agree that we would be very lucky to see any 1980s vehicles in 1/148 scale in next week’s announcements, not for want of direct lobbying by me and others I am sure. Should have bought more Cortinas :-). Curiously Oxford’s N announcements have been consistently around 30 vehicles per annum since they started in N, and that reduced only marginally in 2019 . The year 2018 saw 31, and 2019 saw 28 new announcements. What they have achieved is a reduction in the backlog of items announced but not yet released. December 2017 - 26, December 2018 - 23, December 2019 - 15. So as of today, taking account of this week’s delivery of two vehicles, the outstanding models date from January 2018 - 1 (due to delay in licensing approval by the operator), January 2019 - 1, June 2019 - 6, October 2019 - 5. 2019 was the first year when no tooling in 1/148 was announced, influenced strongly by the uncertain economic and political situation. I am assured that there is a plan for ongoing new tooling in N, some ready to go, and which may well be announced next week. Escort, Marina, Viva........ Edited January 17, 2020 by Mike Harvey Spelling 1 Link to post Share on other sites More sharing options...
grahame Posted January 17, 2020 Share Posted January 17, 2020 3 hours ago, Mike Harvey said: I agree that we would be very lucky to see any 1980s vehicles in 1/148 scale in next week’s announcements, not for want of direct lobbying by me and others I am sure. Should have bought more Cortinas I don't think that's the solution, but it would be nice to know what sales of the ODC Cortina have been and in comparison with a similar saloon cars from 10 to 20 years earlier. However, the Cortina Mk3 (1970-76) is probably a little early for the 1980s. The Mk4 (76-79) and Mk5 (79-83) would be more appropriate. 1 Link to post Share on other sites More sharing options...
RMweb Gold Stuart A Posted January 17, 2020 RMweb Gold Share Posted January 17, 2020 (edited) The best selection of 80s cars is probably the 3d printed ones from https://railnscale.com/vehicles-cars/ , though relatively expensive considering they need painting etc edit, notice Graham has already mentioned them Edited January 17, 2020 by Stuey realised already mentioned Link to post Share on other sites More sharing options...
RMweb Premium John M Upton Posted January 17, 2020 Author RMweb Premium Share Posted January 17, 2020 MK3 Cortinas managed to survive in reasonable numbers to the end of the 1980's but usually in 'Questionable MOT' condition... Link to post Share on other sites More sharing options...
ianmacc Posted January 18, 2020 Share Posted January 18, 2020 Here’s one in a set of six. The Sierra came with the two other 1980s cars as a set of three when new. The other three older era cars were another set of three. Also so there’s a set of similar era cars from p and d marsh but they’re terrible. Particularly the metro and cortina! 1 Link to post Share on other sites More sharing options...
BernardTPM Posted January 18, 2020 Share Posted January 18, 2020 That's not a miniMetro, more a maxiMetro! Link to post Share on other sites More sharing options...
ianmacc Posted January 20, 2020 Share Posted January 20, 2020 On 18/01/2020 at 23:54, BernardTPM said: That's not a miniMetro, more a maxiMetro! Looking again I think the beetle and the Capri are based on the wiking models as they’re quite accurate. It’s the cortina and metro that are home grown affairs. P and D Marsh make some excellent item so not denigrating them by any means but I think N Gauge cars may not be their strength. Link to post Share on other sites More sharing options...
quicksilvercoaches Posted January 20, 2020 Share Posted January 20, 2020 On 18/01/2020 at 23:54, BernardTPM said: That's not a miniMetro, more a maxiMetro! It looks nothing like a Maxi More like a Vauxhall Chevette if anything. Is it really supposed to be a Metro as I would never have guessed? Link to post Share on other sites More sharing options...
BernardTPM Posted January 20, 2020 Share Posted January 20, 2020 Or perhaps a wide-body Reliant Kitten in TT scale Link to post Share on other sites More sharing options...
grahame Posted January 20, 2020 Share Posted January 20, 2020 Unfortunately no Sierra in the new year announcement today from ODC for 2020. Apparently it was very disappointing for N gauge with no all new models scheduled and just five reliveries of existing ones. 1 Link to post Share on other sites More sharing options...
RMweb Premium John M Upton Posted January 21, 2020 Author RMweb Premium Share Posted January 21, 2020 Well I have put my bid in on the job lot mentioned above, I can always move the others in the lot on if they don't fit in! Now I want to find a N scale Rover SD1... Not holding my breath... Link to post Share on other sites More sharing options...
ianmacc Posted January 23, 2020 Share Posted January 23, 2020 On 21/01/2020 at 00:19, John M Upton said: Well I have put my bid in on the job lot mentioned above, I can always move the others in the lot on if they don't fit in! Now I want to find a N scale Rover SD1... Not holding my breath... Good luck with the bid and the SD1! Maybe you convert a Sierra? Can’t end up any worse than the Metro! 1 Link to post Share on other sites More sharing options...
ianmacc Posted January 23, 2020 Share Posted January 23, 2020 On 16/01/2020 at 00:00, BernardTPM said: I used the Wiking XR4i as a basis for a 5-door Sierra, though it still has the earlier front: Excellent work. That Sierra and the Vauxhall could pass for OO easily. 1 Link to post Share on other sites More sharing options...
RMweb Premium John M Upton Posted January 23, 2020 Author RMweb Premium Share Posted January 23, 2020 I was the only bidder so somewhere in the postal system is a box of cars.... 2 Link to post Share on other sites More sharing options...
cbfasi Posted March 16, 2020 Share Posted March 16, 2020 I am unsure where its from but I have a 1:148 Sierra Sapphire (Dad owned a F reg one) It was brought as unpainted metal, so that may narrow it down a bit, but I cannot as yet remember whom I got it from. Its out there but clearly not easy to find. Will update when I remember... 1 Link to post Share on other sites More sharing options...
ianmacc Posted March 20, 2020 Share Posted March 20, 2020 On 23/01/2020 at 23:39, John M Upton said: I was the only bidder so somewhere in the postal system is a box of cars.... Assume they arrived ok. Just picking this thread up again. The other cars in the lot are (1) an E30 BMW 3 series so very much suitable for an 80s layout as they were made from 1983 onwards and we’re commonplace (2) a E class Mercedes from circa 1986 onwards (one for the doctor or barrister of the town) and less everyday but certainly not scarce. The out of period ones are a huge Opel Diplomat from the late 1960s (also a contemporary matchbox toy subject at the time in about 1/64) used mainly by the wealthy and I suspect actual diplomats! Others were a BMW 500 series saloon of the 1930s and a very regal looking rolls Royce. If the three oddball ones that one would actually be useful to model the ubiquitous wedding scene in your church! 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now