pendlerail Posted January 26, 2020 Share Posted January 26, 2020 Hi all, I run my layout with DR5000 and the Z21 app, and today I will not accept certain addresses as Locos? when I enter them it will not allow me to change direction or move them, the same applies with my wireless maus, they are entered into the library as locos, they are not in some small address range, so far have found - 73, 90, 6441, 6800, other locos I try work perfectly, Can anyone help? Phil Link to post Share on other sites More sharing options...
alangdance Posted January 26, 2020 Share Posted January 26, 2020 Have you tried running them through the DR5000 App to see where the issues is. Link to post Share on other sites More sharing options...
pendlerail Posted January 26, 2020 Author Share Posted January 26, 2020 DR5000 app? Didn't know there is one, is that Android? Link to post Share on other sites More sharing options...
WIMorrison Posted January 26, 2020 Share Posted January 26, 2020 No, it isn't an app, it is a program that only runs under windows. You should have used it already to configure the DR5000? Link to post Share on other sites More sharing options...
pendlerail Posted January 27, 2020 Author Share Posted January 27, 2020 Yeah. Realised afterwards. Couldn't see a reason. Could move the Locos using the computer but still not with the Phones? Link to post Share on other sites More sharing options...
WIMorrison Posted January 27, 2020 Share Posted January 27, 2020 almost certain that the phone isn't connected to the DR5000, normally that is the issue as people gave their phones connected to their local network when at home. The phone needs to be connected to the DR5000 Link to post Share on other sites More sharing options...
pendlerail Posted January 27, 2020 Author Share Posted January 27, 2020 Only certain trains won't be controlled by the App, The phone in question is only used with the DR5000, the home network has been deleted, most trains work fine, it is just a few that it will not accept, my Wireless Maus also will not accept them, I fear it is a brand of decoder that will not work with the system, as some of them are hard wired in! but I am sure they have worked previously, so not a wi fi issue, I am afraid, Thanks Link to post Share on other sites More sharing options...
pendlerail Posted January 27, 2020 Author Share Posted January 27, 2020 However I have just tried the same app on a different phone connected to the home network and it does work?!!! Answers anybody?? Phil Link to post Share on other sites More sharing options...
RMweb Gold BoD Posted January 27, 2020 RMweb Gold Share Posted January 27, 2020 Delete and reinstall the App on the original phone? Link to post Share on other sites More sharing options...
pendlerail Posted January 27, 2020 Author Share Posted January 27, 2020 Both phones work fine if connected to the home wi fi. Very strange Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now