virginhst539 Posted February 7, 2020 Share Posted February 7, 2020 Been fitting a loksound decoder to a Bachmann 66 today. Got it ready to go speaker soldered to it and plugged it onto the loco and nothing. Tried to find it using the ESU 50200 controller and it just kept bouncing back 'error' on both program track and on program on main 'POM'. Noticed when trying to locate the controller which has not had an update since I owned it only had up to the V3 chip to select. I had the chip fitted to a freight liner 66 before upgrading the speaker to a road rails one. Have I killed the chip or is a possible fault with the loco/controller Link to post Share on other sites More sharing options...
40034_Nick Posted February 8, 2020 Share Posted February 8, 2020 Hi.. This bit of kit is worth the money for testing decoders. You can eliminate the problems to decoder or loco. http://www.esu.eu/en/products/decoder-tester/ https://www.coastaldcc.co.uk/products/esu/53900-decoder-tester 1 Link to post Share on other sites More sharing options...
virginhst539 Posted February 8, 2020 Author Share Posted February 8, 2020 Could be worth a try, I had the loco on the program track and no matter how I tried to find it I just got error back. Really hoping I have not wreaked it connecting the speaker wires even after I was extra careful in doing so Link to post Share on other sites More sharing options...
JJGraphics Posted February 8, 2020 Share Posted February 8, 2020 20 hours ago, virginhst539 said: the controller which has not had an update since I owned it only had up to the V3 chip to select Sounds like you need to update the Firmware on your ECoS before you go any further. Follow the instructions carefully to upgrade the Firmware. Sign-in to the ESU website with your user id (create one if you have not got one already) to look at the section with the downloads for the ECoS. John Link to post Share on other sites More sharing options...
virginhst539 Posted February 8, 2020 Author Share Posted February 8, 2020 Hopefully that works, will give it a try next week Link to post Share on other sites More sharing options...
gwrcollet Posted February 14, 2020 Share Posted February 14, 2020 Hi I had a problem with a v5 loksound decoder esu5200 would not find it I thought it was a problem with the decoder it turn out that you have to have Railcom and Railcom PLus turned on then it will work ok Bryan 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now