meatloaf Posted March 31, 2020 Share Posted March 31, 2020 Hi all Which decoders are recommended for the DJM 14xx and J94? Cheers Link to post Share on other sites More sharing options...
Robin Verth Posted March 31, 2020 Share Posted March 31, 2020 I have 2 DJM J94's one is fitted with a Hatton's 6 pin DCC Decoder and runs with no problems, the other has had a Bachmann, then Hatton's and finally a Gaugemaster , it did not matter which decoder was fitted when not selected the loco would suddenly race off, then stop then randomly start and stop, when the loco was selected, it would start OK then randomly speed up, slow down, stop, reverse direction, this happened with both a Hornby Elite and an ECoS controller, I converted the loco back to DC and now runs with no problems, the Decoders were tested on a Decoder Tester and all ran faultlessly, the loco has been relegated to a DC shunting layout and replaced on the DCC layout by a Hornby J94. I have never had any of these problems with any other loco's, it may be an isolated case/incident. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now