APT Fan Posted May 9, 2020 Share Posted May 9, 2020 (edited) Good Morning, I've just joined the forum and this is my first post, so please don't be too hard on me! I couldn't see an 'Introduce Yourself' thread, so I'll provide a bit of context on my background. I use to have a nice setup in the mid 80's whilst I was a teenager and recently I uncovered some of my old set during a loft clearance which consisted of an APT, 2 HSTs, a Deltic and an 09 shunter, plus a bit of rolling stock. I thought I'd have a go at restoring the set whilst sticking to that mid 80's theme. The Deltic is green and doesn't appear to match the era, so I've just bought a blue Lima Class 47 which needs a bit of work. The Lima Class 47 needs replacement buffers, which I've read on here actually forms part of the fixings between the chasis and the body. I've sourced the replacements but I don't like the look of them as they are cast metal and don't look to be finished very well. I've also seen some 'Hornby Class 47 buffers' which look much nicer and are plastic - will these fit? Also, I have a question on fitting these with them being part of the fixtures between body and chasis, are these to be glued in? Edited May 9, 2020 by APT Fan typo 1 Link to post Share on other sites More sharing options...
GWR-fan Posted May 9, 2020 Share Posted May 9, 2020 These are the Hornby class 47. They are a push fit (do not glue). https://www.ebay.com.au/itm/Hornby-X9774-Class-47-Round-Buffers-Pk4/323324320138?hash=item4b47a1998a:g:wfgAAOSwoHJbN0Gc Link to post Share on other sites More sharing options...
APT Fan Posted May 9, 2020 Author Share Posted May 9, 2020 4 minutes ago, GWR-fan said: These are the Hornby class 47. They are a push fit (do not glue). https://www.ebay.com.au/itm/Hornby-X9774-Class-47-Round-Buffers-Pk4/323324320138?hash=item4b47a1998a:g:wfgAAOSwoHJbN0Gc Thanks for the reply. Yes! they are the one's that I've spotted - will they fit the Lima? These are the one's listed for Lima:- https://www.hattons.co.uk/392873/peter_s_spares_psp_35_metal_round_large_buffers_for_lima_locomotives_pack_of_four/stockdetail.aspx#15890167113132&_command=reamaze%3Aresize&_height=350&_name=_embed_0&_url= Or (out of stock) https://www.petersspares.com/lima-l5627-06-round-large-buffers-for-class-20-class-47-pk4-black-shaft-oo-gauge.ir Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted May 9, 2020 RMweb Gold Share Posted May 9, 2020 There are excellent replacement sprung Oleo buffers here.... https://railexclusive.com//products.php?cat=14 But cant comment on how they will fit Lima models. No connection other than very happy customer... 1 1 Link to post Share on other sites More sharing options...
westernviscount Posted May 9, 2020 Share Posted May 9, 2020 2 hours ago, APT Fan said: Good Morning, I've just joined the forum and this is my first post, so please don't be too hard on me! I couldn't see an 'Introduce Yourself' thread, so I'll provide a bit of context on my background. I use to have a nice setup in the mid 80's whilst I was a teenager and recently I uncovered some of my old set during a loft clearance which consisted of an APT, 2 HSTs, a Deltic and an 09 shunter, plus a bit of rolling stock. I thought I'd have a go at restoring the set whilst sticking to that mid 80's theme. The Deltic is green and doesn't appear to match the era, so I've just bought a blue Lima Class 47 which needs a bit of work. The Lima Class 47 needs replacement buffers, which I've read on here actually forms part of the fixings between the chasis and the body. I've sourced the replacements but I don't like the look of them as they are cast metal and don't look to be finished very well. I've also seen some 'Hornby Class 47 buffers' which look much nicer and are plastic - will these fit? Also, I have a question on fitting these with them being part of the fixtures between body and chasis, are these to be glued in? Welcome to RMWEB APT. Where did you source the buffers from? Whitemetal often have residual ridges and bumps from the casting process that can taken back with some light filing. Painting the buffer but leaving the shank bare metal should lead to a life like finish. Whichever method you choose, i hope you are successful. Link to post Share on other sites More sharing options...
APT Fan Posted May 9, 2020 Author Share Posted May 9, 2020 5 hours ago, westernviscount said: Welcome to RMWEB APT. Where did you source the buffers from? Whitemetal often have residual ridges and bumps from the casting process that can taken back with some light filing. Painting the buffer but leaving the shank bare metal should lead to a life like finish. Whichever method you choose, i hope you are successful. Thank you! I haven't bought the buffers yet but found the metal Lima one's at Hatton's (see link above) and the Hornby plastic one's on Ebay. Both items are 'Peters Spares' so I've emailed them directly for advice. I was thinking about what GWR-fan said in that these are push fit which suggests they are an interference fit so they need to be the correct item. This might sound a bit daft but rather than glue, I was going to use a bit of silicon sealer, I tend to use this approach when I want to secure something whilst allowing relatively easy removal. I must say that it is nice to see that Hatton's is still going albeit online only, which is a bit of a shame. I used to love going to their shop in Smithdown Road, Liverpool and I'd say that the majority of my models were purchased there. A few new one's but most were second hand, usually with a few bits missing, but all I could afford at the time. Those old model shops were great! I'm very impressed with this Lima Class 47, the detailing is very good and much better than earlier Lima's. I'm a fan of the 47 but I always thought the Hornby model (R.075?) was awful, very crude and boxy and the body just didn't seem to sit right above the bogies. I was reading on here about the 'paint guides' on the body which I always thought a bit odd, but never worked out why they were there until now. Link to post Share on other sites More sharing options...
Guest Half-full Posted May 9, 2020 Share Posted May 9, 2020 Hi APT Fan Welcome to RMWeb and welcome back to railway modelling The Hornby 47 buffers do push in, but the holes in the chassis frame will need reamed out a little bit. Note that the Hornby buffers are a little short in length, but good enough to complete the 47. Of all the 47's available, I still think the LIma moulding is the best, with the Vi-Trains running a close second. Adding wire handrails and lamp irons to the cab front is an easy, quick upgrade, which can really lift the look of the loco. Hornby Railroad Class 47's use the LIma bodyshell and chassis/bogie mouldings (though they are changed a bit to accommodate the new motor) Hatton's do still have a bricks and mortar shop, in WIdnes, though they are operating online only during this virus crisis. Link to post Share on other sites More sharing options...
westernviscount Posted May 9, 2020 Share Posted May 9, 2020 Sorry APT i mis-read it. Those metal lima buffers look awful. I know these things can get a bit confusing if lots of people throw different ideas at you. Romford do oleos and are sold here.. https://www.hamodels.net/romford-oleo-buffers-black.html It is years since i had a lima 47 but it was a superb model. I don't recall how it all fitted together I'm afraid. I also had a Hornby 47 which was originally quite rough which my dad repainted into intercity and named it galloway princess. He sanded all the paint lines and fitted flush glaze which was above and beyond really as i am sure i was only 6 or 7 but it must have had a huge impact on me!! In fact i have created a forum about modelling memories which i must include this in!!! Returning to this hobby is such a good thing and i hope your 47 progresses nicely! Link to post Share on other sites More sharing options...
Pete the Elaner Posted May 9, 2020 Share Posted May 9, 2020 1 hour ago, APT Fan said: I'm very impressed with this Lima Class 47, the detailing is very good and much better than earlier Lima's. I'm a fan of the 47 but I always thought the Hornby model (R.075?) was awful, very crude and boxy and the body just didn't seem to sit right above the bogies. I was reading on here about the 'paint guides' on the body which I always thought a bit odd, but never worked out why they were there until now. The buffers do indeed hold the body onto the chassis. Do not be tempted to glue these because you will make a mess if you ever need to remove the body again. This is the only model I am aware of which fits together this way. They seem to squeeze through & 'plop' into place. Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted May 9, 2020 RMweb Gold Share Posted May 9, 2020 20 minutes ago, Pete the Elaner said: The buffers do indeed hold the body onto the chassis. Do not be tempted to glue these because you will make a mess if you ever need to remove the body again. This is the only model I am aware of which fits together this way. They seem to squeeze through & 'plop' into place. Ah no Heljan Clayton is the same Pete ... the buffers and 4 clips between body and chassis. I ditch the buffer arrangement and rely on the clips which are all the other Heljan locos we have use. Does the Lima 47 have clips too? 1 Link to post Share on other sites More sharing options...
meld Posted May 9, 2020 Share Posted May 9, 2020 10 hours ago, APT Fan said: Thanks for the reply. Yes! they are the one's that I've spotted - will they fit the Lima? These are the one's listed for Lima:- https://www.hattons.co.uk/392873/peter_s_spares_psp_35_metal_round_large_buffers_for_lima_locomotives_pack_of_four/stockdetail.aspx#15890167113132&_command=reamaze%3Aresize&_height=350&_name=_embed_0&_url= Or (out of stock) https://www.petersspares.com/lima-l5627-06-round-large-buffers-for-class-20-class-47-pk4-black-shaft-oo-gauge.ir These listed Buffers for the Hornby 47 do indeed fit the Lima Class 47, as they are the same model! Lima went into receivership and Hornby bought up the company and have re-issued certain Models under the Hornby Branding changing the Motor and drive system where necessary. HTH Meld 1 Link to post Share on other sites More sharing options...
Titan Posted May 9, 2020 Share Posted May 9, 2020 38 minutes ago, Pete the Elaner said: The buffers do indeed hold the body onto the chassis. Do not be tempted to glue these because you will make a mess if you ever need to remove the body again. This is the only model I am aware of which fits together this way. They seem to squeeze through & 'plop' into place. The Lima Class 20 uses the same buffers which hold the body on in the same way. 1 Link to post Share on other sites More sharing options...
andyman7 Posted May 9, 2020 Share Posted May 9, 2020 I had exactly the same issue. To be clear, there are two types of Hornby Class 47. There are versions made from original Hornby tooling (now retired) - these buffers DO NOT fit the Lima Class 47. However, Hornby also own the ex-Lima tooling and have reissued the Lima model in the Hornby Railroad range. The buffers for these are identical to the Lima ones and fit a Lima model. 1 Link to post Share on other sites More sharing options...
APT Fan Posted May 9, 2020 Author Share Posted May 9, 2020 (edited) 1 hour ago, westernviscount said: Returning to this hobby is such a good thing and i hope your 47 progresses nicely! The plan is to fit lighting and eventually DCC, I've an electronics background, so I'm comfortable with that side. I fitted the four HST cars out with led's last week and the effect is fantastic, although I think the led units that they sell should be fitted with better low pass filtering, but that should be an easy fix. It was great getting the soldering iron out again! The DCC side should give me a chance to use my software skills, I've already had a Traintronics signal operating from my laptop via an Arduino, so there is plenty of fun in store. I'm really not confident about repairing bodywork or painting at the moment, I'm going to buy aerosol paints to give me the option of spraying or bushing. Edited May 9, 2020 by APT Fan 1 1 Link to post Share on other sites More sharing options...
GWR-fan Posted May 9, 2020 Share Posted May 9, 2020 10 hours ago, APT Fan said: Thanks for the reply. Yes! they are the one's that I've spotted - will they fit the Lima? These are the one's listed for Lima:- I was aware that Hornby had made its own class 47, but as the listing description states that the buffers fit both class 47 and class 20 and Hornby's release of a class 20 was the ex-Lima model, then these buffers should fit. As stated by another, the original Lima buffers and those that were once listed for sale by Peters Spares were the longer shank version, whereas the current version have a shorter shank length. Link to post Share on other sites More sharing options...
Lee Clarke Posted May 10, 2020 Share Posted May 10, 2020 Hi @APTfan I'm same boat as you thinking of returning to the hobby after about 20 years, I've got two of those Lima 47s with etched brass replacement grilles with working fans on little motors. I've got at least 9 good locos and 3 multiple units and an HST, all hardly used, been in boxes in the loft for 20 years .....I'm avoiding getting my stuff from the loft because I don't want the disappointment if I don't have any track (can't afford to buy any at present) can't remember exactly what is up there.... getting more tempted every day,.... sooner or later with all the good stuff I'm seeing from other modellers, I'll have to climb up and retrieve the boxes. Link to post Share on other sites More sharing options...
APT Fan Posted May 10, 2020 Author Share Posted May 10, 2020 3 hours ago, Lee Clarke said: Hi @APTfan I'm same boat as you thinking of returning to the hobby after about 20 years, I've got two of those Lima 47s with etched brass replacement grilles with working fans on little motors. I've got at least 9 good locos and 3 multiple units and an HST, all hardly used, been in boxes in the loft for 20 years .....I'm avoiding getting my stuff from the loft because I don't want the disappointment if I don't have any track (can't afford to buy any at present) can't remember exactly what is up there.... getting more tempted every day,.... sooner or later with all the good stuff I'm seeing from other modellers, I'll have to climb up and retrieve the boxes. It does seem a shame to simply leave them in storage, they were designed for action. I think one of the most important parts of owning a set is building it up and developing it further and budget is very important, we all have to start somewhere and usually that means modest beginings. At the moment despite having some nice pieces, I only have a first radius loop fitted to a board made from scrap wood from my shed. I can pack the board away against a wall after use, eventually I'd like to move the layout to the loft but have a lot of work to do before I can get there. 1 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted May 10, 2020 RMweb Gold Share Posted May 10, 2020 58 minutes ago, APT Fan said: It does seem a shame to simply leave them in storage, they were designed for action. I think one of the most important parts of owning a set is building it up and developing it further and budget is very important, we all have to start somewhere and usually that means modest beginings. At the moment despite having some nice pieces, I only have a first radius loop fitted to a board made from scrap wood from my shed. I can pack the board away against a wall after use, eventually I'd like to move the layout to the loft but have a lot of work to do before I can get there. I can’t have a permanent layout but for a test track I use Kato HO track ... the HV5 set is a good start Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted May 10, 2020 RMweb Gold Share Posted May 10, 2020 On 09/05/2020 at 14:15, westernviscount said: Whitemetal often have residual ridges and bumps from the casting process that can taken back with some light filing. Nooooo, please, nooooo. Put the buffer in a pin vice and whilst holding it vertically, gently rub it an off centre circular motion on a padded piece of fine abrasive such as a sponge manicure board. A lot easier to control, and you can get the domed effect without much effort. Lanarkshire Model Supplies do locomotive Oleo buffers of both sizes. Mike. 1 Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted May 10, 2020 RMweb Gold Share Posted May 10, 2020 58 minutes ago, APT Fan said: It does seem a shame to simply leave them in storage, they were designed for action. I think one of the most important parts of owning a set is building it up and developing it further and budget is very important, we all have to start somewhere and usually that means modest beginings. At the moment despite having some nice pieces, I only have a first radius loop fitted to a board made from scrap wood from my shed. I can pack the board away against a wall after use, eventually I'd like to move the layout to the loft but have a lot of work to do before I can get there. I can’t have a permanent layout but for a test track I use Kato HO track ... the HV5 set is a good start Link to post Share on other sites More sharing options...
westernviscount Posted May 11, 2020 Share Posted May 11, 2020 18 hours ago, Enterprisingwestern said: Nooooo, please, nooooo. Put the buffer in a pin vice and whilst holding it vertically, gently rub it an off centre circular motion on a padded piece of fine abrasive such as a sponge manicure board. A lot easier to control, and you can get the domed effect without much effort. Lanarkshire Model Supplies do locomotive Oleo buffers of both sizes. Mike. Ha ha ha, yes yes Mike i mis-spoke (tyoed) when saying filing! I actually use these... https://www.hobbycraft.co.uk/modelcraft-extra-flexi-slim_line-sanders-3-pack/643084-1000?_br_psugg_q=sanding+tools I got them free from a woodworking magazine as it happens. cheers for now. 1 Link to post Share on other sites More sharing options...
RobMG Posted May 16, 2020 Share Posted May 16, 2020 I am doing a Lima 47, and had the same problem to find decent authentic looking buffers. I eventually discovered the SLW do the correct oleo buffers as an accessory. The Oleo buffers are very distinctive so you need decent ones. The original Lima buffers look good but are plastic, so are rubbish really. They do indeed hold the body in place , but I will find an alternative method achieving that. The Slw buffers are sprung and look the dogs b+++++s Don't bother with anything else. White metal or whatever. If you look at Phil Bullocks post he has given you a link . Rob 1 Link to post Share on other sites More sharing options...
APT Fan Posted May 22, 2020 Author Share Posted May 22, 2020 (edited) The Hornby buffers fit the Lima perfectly, a nice interference fit with long shafts extending and securing the body to the chassis. Looks pretty good to me and I think this loco could have the potential to detail up towards the rascal in the picture next to it. Edited May 22, 2020 by APT Fan 1 Link to post Share on other sites More sharing options...
Class158 Posted June 19, 2020 Share Posted June 19, 2020 On 09/05/2020 at 11:45, APT Fan said: Good Morning, I've just joined the forum and this is my first post, so please don't be too hard on me! I couldn't see an 'Introduce Yourself' thread, so I'll provide a bit of context on my background. I use to have a nice setup in the mid 80's whilst I was a teenager and recently I uncovered some of my old set during a loft clearance which consisted of an APT, 2 HSTs, a Deltic and an 09 shunter, plus a bit of rolling stock. I thought I'd have a go at restoring the set whilst sticking to that mid 80's theme. The Deltic is green and doesn't appear to match the era, so I've just bought a blue Lima Class 47 which needs a bit of work. The Lima Class 47 needs replacement buffers, which I've read on here actually forms part of the fixings between the chasis and the body. I've sourced the replacements but I don't like the look of them as they are cast metal and don't look to be finished very well. I've also seen some 'Hornby Class 47 buffers' which look much nicer and are plastic - will these fit? Also, I have a question on fitting these with them being part of the fixtures between body and chasis, are these to be glued in? Hello I’m new too but I am missing a buffer off a Lima 47 and mine to remove the body you need to remove the buffers no need to glue I am a newbie to modelling so please tell me how to get buffers and if you wanted to know I am replacing my buffers (as they are green which sticks out like a sore thumb). Link to post Share on other sites More sharing options...
cypherman Posted June 19, 2020 Share Posted June 19, 2020 Hi all, Ok the best place I have found to get just about any thing spares wise is Peters Spares. The shop is unfortunately shut at the moment. But the do sell via Ebay. I managed to get a set of class 47 buffers from them that way. So this is their Ebay items for sale listing. https://www.ebay.co.uk/sch/petersspares/m.html?_nkw=&_armrs=1&_ipg=&_from= and this is their Ebay shop listing. https://www.ebay.co.uk/str/peterssparesmodelrailwaysltd Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now