locospotter Posted May 29, 2020 Share Posted May 29, 2020 I have secondhand Pendolino set by Hornby but don't know how to get body off dummy car as I wish to see if a dcc function decoder has been fitted or not. Link to post Share on other sites More sharing options...
WIMorrison Posted May 29, 2020 Share Posted May 29, 2020 Stick it on the programming track and read CV1, if you get an address it has a decoder - no address then probably no decoder at which point you take the top off :) Link to post Share on other sites More sharing options...
locospotter Posted May 29, 2020 Author Share Posted May 29, 2020 Thanks for your quick reply Iain I should have given more details the set is all non powered I have modified the front car to be towed and has kadee fitted but I want to get rear lights to work with dcc decoder, the lights come on when I use 9volt battery white and red when I change battery terminals round and for some reason white lights occasionally come when towed around I the layout. I have tried programmin track on my Lenz 100 but just get error 2. Do I have to undo connector with spring on to release the body which I have started to do. Link to post Share on other sites More sharing options...
smokebox Posted May 29, 2020 Share Posted May 29, 2020 (edited) See this maintenance sheet. https://www.Hornby.com/uk-en/downloads/view/download/item/219 It may take a short time to fully open. Edited May 29, 2020 by smokebox More details added Link to post Share on other sites More sharing options...
locospotter Posted May 29, 2020 Author Share Posted May 29, 2020 Thanks Smoke box I didn't pull front down hard enough to release body off the front first. Link to post Share on other sites More sharing options...
locospotter Posted May 29, 2020 Author Share Posted May 29, 2020 I now have the body off and it's a Hornby decoder that has 7 straight connections don't know if it can be programmed as I want to change the lights to show red not white. Link to post Share on other sites More sharing options...
RMweb Gold Matt C Posted May 30, 2020 RMweb Gold Share Posted May 30, 2020 You say the lights occasionally come on when its towed round ? Is it just getting intermitent power then ? Possibly a wheel clean to improve electrical pickup might help. Also you mention that its made up of unpowered units so you would need to put it on the programming track with a powered unit, program the cvs as you wish and then re set the decoder in the powered unit, once the unpowered unit is set up. With a normal powered set this is how you set it up. Put both units on the programming track. Program the number, and cv values for the dummy car (there needs to be a motor load to program the decoder) This will program BOTH decoders, you then remove the dummy car and Then set up the decoder in the powered car with its own number and cv values HTH Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now