RMweb Premium boxbrownie Posted May 30, 2020 RMweb Premium Share Posted May 30, 2020 OK...call me an optimist but I found an old Loksound V3.5 I had forgotten all about, it is a wired chip.....BUT.......the wires all go to what looks exactly like a normal (current) 21 pin connector at the edge of the board, the trailing wires are all just soldered to the socket pads........am I correct in the hope that I could just cut off the wires/insulate them/whatever.....and plug the chip into a 21 pin Loco ? Link to post Share on other sites More sharing options...
SRman Posted May 30, 2020 Share Posted May 30, 2020 It certainly looks like you could plug it straight in. Try it before cutting the wires. Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted May 30, 2020 Author RMweb Premium Share Posted May 30, 2020 I would if I was confident it won’t blow something up..... Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted May 30, 2020 Author RMweb Premium Share Posted May 30, 2020 (edited) 2 minutes ago, Richard Croft said: I've done it the other way round where I only had a 21 pin decoder but needed 8 and soldered the wires from a spare harness onto those solder pads, done it on Loksound 3.5's and 4's and it worked, so I cant see why it wouldn't work the other way like you are planning. Richard OK that’s reassuring, logically it should work I am just be over cautious. Now I need to find a decent 100 ohm speaker for the job though, the original Loksound speakers really were “only just” good enough........ I just had the decoder hard wired to my Lias decoder tester and it works fine, just need to gather the ooomph to chop the wires and plug it into the 21 pin socket connection. Edited May 30, 2020 by boxbrownie Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted June 17, 2020 Author RMweb Premium Share Posted June 17, 2020 Oops, bit of a late update, after testing plugged onto the 21pin on the tester everything worked, so “off with the wires” and into the 108....all working great. Never knew the Loksound 3.5 came as a 21 pin......now I do Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now