TomScrut Posted July 1, 2020 Share Posted July 1, 2020 3 minutes ago, Darius43 said: simple tape measure would be more accurate I'd expect that it's so they can go and take loads of photos with staffs in place to work from pics easily, and then anything critical would be done by tape or laser etc. When all's said and done 3 inches equates to 1mm on the model so I don't think measuring equipment accuracy is the issue, it's the amount of attention put into turning the measurements into a model and the right measurements being taken. 1 3 Link to post Share on other sites More sharing options...
MGR Hooper! Posted July 1, 2020 Author Share Posted July 1, 2020 (edited) 35 minutes ago, phil gollin said: . Errrrr ...... No ! It is something that ANYONE who knows about surveying will laugh out loud at immediately, much like trying to brush a floor by holding a broom by its brush. It is a joke. . If it worries you so much, drop a member of their development team a message and share your concerns, I'm sure they'll "improve" their posing next time. PM the gentleman who posted right before you, he'll sort his team out for the next blog so that the experts in surveying won't have to die of laughter. Edited July 1, 2020 by MGR Hooper! 3 1 Link to post Share on other sites More sharing options...
RMweb Gold Darius43 Posted July 1, 2020 RMweb Gold Share Posted July 1, 2020 5 minutes ago, TomScrut said: I'd expect that it's so they can go and take loads of photos with staffs in place to work from pics easily, and then anything critical would be done by tape or laser etc. When all's said and done 3 inches equates to 1mm on the model so I don't think measuring equipment accuracy is the issue, it's the amount of attention put into turning the measurements into a model and the right measurements being taken. Woe betide Hornby if they were out by 1mm. It would destroy the belief systems of some on RMWeb. Cheers Darius 11 Link to post Share on other sites More sharing options...
TomScrut Posted July 1, 2020 Share Posted July 1, 2020 39 minutes ago, Darius43 said: Woe betide Hornby if they were out by 1mm. It would destroy the belief systems of some on RMWeb. Cheers Darius Yes in fairness 1mm would be a noticeable error. The point was that if they can't measure the thing to within 3 inches they ought to pack up anyway. And if it's less than a mm error on the model I don't think that many people will be getting their pitchforks out. 2 Link to post Share on other sites More sharing options...
Peter Eaton Posted July 1, 2020 Share Posted July 1, 2020 (edited) If you where travelling 3rd class in 1850 AD would it matter if the door was 3 mm narrow? But then millimetres may not have been even been invented. Any Hornby errors could be retro made to the original coach also. Then are we not in the perfect world again. Just order 3 (Am happy)... Ho just asking - couplings ? on the model. Edited July 1, 2020 by Peter Eaton update Link to post Share on other sites More sharing options...
truffy Posted July 1, 2020 Share Posted July 1, 2020 19 minutes ago, Peter Eaton said: If you where travelling 3rd class in 1850 AD would it matter if the door was 3 mm narrow? It's 3" (1mm @ 4mm scale), not 3mm. And whether or not that's significant for a door width probably depends on whether or not you're wearing a hooped dress. Link to post Share on other sites More sharing options...
MGR Hooper! Posted July 1, 2020 Author Share Posted July 1, 2020 29 minutes ago, Peter Eaton said: just asking - couplings ? on the model. The wagons (ummm open carriages) will come with couplings (just like the ones in the train packs) Link to post Share on other sites More sharing options...
TomScrut Posted July 1, 2020 Share Posted July 1, 2020 44 minutes ago, MGR Hooper! said: wagons Human cattle wagons 1 Link to post Share on other sites More sharing options...
RMweb Gold tomparryharry Posted July 1, 2020 RMweb Gold Share Posted July 1, 2020 5 hours ago, boxbrownie said: Not many experts from back then alive at the present time Aaah! But that was before the internet! Link to post Share on other sites More sharing options...
CUCKOO LINE Posted July 1, 2020 Share Posted July 1, 2020 We now have 3 threads on Hornby re Rocket and one on Rails, geiting a bit confusing 1 Link to post Share on other sites More sharing options...
MGR Hooper! Posted July 1, 2020 Author Share Posted July 1, 2020 41 minutes ago, CUCKOO LINE said: We now have 3 threads on Hornby re Rocket and one on Rails, geiting a bit confusing There's one thread for Hornby's Stephenson's Rocket, one thread to cover the latest announcement which is the 3rd Class Open Coach and the last threat is the one for The Engine Shed where the latest edition discussed these models. HTH with managing the threads? Link to post Share on other sites More sharing options...
Edge Posted July 1, 2020 Share Posted July 1, 2020 5 hours ago, Pre Grouping fan said: The 2nd class coaches had benches and 3rd was standing room only apparently. So that is the only difference between the 2 from what I've read in other threads. as far as I know, at this period, the class system was based upon stagecoaches and primarily related to the speed at which the coaches were operated on the L&M - First class coaches were non-stop, second class had some intermediate stop, and third class was the ‘local’ service stopping everywhere. After a while, it was decided that having the trains stop everywhere and have different specifications of coach was more profitable. hence, I don’t think that there was actually a physical difference between second and third class L&M carriages at the start, at least Link to post Share on other sites More sharing options...
stewartingram Posted July 1, 2020 Share Posted July 1, 2020 3 hours ago, truffy said: It's 3" (1mm @ 4mm scale), not 3mm. And whether or not that's significant for a door width probably depends on whether or not you're wearing a hooped dress. I only wear one on a Friday..... 1 5 Link to post Share on other sites More sharing options...
HonestTom Posted July 2, 2020 Share Posted July 2, 2020 18 hours ago, Peter Eaton said: If you where travelling 3rd class in 1850 AD would it matter if the door was 3 mm narrow? But then millimetres may not have been even been invented. Any Hornby errors could be retro made to the original coach also. Then are we not in the perfect world again. Just order 3 (Am happy)... Ho just asking - couplings ? on the model. Back then, metric measurements might have been considered dangerously French. 1 1 Link to post Share on other sites More sharing options...
CUCKOO LINE Posted July 2, 2020 Share Posted July 2, 2020 (edited) Seems to be still available for pre-order everywhere apart from Rails. Edited July 2, 2020 by CUCKOO LINE Link to post Share on other sites More sharing options...
RMweb Gold tomparryharry Posted July 2, 2020 RMweb Gold Share Posted July 2, 2020 2 hours ago, Lantavian said: And yet the Victorians built many thousands of miles of railways in the British Empire to metre gauge. I've never been able to work out why. One metre is three foot three and three-eighths inches. Why not just make the gauge three foot three inches? Quite easy really. One day, a man shows up, representing X government or country, wanting his railway built. In his bag is a big wad of cash.... "Certainly Sir, how wide would you like your track?" 1 2 Link to post Share on other sites More sharing options...
No Decorum Posted July 2, 2020 Share Posted July 2, 2020 3 hours ago, Lantavian said: And yet the Victorians built many thousands of miles of railways in the British Empire to metre gauge. I've never been able to work out why. One metre is three foot three and three-eighths inches. Why not just make the gauge three foot three inches? Why not Cape Gauge (3' 6")? The meeting of metre gauge and Cape gauge is causing some head scratching in Africa now. Link to post Share on other sites More sharing options...
MGR Hooper! Posted July 2, 2020 Author Share Posted July 2, 2020 2 hours ago, CUCKOO LINE said: Seems to be still available for pre-order everywhere apart from Rails. I think RoS gave everyone who had their own version on pre-order a chance to order first. I ordered one from RoS just seconds after it was listed. 1 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted July 2, 2020 Share Posted July 2, 2020 19 hours ago, Edge said: as far as I know, at this period, the class system was based upon stagecoaches and primarily related to the speed at which the coaches were operated on the L&M - First class coaches were non-stop, second class had some intermediate stop, and third class was the ‘local’ service stopping everywhere. After a while, it was decided that having the trains stop everywhere and have different specifications of coach was more profitable. hence, I don’t think that there was actually a physical difference between second and third class L&M carriages at the start, at least Seconds had seats and later a rudimentary roof that curtains could be hung from. I doubt they worked the same way as stage coaches worked. There was after all only two tracks and the line has changed very little in the last 190 years. The second and third class trains probably worked at times nobody else wanted to travel. Still better than walking which is what most poorer people would have done previously. Worth remembering it's only 30 odd miles. Jason Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted July 2, 2020 RMweb Premium Share Posted July 2, 2020 40 minutes ago, MGR Hooper! said: I think RoS gave everyone who had their own version on pre-order a chance to order first. I ordered one from RoS just seconds after it was listed. Rails have now said they have sold out their pre order and are trying to secure more stock. 1 Link to post Share on other sites More sharing options...
CUCKOO LINE Posted July 2, 2020 Share Posted July 2, 2020 According to Hattons there will be two batches of deliveries. One in Sept and another later in the year 1 Link to post Share on other sites More sharing options...
RMweb Gold tomparryharry Posted July 2, 2020 RMweb Gold Share Posted July 2, 2020 (edited) 4 hours ago, Lantavian said: A fair point. East African Railways' metre-gauge rolling stock, was, I heard, built to be easily convertible to 3'6". Mind you, all the new railways in East Africa now are standard gauge. I thought all new railways are built to 'standard' gauge. The 'Ghan' in Australia was re-built to standard. Edited July 2, 2020 by tomparryharry Spellinge misteak. Link to post Share on other sites More sharing options...
Mel_H Posted July 2, 2020 Share Posted July 2, 2020 On 01/07/2020 at 11:08, Coryton said: Anyone else surprised at that price? Even allowing for a possible desire to undercut Rails? Edited to add: Just seen the Rails announcement myself, including the comment "the incredible low RRP". (I don't think in the original announcement they explicitly said it was 3-d printed, though I think the material they were using suggested that it was). Given that it’s essentially only a 4-wheel wagon, I thought Rail’s comment was a little snide. 2 Link to post Share on other sites More sharing options...
Mel_H Posted July 2, 2020 Share Posted July 2, 2020 On 01/07/2020 at 12:22, Legend said: Exactly ! Hornby will be making money on those . Its just a different manufacturing method . It does kind of hint at more to come . Given the success of Rocket I wonder if Lion will be next . Certainly seemed to be a lot of people asking for it in Jennys Monday Club . And , of course , there is the tie in with the Titfield Thunderbolt. I feel sorry for Rails . They had a great idea , but unfortunately Hornby are ahead of them . They have handled it very well though and I hope they can go onto develop their 3D printing in another way . As other have pointed out , could they announce a range of Mk4 coaches.............................. Having now carefully read Hornby’s post on its Engine Shed blog, I have no doubt that Lion is on its way. I think the clue is there if you look ! 2 Link to post Share on other sites More sharing options...
RMweb Premium Legend Posted July 3, 2020 RMweb Premium Share Posted July 3, 2020 14 hours ago, scumcat said: I personally think lion and these coaches would have been for 2021 but rails have forced their hand. I think there is a danger you can read to much into things . Coincidences in life do happen . We did know that Hornby were making an announcement on 1st July , I think for at least a week before , which predated Rails announcement . Of course they were maybe going to announce a TPE 802 or range of Mk4s but decided to go with Limited Edition of 1000 L&MR trucks instead .....nah I don't think so. 4 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now