mattkimster Posted March 9, 2021 Share Posted March 9, 2021 I must say, I got a super speedy reply from Michael that put my mind at ease, and for which I'm very grateful! Now I can get back to looking forward to hearing about further updates about this project in the coming months, while patiently waiting for the chance to order a GT3 in the 2nd run... Link to post Share on other sites More sharing options...
Philip Jackson Posted April 19, 2021 Share Posted April 19, 2021 My 1st part payment has gone through 1 Link to post Share on other sites More sharing options...
truffy Posted April 20, 2021 Share Posted April 20, 2021 I’m gonna hold back until I get my GT3. 2 1 1 Link to post Share on other sites More sharing options...
RMweb Gold toboldlygo Posted April 20, 2021 RMweb Gold Share Posted April 20, 2021 On 19/04/2021 at 11:04, Philip Jackson said: My 1st part payment has gone through Same here 2 Link to post Share on other sites More sharing options...
JSpencer Posted May 1, 2021 Share Posted May 1, 2021 Got their news letter yesterday and some early cads have been started/done. Looks promising. Not easy to compare with photos and drawings of my Leader books (I guess or at least would hope, they referred to them, a great source). Link to post Share on other sites More sharing options...
decauville1126 Posted May 1, 2021 Share Posted May 1, 2021 26 minutes ago, JSpencer said: Not easy to compare with photos and drawings of my Leader books Way back I got a lot of the OPC/NRM joint-venture microfiched drawings for the Leader, so they're probably still available via the NRM. 1 Link to post Share on other sites More sharing options...
Edge Posted May 1, 2021 Share Posted May 1, 2021 Haven’t received the newsletter myself (maybe it will arrive at some point - I’m definitely signed up) - any chance someone could pop the early CADs up on here for perusal? Link to post Share on other sites More sharing options...
Wickham Green too Posted May 2, 2021 Share Posted May 2, 2021 23 hours ago, decauville1126 said: Way back I got a lot of the OPC/NRM joint-venture microfiched drawings for the Leader, so they're probably still available via the NRM. Hmmmm .......... I've got one of the OPC/NRM Leader drawings too - but it's more a pushme-pullyou spamcan than the loco as actually built ! Link to post Share on other sites More sharing options...
Lillian_R Posted May 2, 2021 Share Posted May 2, 2021 On 01/05/2021 at 16:36, Edge said: Haven’t received the newsletter myself (maybe it will arrive at some point - I’m definitely signed up) - any chance someone could pop the early CADs up on here for perusal? Here you go 5 Link to post Share on other sites More sharing options...
Edge Posted May 4, 2021 Share Posted May 4, 2021 Thank you Link to post Share on other sites More sharing options...
Popular Post KR Models Posted May 7, 2021 Author Popular Post Share Posted May 7, 2021 First renders of the artwork. 28 1 1 1 Link to post Share on other sites More sharing options...
Lillian_R Posted May 9, 2021 Share Posted May 9, 2021 Oh wow those look nice...deffo want to order one in black when I can ♥ Link to post Share on other sites More sharing options...
Michael Hodgson Posted May 9, 2021 Share Posted May 9, 2021 11 hours ago, Lillian_R said: Oh wow those look nice...deffo want to order one in black when I can ♥ Me too - but first I want some of the stuff I've already ordered and paid for from this firm. 1 Link to post Share on other sites More sharing options...
Edge Posted May 11, 2021 Share Posted May 11, 2021 I made the right choice with the lined grey, but oooh that black one looks good 1 2 Link to post Share on other sites More sharing options...
wainwright1 Posted May 12, 2021 Share Posted May 12, 2021 (edited) I wonder if one of the 3D printing firms will be producing a crew for this loco. Unfortunately KR have not shown the side of the loco with the fireman's window/doorway open and the fireman in a string vest hanging out sweating his whatsits off !!! Looking forward to this model very much. Ray Edited May 12, 2021 by wainwright1 Link to post Share on other sites More sharing options...
RMweb Premium JDW Posted May 12, 2021 RMweb Premium Share Posted May 12, 2021 On 08/03/2021 at 05:00, KR Models said: No, info@krmodels.co.uk doesnt get checked at all. Email me personally at michael@krmodels.co.uk I don't know how well known the info@... email address is, but considering it exists and someone had found it and was using it to try and make contact, might it not be wise to set up a divert so any emails are redirected to michael@...? Should be quick and simple to do, and mean no emails are missed (so no grumpy customers!) When one of our colleagues left, his messages were diverted to my address, so we never miss emails - and even now, a year later, people still try and email him. 4 Link to post Share on other sites More sharing options...
Lillian_R Posted May 12, 2021 Share Posted May 12, 2021 On 08/03/2021 at 05:00, KR Models said: No, info@krmodels.co.uk doesnt get checked at all. Email me personally at michael@krmodels.co.uk ahh that might explain why the email I sent via the website 'contact us' page probably didnt get answered and its been over a month, wasnt sure if on a break or something >_> Link to post Share on other sites More sharing options...
Edge Posted June 18, 2021 Share Posted June 18, 2021 Just had my third payment go out - looking forward to seeing the model in the flesh 2 Link to post Share on other sites More sharing options...
wainwright1 Posted June 19, 2021 Share Posted June 19, 2021 21 hours ago, Edge said: Just had my third payment go out - looking forward to seeing the model in the flesh Me too ! Ray Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted June 20, 2021 RMweb Gold Share Posted June 20, 2021 May be in the next batch, you could be controversial and do BR blue :-) 1 Link to post Share on other sites More sharing options...
Lillian_R Posted June 22, 2021 Share Posted June 22, 2021 On 20/06/2021 at 13:22, adb968008 said: May be in the next batch, you could be controversial and do BR blue :-) Agreed! Fictional liveries are really cool and interesting, would deffo be awesome to see one in Green or Blue like being proposed with the Clayton, although I know I'd personally get a Blue one ♥ 1 Link to post Share on other sites More sharing options...
Wickham Green too Posted June 23, 2021 Share Posted June 23, 2021 On 20/06/2021 at 13:22, adb968008 said: May be in the next batch, you could be controversial and do BR blue :-) ....... or Network SouthEast ..... or SouthWestern trains/Railway ...... or ....................... 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted June 23, 2021 RMweb Gold Share Posted June 23, 2021 1 hour ago, Wickham Green too said: ....... or Network SouthEast ..... or SouthWestern trains/Railway ...... or ....................... Just slap a Thameslink logo & yellow ends on the grey one, then your good to go. Link to post Share on other sites More sharing options...
Philip Jackson Posted June 24, 2021 Share Posted June 24, 2021 On 19/06/2021 at 12:11, wainwright1 said: Me too ! Ray And Me Link to post Share on other sites More sharing options...
Philip Jackson Posted June 24, 2021 Share Posted June 24, 2021 A Southern Green one would look awesome Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now