Jump to content

South Tawton. A (smaller) phoenix rises


Recommended Posts

Posted (edited)

Like many others on here this is a bit of a lockdown project. Working for the NHS things have been interesting and challenging to say the least. So whilst at home (and unable to go out!) modelling has been a great stress relief. 
When I got back into modelling I discovered the North Devon line to Barnstaple and some fantastic photos of it in the 1980s. I started building a layout (South Tawton) based on Crediton. Unfortunately it was too big and ambitious and was plagued Ruth beginners errors I couldn’t iron out. And it was on the garage - too hot or cold. The final straw was dropping a bed head on it! It was left to rot then eventually the boards stripped down and saved for a future project. 


But the idea never went away and I always fancied a small layout based on the line. The eureka moment was seeing Lymebrook yard (sf315) and Trinity Road (nharding99) on here. These were small N gauge layouts with a track plan similar to Lapford. The main difference is a yard headshunt - which allows the yard to be shunted. independently of the loop. So during lockdown I’ve got the old board down and restored some of the buildings. The plan is a mix of several locations on the line - the freight from Lapford, the passing loop from Eggersford and the buildings from Crediton. Now ready for track laying I’ve been playing with off cuts of track and points to get the layout right. 
 

Here’s a few photos 

025FF79E-6C2E-4542-92DC-4D8948EA31AC.jpeg.aa05375bc290f7eea18cc72c905f181f.jpeg

The overall view with fiddle yard on the left and station on the right. Should be able to manage four coach trains - the platform will hold 3+loco which is about right 

7239A7C8-FCD1-44FB-B42B-F3FA9D18BB19.jpeg.ab87b11d918845f24f9b44bac0869c3d.jpeg

The station building and shelter is from Crediton. Canopies needed!

DD64CF39-DA7E-447E-A476-A769BBD16417.jpeg.f3b7bd1d6d696c760bd81c59a7df0640.jpeg

As is the signal box. These were rescued from the old layoutEF40859B-838C-48EA-84D3-6874801EDDD1.jpeg.391ff5423ed194dcbb7b02642aa2ca44.jpeg
Finally for now an old Kestrel farmhouse kit adapted into a thatched pub. 
 

I’ll put more photos up when there’s progress - next big job is track laying 

Edited by TomJ
  • Like 2
Link to post
Share on other sites

PS since starting this I’ve found another superb model of Lapford in N on here. Hope I’m not treading on any toes!!

  • Friendly/supportive 1
Link to post
Share on other sites
  • RMweb Gold

Nice to see another North Devon layout. Always liked the look of your buildings :)
We all seem to be nicking Eggesford's loop and Lapford's freight ;)

Is it time to resurrect R.A.N.D.O.M. - the Rmweb Association of North DevOn Modellers? :D

Link to post
Share on other sites

Thanks for the kind comments - buildings are my favourite part of the hobby. I’m a frustrated architect at heart!

 

i did wonder about whether to include a passing loop or not. I considered Lapford in its later state but I wanted to use my signal box - so by the 80s it had to be a passing place to justify the box. Then I considered modelling it in its earlier state with the down island platform beyond the bridge off scene. But I thought if I did that it might just look like I’d forgotten the platform. 
 

I reckon there’s enough North Devon layouts for at least a small show. I’m never exhibited but this one is small enough to fit easily in my car....

  • Like 1
Link to post
Share on other sites

Little bit of progress today. Made a start on the track laying. Track is a mix of code 55 in the scenic areas, with code 80 in the fiddle yard (using setrack for the curves. Managed to use second radius (10.5inch) in all areas, with nothing below 12inch on view. The newish curved points really help with these minimum space layouts. Hopefully it’ll run ok.....

 

Sadly I totally misread the packet on the cork and brought a 3ft length, not a 3m!! So need to get a couple more roles to get the fiddle yard complete. Then my least favourite part can start - wiring. At least it’s DCC and smallish! Part of the aim was to use up leftovers and not buy too much so for such a small layout I was thinking of using wire in tube for the points. But I’ve just found a load of Peco point motors so it’ll make sense to use those. Still deciding whether to control these from switches or the DCC handset 

 

Here’s where I’m up to. The main loops and platform lines are laid and will easily fit a 31/33 and 3 coaches, which is about right. The layout will fit 4 coach trains in the fiddle yard

 

4C8D41A3-BE95-48B1-960D-2597A5970644.jpeg.5ddcdf7aee70c91be2ffcd0a825facbd.jpeg

 

BD784B26-8ECD-4123-9413-E854F216B0B1.jpeg.5c25206286fbfd446f3b506c163ec5f7.jpeg

 

058697F0-C59C-4F3E-AE86-A9F0E0EF4B8C.jpeg.228ba8b89890476e649bbccdb5b0c781.jpeg

  • Like 2
Link to post
Share on other sites
  • 3 weeks later...

A strange sight today at South Tawton as two HST mk3 coaches were repeatedly pulled and pushed through the station


8C54DAB4-E411-4B2D-A214-BCB80A9A7C7F.jpeg.283b03160872ee91df16c351c383b4e5.jpeg

 

Turns out the engineers were conducting gauging trials on the new bridge. They’ve passed it (just) but banned any rail tours for fear of strange people sticking their heads out the window!
The bridge was actually rescued from the old layout - both sides were removed then rebuilt in a slew fashion with lots of trial and error to fit. Still need to put the arches in


Whilst they were there the team confirmed a loco + 3mk1 coaches would fit in the down platform (as per specifications) and checked the station building for clearance before platform construction

 

5945DB45-D470-4E74-8E96-ACEBE3252738.jpeg.a7ca2376fe537b89119485c7f31918df.jpeg


Electrics running. Next job to wire up point motors then I can start on the scenery 


 

  • Like 2
Link to post
Share on other sites
  • 2 weeks later...

Far to hot to think about any heavy engineering so I’ve been working on the platforms and buildings - based on Crediton. The waiting shelters were rescued from the old layout and the station was a rebuild

 

535BFA82-B429-4692-A823-B4ADC25EFEE6.jpeg.8bcb2a58a476693d6a8397777c2cfd83.jpeg

 

5E2129E9-3D8C-422C-91CF-96BE2EB5CD97.jpeg.3e61d0e80a5b7a977c60c5996f656281.jpeg
 

The aim of this project has been to use up left overs and scraps wherever possible. So the platforms are a mix of half used Metcalfe kits and Scalescenes printing with Ratio concrete fencing for that Southern feel. I need to stick the canopy on before the passengers complain about the liquid Devon sunshine!

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.