RMweb Premium Solo Posted July 24, 2020 RMweb Premium Share Posted July 24, 2020 Hi - may be a daft question but I picked up a couple of these 101s last year and have started to weather/detail them. They're one of my favourite models with superb detail and run really well, only thing is the brass strips (just above the bogies on this photo) are a little prominent - has anyone tried applying a little black paint to these and if so did it affect the running qualities? I've noticed the lights on the dummy can be a little flickery (on DCC with sound) though bending the little brass contacts on top of the bogies so they were a little more vertical seems to have helped. Many thanks Link to post Share on other sites More sharing options...
LNERJP Posted July 26, 2020 Share Posted July 26, 2020 Hi I have no experience of the model in question, but if you can remove the brass pick-ups and chemically blacken them this does not effect electrical conductivity. You want to use something like this if you have no experience of chemical blackening.https://www.eileensemporium.com/materials-for-modellers/category/blackening-fluids Cheers JP 1 Link to post Share on other sites More sharing options...
Dr Al Posted July 26, 2020 Share Posted July 26, 2020 Yes, You can simply paint the visible areas with a dark grey paint. Done it countless times on Farish and Dapol with this type of pickup system. cheers, Alan 1 Link to post Share on other sites More sharing options...
RMweb Premium Solo Posted July 27, 2020 Author RMweb Premium Share Posted July 27, 2020 13 hours ago, Dr Al said: Yes, You can simply paint the visible areas with a dark grey paint. Done it countless times on Farish and Dapol with this type of pickup system. cheers, Alan Ah, that's good to know, thanks Alan. Link to post Share on other sites More sharing options...
justin1985 Posted August 1, 2020 Share Posted August 1, 2020 Sharpie works well too! 1 Link to post Share on other sites More sharing options...
drduncan Posted October 31, 2020 Share Posted October 31, 2020 Some questions if I may... Ive been given a farish 101 dcc fitted apparently in regional railways livery. First, what are the two little switches in the underside of the power car for? Second, how do you get the body off???? Thanks for any advice! Duncan Link to post Share on other sites More sharing options...
RMweb Premium Steven B Posted November 1, 2020 RMweb Premium Share Posted November 1, 2020 There are three or four clips along each side of the body which is a very tight fit on the chassis. Using something blunt but thing (finger nail, plasticard etc) gently prise the body from the chassis. It may help to slide some plasticard between the body and the chassis to avoid the clips re-locating. On fitting I've normally filed down or removed one or more clips to make it easier to remove the body at a later date. I don't remember switches being fitted to the Farish 101. If it does then it will be to allow DC users to turn the lights off. Steven B. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now