pharrc20 Posted September 17, 2020 Share Posted September 17, 2020 8 hours ago, cactustrain said: Sorry about that omission from the parts list. The sheep and lambs are from Model Scene. I can't do this today because of my day job, but I'll try and fit it in this weekend. Thank you for the feedback. I will use this to improve future articles. No problemo I have a stack of these models hoping to do the same conversion so wanted to ensure I get the cutting right. Mine will be ex-Salt in aggregates use for my Speedlow layout along with some 'Baby Salt' PGAs and other PGA wagons known to have worked in the Buxton area late 80s early 90s. Thanks Paul Link to post Share on other sites More sharing options...
cactustrain Posted September 17, 2020 Share Posted September 17, 2020 PGA Cutting Guide You make two new wagons from three original wagons as follows: Cutting the bodies For two of the original bodies, cut as follows to give you 4 x part A For one other original body, cut as follows to give you 2 x part B: Each of the two new bodies is now made using Part A + Part B + Part A thus lengthening each wagon by 8mm and removing the central hopper divider. Cutting the chassis For two of the chassis, cut as follows: For one other chassis, cut out 4 x part E, discarding the other parts: Now make two chassis from the parts in the order: part C, part E, part D, part E, part C, thus lengthening the new chassis by 8mm. Good luck with making your PGAs. 2 1 1 Link to post Share on other sites More sharing options...
Penlan Posted September 17, 2020 Share Posted September 17, 2020 I'm reaching that conclusion too, Oh, the agony, doing something I don't like, subscription magazines (blame my parents) There were no BRM's on the shelf yesterday or today either according to my scouts. So I don't know were all these BRM readers are in the wild west.... Link to post Share on other sites More sharing options...
pharrc20 Posted September 17, 2020 Share Posted September 17, 2020 1 hour ago, cactustrain said: PGA Cutting Guide You make two new wagons from three original wagons as follows: Cutting the bodies For two of the original bodies, cut as follows to give you 4 x part A For one other original body, cut as follows to give you 2 x part B: Each of the two new bodies is now made using Part A + Part B + Part A thus lengthening each wagon by 8mm and removing the central hopper divider. Cutting the chassis For two of the chassis, cut as follows: For one other chassis, cut out 4 x part E, discarding the other parts: Now make two chassis from the parts in the order: part C, part E, part D, part E, part C, thus lengthening the new chassis by 8mm. Good luck with making your PGAs. Many thanks will add to the article tonight to read again. Thanks Paul Link to post Share on other sites More sharing options...
John Tanner Posted October 1, 2020 Share Posted October 1, 2020 Interesting comments re getting print copies of October 2020 BRM, tried 1 Smiths, 2 Tesco and 1 Sainsburys and none has had a copy. I used to subscribe, but when the shop copies had gifts, but the subscribers were given DVDs I cancelled my subscription, I didn't need two copies. Link to post Share on other sites More sharing options...
Moderators Howard Smith Posted October 2, 2020 Author Moderators Share Posted October 2, 2020 8 hours ago, John Tanner said: Interesting comments re getting print copies of October 2020 BRM, tried 1 Smiths, 2 Tesco and 1 Sainsburys and none has had a copy. There's always the subscription option again... we've a few gifts for new subscribers at the moment... https://www.rmweb.co.uk/community/index.php?/topic/158545-november-2020-brm/&do=findComment&comment=4137183 or, drop our helpful subscription team a line on 01778 392 002 and they can sort you out H Link to post Share on other sites More sharing options...
pharrc20 Posted October 20, 2020 Share Posted October 20, 2020 On 17/09/2020 at 17:07, cactustrain said: PGA Cutting Guide You make two new wagons from three original wagons as follows: Cutting the bodies For two of the original bodies, cut as follows to give you 4 x part A For one other original body, cut as follows to give you 2 x part B: Each of the two new bodies is now made using Part A + Part B + Part A thus lengthening each wagon by 8mm and removing the central hopper divider. Cutting the chassis For two of the chassis, cut as follows: For one other chassis, cut out 4 x part E, discarding the other parts: Now make two chassis from the parts in the order: part C, part E, part D, part E, part C, thus lengthening the new chassis by 8mm. Good luck with making your PGAs. Thanks for the second part of the article in the November issue. I can tell you one thing regarding the BULK SALT lettering the actual font is Grotesque No. 9, this was confirmed to me by one of the model transfer producers some years ago. I had some numbersets made up for the Procor PSA open mineral wagons that were numbered in the PR 255xx range that had the same style of lettering as on the Salt PGAs. I have six donor Lima PGAs now ready to make a start on cutting though will need to adapt or find a deeper mitre block to cut the bodyshells up. Cheers Paul 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now