RMweb Premium PMP99 Posted February 20, 2021 Author RMweb Premium Share Posted February 20, 2021 (edited) Loading platforms added to each side of the shed. Due to my limited space, these have been reduced in width from the kit dimensions, particularly on the track side. Edited April 2, 2022 by PMP99 7 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted February 22, 2021 Author RMweb Premium Share Posted February 22, 2021 (edited) A bit more progress with the goods shed. Barge boards added, the kit says just stick them straight onto the wall, however I have spaced them out slightly. I have also made up some internal beams from lime wood strips, and stained with a dilute light oak wood stain. The beams that go up to the apex at each end will be attached to the roof to locate it, and make it removable. Edited April 2, 2022 by PMP99 12 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted February 26, 2021 Author RMweb Premium Share Posted February 26, 2021 (edited) A crane has been added to the goods shed interior. It is a Skytrex kit, although I have added the chain to it. Edited April 2, 2022 by PMP99 10 Link to post Share on other sites More sharing options...
Piemanlarger Posted February 26, 2021 Share Posted February 26, 2021 20 minutes ago, PMP99 said: A crane has been added to the goods shed interior. It is a Skytrex kit, although I have added the chain to it. Should it not be onthe outside to lift heavy goods out of open wagons? Im no expert on how they were used but inside it seems of limited use? 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Siberian Snooper Posted February 26, 2021 RMweb Premium Share Posted February 26, 2021 15 minutes ago, Piemanlarger said: Should it not be onthe outside to lift heavy goods out of open wagons? Im no expert on how they were used but inside it seems of limited use? That's an inside style crane. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted February 26, 2021 Author RMweb Premium Share Posted February 26, 2021 47 minutes ago, Piemanlarger said: Should it not be onthe outside to lift heavy goods out of open wagons? Im no expert on how they were used but inside it seems of limited use? As Siberian Snooper says it is an internal crane. I think these were more generally used where the track went inside the shed. Where it is located it can swing out over the track/wagons, but is principally there to add interest to the interior. I did consider an external crane but didn’t want to fill up my yard too much. 1 Link to post Share on other sites More sharing options...
Piemanlarger Posted February 26, 2021 Share Posted February 26, 2021 Ah ok. I though the wall was in the way stopping it swing out to a wagon. Hence better to put it outside. I did consider one on my loading dock but also came to the conclusion it would look too cluttered. Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted February 26, 2021 Author RMweb Premium Share Posted February 26, 2021 2 minutes ago, Piemanlarger said: Ah ok. I though the wall was in the way stopping it swing out to a wagon. Hence better to put it outside. I did consider one on my loading dock but also came to the conclusion it would look too cluttered. You are partly right as the wall stops it rotating to being fully 90 degrees to the track. The total travel would be about 135 degrees I suppose, although it is actually now permanently fixed in the position shown. I’m sure it’s not at all prototypical, but as I said earlier it just for effect really. 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted February 27, 2021 Author RMweb Premium Share Posted February 27, 2021 (edited) Limited progress today, but I have added a pendant led light to the goods shed roof beam. Edited April 2, 2022 by PMP99 11 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted March 2, 2021 Author RMweb Premium Share Posted March 2, 2021 (edited) The doors and runners supplied with the LCUT kit are very flimsy card, and unfortunately not very realistic. I have therefore made up some new doors out of lime wood strip. The runners are made from plastic strip, and the rollers/hangers are from brass nuts, bolts and strip. Hopefully get these fitted tomorrow. Edited April 2, 2022 by PMP99 7 1 Link to post Share on other sites More sharing options...
Piemanlarger Posted March 3, 2021 Share Posted March 3, 2021 They look great. Nice work. 1 1 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted March 3, 2021 Author RMweb Premium Share Posted March 3, 2021 (edited) First set of doors fitted after a bit of weathering. Edited April 2, 2022 by PMP99 10 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted March 4, 2021 Author RMweb Premium Share Posted March 4, 2021 (edited) Doors on both sides now, and canopies added. ‘Road side’ is just a narrow cover over the door runner. Next stage is the guttering and down pipes. Edited April 2, 2022 by PMP99 9 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted March 9, 2021 Author RMweb Premium Share Posted March 9, 2021 (edited) As the goods shed building is nearing completion I have prepared some ‘goods’ to go inside. Edited April 2, 2022 by PMP99 12 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted March 10, 2021 Author RMweb Premium Share Posted March 10, 2021 (edited) The goods shed is basically finished now that the roof is on, and the gutters and drainpipes are fitted. It probably needs a crane operator inside at some point, plus other details adding. Edited April 2, 2022 by PMP99 12 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted March 10, 2021 Author RMweb Premium Share Posted March 10, 2021 (edited) Another shot with a loco posed alongside for effect Edited April 2, 2022 by PMP99 9 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted March 10, 2021 Author RMweb Premium Share Posted March 10, 2021 (edited) The Dapol wagon has now been weathered, although the inside has only received a general ‘toning down’ so far. More will be done when I think about it’s load. This represents the total freight stock at present, although I have a Peco vent van to build which may be the next task. Edited April 2, 2022 by PMP99 10 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted March 30, 2021 Author RMweb Premium Share Posted March 30, 2021 (edited) The Peco van has joined the fleet now. Edited April 2, 2022 by PMP99 8 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted April 4, 2021 Author RMweb Premium Share Posted April 4, 2021 (edited) Another van on the workbench. This will be a fish van. The brown is a bit glossy at the moment so will need some matt varnish in due course. Edited April 2, 2022 by PMP99 7 Link to post Share on other sites More sharing options...
RMweb Gold Brinkly Posted April 4, 2021 RMweb Gold Share Posted April 4, 2021 Hello Graham, I really shouldn't look at GWR and former GWR 7mm layouts! Very inspirational work: I look forward to watching Liscombe grow. Some excellent modelling so far. All the best, Nick. 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted April 4, 2021 Author RMweb Premium Share Posted April 4, 2021 1 hour ago, Brinkly said: Hello Graham, I really shouldn't look at GWR and former GWR 7mm layouts! Very inspirational work: I look forward to watching Liscombe grow. Some excellent modelling so far. All the best, Nick. Thanks for the kind words Nick. I don’t think my modelling is quite in the same league as some on here, but I enjoy trying! Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted April 16, 2021 Author RMweb Premium Share Posted April 16, 2021 (edited) Progress has been a bit slow for the last couple of weeks, however the Fish van is now completed. Edited April 2, 2022 by PMP99 10 Link to post Share on other sites More sharing options...
37114 Posted April 17, 2021 Share Posted April 17, 2021 This is looking great Graham, the goods shed has turned out well. The LCUT kits are great but definitely need the extra detail you have added here. 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted April 17, 2021 Author RMweb Premium Share Posted April 17, 2021 5 hours ago, 37114 said: This is looking great Graham, the goods shed has turned out well. The LCUT kits are great but definitely need the extra detail you have added here. Thanks, I'm quite pleased with it. Yes, the LCUT kits provide a good fairly cheap starting point, which suits my budget, but as you say it's worth trying to improve them a bit. I've just started on a small LCUT signal box, and will post some pictures as it progresses. 2 Link to post Share on other sites More sharing options...
RMweb Premium PMP99 Posted April 18, 2021 Author RMweb Premium Share Posted April 18, 2021 (edited) A start on the LCUT signal box being done in similar style to the goods shed. Edited April 2, 2022 by PMP99 8 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now