woodenhead Posted November 9, 2020 Share Posted November 9, 2020 2 hours ago, jonnyuk said: not sure it's been answered (read through this thread and can't see it). The BWT does it have the coreless motor still? does it still have the really visible seem down the boiler and does it have the plastic rodding still? It's lovely looking engine but those 3 things let is down, especially at the price point. I've two of these from the second batch (i.e. DJM not Dapol) and they both run lovely, in fact my favourite locos in OO. Visually I cannot say I've ever noticed the seam (if it is that obvious) and the plastic rodding shouldn't be an issue. 1 Link to post Share on other sites More sharing options...
Yankee Posted November 11, 2020 Share Posted November 11, 2020 Managed a click and collect today. What a pair, cant see these hanging around long. To answer my earlier question about the axle length of the Gate Stock, although the Olive Green set wasn't in today, measuring a BR red set showed them at approx. 24.5mm, 9 Link to post Share on other sites More sharing options...
Markn Posted November 13, 2020 Share Posted November 13, 2020 For anyone who's got one of the new release Wells tanks, how are they? Itching to get one now. Link to post Share on other sites More sharing options...
Yankee Posted November 13, 2020 Share Posted November 13, 2020 From the two I have received, see my pervious post, and the two my colleague picked up at the same time they have be very well produced. Comparing them to my Kernow version there seems to be no tooling changes, just livery changes, but what nice changes they are. Unlike the Gate stock, that is packaged exactly like Kernow’s, the Well Tanks are completely different. Much larger box and very well protected. Very nice to get a new model with everything attached, everything aligned, not bent and no marks. Of course this is subjective and probably biased, but if you are thinking about one of these or the Gate Stock I wouldn’t leave it too long, the retailer who we purchased these from said Bachmann were already sold out to retailers orders. 4 3 Link to post Share on other sites More sharing options...
Edge Posted November 13, 2020 Share Posted November 13, 2020 Just purchased the SR lined black example. Will look good alongside a W1 and a Stirling single 1 Link to post Share on other sites More sharing options...
RMweb Gold Oldddudders Posted November 13, 2020 RMweb Gold Share Posted November 13, 2020 2 minutes ago, Edge said: Just purchased the SR lined black example. Will look good alongside a W1 and a Stirling single An outlook guaranteed to bring a smile to any retailer's face. None of this fussy 'were they ever seen together?' stuff! 2 2 4 Link to post Share on other sites More sharing options...
woodenhead Posted November 13, 2020 Share Posted November 13, 2020 43 minutes ago, Edge said: Just purchased the SR lined black example. Will look good alongside a W1 and a Stirling single 39 minutes ago, Oldddudders said: An outlook guaranteed to bring a smile to any retailer's face. None of this fussy 'were they ever seen together?' stuff! You've said it now, he'll have to sell the Stirling Single. 2 Link to post Share on other sites More sharing options...
Edge Posted November 13, 2020 Share Posted November 13, 2020 (edited) The joys of planning a model railway based in preservation . I’m hoping for it to be an exhibition layout and I can’t wait for vocal rivet counters to tell me all for the problems with it it’s also got a grey 1361, a LBSCR Atlantic, a regional railways 37, a Bulleid pacific with Stanier tender and a LNER green ‘A4’. Thinking about it, if this gets out into the exhibitions it may be detrimental to the health of the vocal rivet counter brigade... Edited November 13, 2020 by Edge 4 1 2 Link to post Share on other sites More sharing options...
tender Posted November 13, 2020 Share Posted November 13, 2020 Having a selection of BWT's from the first two batches i'm quite tempted by the Southern 'as Preserved' green livery. However, did the BWT ever carry this livery or is it just a 20th century preservation thing? If it did, what coaching stock would it have been coupled with? I don't see the Gate stock (which i have several sets) as being suitable as the BWT doesn't appear to have the P-P gear. But i'm no expert, maybe someone here can elaborate. Link to post Share on other sites More sharing options...
Edge Posted November 13, 2020 Share Posted November 13, 2020 (edited) 52 minutes ago, tender said: Having a selection of BWT's from the first two batches i'm quite tempted by the Southern 'as Preserved' green livery. However, did the BWT ever carry this livery or is it just a 20th century preservation thing? If it did, what coaching stock would it have been coupled with? I don't see the Gate stock (which i have several sets) as being suitable as the BWT doesn't appear to have the P-P gear. But i'm no expert, maybe someone here can elaborate. I can pretty categorically say that the loco never carried that livery in service to SR or BR (to my mind it’s unlikely similar to this was carried under the LSWR either, but my knowledge of that railway is limited so I’m not too sure). I’ve been unable to track down the details of the loco in this livery myself, but I’d imagine that it was an early preservation livery myself. Edited November 13, 2020 by Edge 1 Link to post Share on other sites More sharing options...
RMweb Gold jonnyuk Posted November 13, 2020 RMweb Gold Share Posted November 13, 2020 did this loco ever pull the gatestock coaches? i can't find anything to say it did so i assume not. Link to post Share on other sites More sharing options...
Yankee Posted November 13, 2020 Share Posted November 13, 2020 The video of my Well Tank with the Gate Stock was purely to show what EFE were releasing, not to indicate in anyway what happened in real life. The Gate Stock in the video is the original Kernow version set 374, EFE’s will be set 373 due next week. The Well Tank Green version represents how the engine appeared as a static exhibit in the Museum at Buckfastleigh around 1997 https://sremg.org.uk/steam/0298_04.html 1 1 Link to post Share on other sites More sharing options...
woodenhead Posted November 13, 2020 Share Posted November 13, 2020 1 hour ago, Edge said: I can pretty categorically say that the loco never carried that livery in service to SR or BR (to my mind it’s unlikely similar to this was carried under the LSWR either, but my knowledge of that railway is limited so I’m not too sure). I’ve been unable to track down the details of the loco in this livery myself, but I’d imagine that it was an early preservation livery myself. Even if it did carry the livery the loco is wrong for the livery in anything other than preserved form - it was rebuilt, at the very least the chimney is the wrong one for LSWR. 1 Link to post Share on other sites More sharing options...
tender Posted November 13, 2020 Share Posted November 13, 2020 1 hour ago, Edge said: I can pretty categorically say that the loco never carried that livery in service to SR or BR (to my mind it’s unlikely similar to this was carried under the LSWR either, but my knowledge of that railway is limited so I’m not too sure). I’ve been unable to track down the details of the loco in this livery myself, but I’d imagine that it was an early preservation livery myself. 7 minutes ago, Yankee said: The Well Tank Green version represents how the engine appeared as a static exhibit in the Museum at Buckfastleigh around 1997 https://sremg.org.uk/steam/0298_04.html Ah well, that's saved me £100+ Link to post Share on other sites More sharing options...
RMweb Gold Graham_Muz Posted November 13, 2020 RMweb Gold Share Posted November 13, 2020 No. 3298 is in the Southern lined green livery as preserved at Buckfastleigh between April 1978 and December 2001. The Well tanks would not have run with the Gate stock (other than under rule 1) 1 3 Link to post Share on other sites More sharing options...
Yankee Posted November 13, 2020 Share Posted November 13, 2020 (edited) 52 minutes ago, tender said: Ah well, that's saved me £100+ You probably wouldn't say that if you had it in your hand. When I went to collect mine with my colleague he had only ordered the Green Lined version and no intention of buying the Green, but a soon as I opened the box with my Green one in he said I've got to have one of those and he's usually a sticker for accuracy https://cpineroad.blogspot.com/ . We all succumb to rule 1 at some time in our modeling life. Wouldn't be surprised to see one pop up on Canute Road or make its way towards Salisbury. ? Edited November 13, 2020 by Yankee 1 Link to post Share on other sites More sharing options...
RMweb Premium Mike_Walker Posted November 13, 2020 RMweb Premium Share Posted November 13, 2020 There's a photo in C F D Whetmath's Bodmin & Wadebridge Railway book of 30585 at Bodmin General on 13 July 1962 with a single Bulleid coach in tow. The caption says it was possibly the last time it worked an ordinary passenger train. Can't tell from the picture whether it's a short or long Bulleid and what type it is. Link to post Share on other sites More sharing options...
phil gollin Posted November 13, 2020 Share Posted November 13, 2020 . Do any of the Kernow, or now EFE, Gate Stock releases represent the LSWR livery carried when introduced ? . Link to post Share on other sites More sharing options...
Butler Henderson Posted November 13, 2020 Share Posted November 13, 2020 7 minutes ago, phil gollin said: .Do any of the Kernow, or now EFE, Gate Stock releases represent the LSWR livery carried when introduced ? No - http://www.kernowmodelrailcentre.com/pg/117/LSWR_Gate_Stock 1 Link to post Share on other sites More sharing options...
Yankee Posted November 13, 2020 Share Posted November 13, 2020 Up until Grouping they would have looked like this. The driving ends didn't get modified like the Kernow models until about 1929. These coaches started life as Kernow models and were converted by a club member so could be done if you really wanted one. 11 3 Link to post Share on other sites More sharing options...
Edge Posted November 13, 2020 Share Posted November 13, 2020 (edited) 3 hours ago, Yankee said: You probably wouldn't say that if you had it in your hand. When I went to collect mine with my colleague he had only ordered the Green Lined version and no intention of buying the Green, but a soon as I opened the box with my Green one in he said I've got to have one of those and he's usually a sticker for accuracy https://cpineroad.blogspot.com/ . We all succumb to rule 1 at some time in our modeling life. Wouldn't be surprised to see one pop up on Canute Road or make its way towards Salisbury. ? agreed, the full green liveried one looks damn good. I can only afford one of them though and even I would notice two locos of the same class and with the same number running together. And have vague plans for a future SR layout, so went for the one in what could have been a prototypical livery. EDIT: Upo0n reflection, i had also noiced that in some of the shots of the loco i saw on the Kerow website, the green driving wheels looked a little too "plastic" for my liking. Doesnt look like thats something that actualy seems too evident in real life though. Edited November 13, 2020 by Edge Link to post Share on other sites More sharing options...
leeadavo Posted November 14, 2020 Share Posted November 14, 2020 What a lovely model. Some pictures along one of the DJ Models batch and comparison of box sizes. Link to post Share on other sites More sharing options...
leeadavo Posted November 15, 2020 Share Posted November 15, 2020 My first attempt at a review video: 2 Link to post Share on other sites More sharing options...
RMweb Gold jonnyuk Posted November 15, 2020 RMweb Gold Share Posted November 15, 2020 (edited) i took a trip to Tony's trains in saturday having said i'd be picking up the SR black, i made the mistake of asking to look a the preserved green, i think took about 20 minutes trying to decide to before invoking rule one and walked away with preserved green. its a stunning little loco, as Tony said, its eye candy! it does have the seem line across the top of boiler but i can live with that (did it have this in real life)? i'm just adding the detail back, fitted some nice 3 link couplings to the front i got from accurascale. took some pics, i'll post them up in due course Edited November 15, 2020 by jonnyuk Link to post Share on other sites More sharing options...
90rob Posted November 15, 2020 Share Posted November 15, 2020 1 hour ago, leeadavo said: My first attempt at a review video: Yes, I enjoyed this review video - interesting variety of scenes, nice views of the loco running on a 'real' model railway, pleasant commentary, not boring, not opinionated. Good first review - more of the same I hope. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now