MrWolf Posted October 23, 2021 Author Share Posted October 23, 2021 As if I don't already spend most of my time with a nut who keeps quoting Monty python, you lot have to join in.... 1 2 2 Link to post Share on other sites More sharing options...
RMweb Gold Graham T Posted October 23, 2021 RMweb Gold Share Posted October 23, 2021 Bet you didn't expect that? 6 Link to post Share on other sites More sharing options...
MrWolf Posted October 23, 2021 Author Share Posted October 23, 2021 (edited) I've been busy with the thrilling task of filing the square pegs on the bottom of the cattle dock fence posts into round ones. But that's not a very interesting picture. The 8 ton van is coming together okay though. Edited August 23, 2022 by MrWolf Replaced picture 8 2 Link to post Share on other sites More sharing options...
MrWolf Posted October 23, 2021 Author Share Posted October 23, 2021 6 minutes ago, Graham T said: Bet you didn't expect that? Oh, not even for a minute! 1 Link to post Share on other sites More sharing options...
RMweb Gold JustinDean Posted October 23, 2021 RMweb Gold Share Posted October 23, 2021 26 minutes ago, MrWolf said: I've been busy with the thrilling task of filing the square pegs on the bottom of the cattle dock fence posts into round ones. But that's not a very interesting picture. The 8 ton van is coming together okay though. Looks great mate! Good to know you didn’t get stabbed in the night also. Jay 1 2 1 Link to post Share on other sites More sharing options...
MrWolf Posted October 23, 2021 Author Share Posted October 23, 2021 Thanks, on both counts. There's a lot of good natured ribbing goes on in this house, some people think it's a bit strange. Then again, model railway fans are thought of as strange too. 3 1 1 Link to post Share on other sites More sharing options...
MrWolf Posted October 23, 2021 Author Share Posted October 23, 2021 (edited) I have been tinkering with the grass in the sheep field. A tiny bit of Woodland Scenics blended turf and odd blobs of PVA , covered in 1mm spring fibres and 4mm meadow fibres. I hope it shows up in the photos. Edited August 23, 2022 by MrWolf Replaced picture 13 1 Link to post Share on other sites More sharing options...
MrWolf Posted October 23, 2021 Author Share Posted October 23, 2021 I'm going to be adding heavier amounts of blended turf and longer grasses elsewhere. In the meantime, I have a cattle dock and point rodding to be getting on with. 6 Link to post Share on other sites More sharing options...
RMweb Gold Graham T Posted October 23, 2021 RMweb Gold Share Posted October 23, 2021 3 minutes ago, MrWolf said: I'm going to be adding heavier amounts of blended turf and longer grasses elsewhere. In the meantime, I have a cattle dock and point rodding to be getting on with. Well those will keep you out of trouble for a while! 3 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 24, 2021 RMweb Premium Share Posted October 24, 2021 17 hours ago, MrWolf said: I've been busy with the thrilling task of filing the square pegs on the bottom of the cattle dock fence posts into round ones. I don't remember having to do that on mine. 1 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted October 24, 2021 RMweb Gold Share Posted October 24, 2021 17 hours ago, MrWolf said: I have been tinkering with the grass in the sheep field. A tiny bit of Woodland Scenics blended turf and odd blobs of PVA , covered in 1mm spring fibres and 4mm meadow fibres. I hope it shows up in the photos. Looks good enough to eat. 2 8 Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted October 24, 2021 RMweb Gold Share Posted October 24, 2021 18 hours ago, MrWolf said: I have been tinkering with the grass in the sheep field. A tiny bit of Woodland Scenics blended turf and odd blobs of PVA , covered in 1mm spring fibres and 4mm meadow fibres. I hope it shows up in the photos. Very nice indeed Rob, looks excellent. Al. 1 1 1 Link to post Share on other sites More sharing options...
DonB Posted October 24, 2021 Share Posted October 24, 2021 Probably not useful information as an addition to the detail of your sheep field, but Aston on Clun is the only place where I have seen an Adder .... scared me somewhat as it slithered under a field gate just as I was about to open it. 3 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted October 24, 2021 RMweb Premium Share Posted October 24, 2021 On 23/10/2021 at 12:36, MrWolf said: The 8 ton van is coming together okay though. Please check that the bottom of the headstocks are aligned with the bottom of the solebars. 7 hours ago, DonB said: an addition [...] an Adder Ho, ho! 3 Link to post Share on other sites More sharing options...
MrWolf Posted October 24, 2021 Author Share Posted October 24, 2021 12 minutes ago, Compound2632 said: Please check that the bottom of the headstocks are aligned with the bottom of the solebars. No, it's about 15 thou out. It's fitted flush with the floor, so that's clearly a design fault with the kit itself. Might have known it, it all went together neatly. There's no simple way to thin the solebars accurately before assembly, unless you know of one? 1 Link to post Share on other sites More sharing options...
MrWolf Posted October 24, 2021 Author Share Posted October 24, 2021 8 hours ago, DonB said: Probably not useful information as an addition to the detail of your sheep field, but Aston on Clun is the only place where I have seen an Adder .... scared me somewhat as it slithered under a field gate just as I was about to open it. Oddly enough, I've only ever seen one Adder, it was a disappointing 12-18 inches long for a potentially deadly snake, but it was still a bit closer than I would have liked. I had stopped my bike near the former LNWR halt at Grace Dieu Priory in Leicestershire and sat down against a drystone wall. The little bu66er came out of the wall, looked up at me and disappeared into the bracken. I decided to finish my cigarette break sitting on the bike instead. 1 3 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted October 24, 2021 RMweb Premium Share Posted October 24, 2021 Just now, MrWolf said: No, it's about 15 thou out. It's fitted flush with the floor, so that's clearly a design fault with the kit itself. Might have known it, it all went together neatly. There's no simple way to thin the solebars accurately before assembly, unless you know of one? It is indeed a design fault. My solution here (a coke wagon but the problem and solution are the same): 1 1 1 Link to post Share on other sites More sharing options...
MrWolf Posted October 24, 2021 Author Share Posted October 24, 2021 Thanks for that, I'll modify the ten tonner by raising the floor locating groove in the van ends with a razor saw. On this one I can fake it by trimming the ends of the solebars. No option really! The ten tonner also has no reference to in the instructions that came with it, so I have no idea on running numbers. Both kits come with methfix transfers, having read the instructions, would seem to be more trouble than they're worth. Locating them accurately on the model seems a bit hit and miss too. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted October 24, 2021 RMweb Premium Share Posted October 24, 2021 (edited) 7 minutes ago, MrWolf said: Thanks for that, I'll modify the ten tonner by raising the floor locating groove in the van ends with a razor saw. On this one I can fake it by trimming the ends of the solebars. No option really! The ten tonner also has no reference to in the instructions that came with it, so I have no idea on running numbers. Both kits come with methfix transfers, having read the instructions, would seem to be more trouble than they're worth. Locating them accurately on the model seems a bit hit and miss too. The 10 ton van is longer - 16'6" - and so has different mouldings and does not have this problem. Actually that kit can represent either diagram D362, 8 tons, or D363, 10 tons - visually identical. There are some numbers in Essery, Midland Wagons: D362: 4197, 57471, 8780, 8940, 7325, 90437, 90766 D363: 31319, 32504, 47961 Either: 3906, 22700, 23318, 68283, 4166, 92587. They must be pretty ancient kits to have Methfix transfers. The first ones I built, in the 1980s, had Pressfix. Since being reintroduced a couple of years ago, they have waterslide. Edited October 24, 2021 by Compound2632 1 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted October 24, 2021 RMweb Premium Share Posted October 24, 2021 50 minutes ago, MrWolf said: Both kits come with methfix transfers, having read the instructions, would seem to be more trouble than they're worth. Persevere. Methfix transfers are, IMHO, the best. Make sure you dilute the meths as per the instructions before you use it. 2 2 Link to post Share on other sites More sharing options...
MrWolf Posted October 24, 2021 Author Share Posted October 24, 2021 7 minutes ago, St Enodoc said: Persevere. Methfix transfers are, IMHO, the best. Make sure you dilute the meths as per the instructions before you use it. Thanks, I'll give it a go, I've got plenty of meths around from furniture renovation. 1 Link to post Share on other sites More sharing options...
MrWolf Posted October 24, 2021 Author Share Posted October 24, 2021 53 minutes ago, Compound2632 said: The 10 ton van is longer - 16'6" - and so has different mouldings and does not have this problem. Actually that kit can represent either diagram D362, 8 tons, or D363, 10 tons - visually identical. There are some numbers in Essery, Midland Wagons: D362: 4197, 57471, 8780, 8940, 7325, 90437, 90766 D363: 31319, 32504, 47961 Either: 3906, 22700, 23318, 68283, 4166, 92587. They must be pretty ancient kits to have Methfix transfers. The first ones I built, in the 1980s, had Pressfix. Since being reintroduced a couple of years ago, they have waterslide. Thanks, that's very helpful. The kits are old, one box has a price tag of £1.50, over the top of another. They were a pre covid eBay buy. Lately I only buy obsolete kits secondhand. If you buy for instance, a yellow box or earlier Ratio kit used, you might be saving £2, (And I've even seen bidding surpass new price!) but the plastic may have gone like glass, the transfers will be about kn@ckered and it will have the old wheels on a sprue, which were never much good. You're better off buying a current offering I find. 2 3 2 Link to post Share on other sites More sharing options...
Nick Gough Posted October 25, 2021 Share Posted October 25, 2021 20 hours ago, MrWolf said: Oddly enough, I've only ever seen one Adder, it was a disappointing 12-18 inches long for a potentially deadly snake, but it was still a bit closer than I would have liked. I had stopped my bike near the former LNWR halt at Grace Dieu Priory in Leicestershire and sat down against a drystone wall. The little bu66er came out of the wall, looked up at me and disappeared into the bracken. I decided to finish my cigarette break sitting on the bike instead. I met my first wild adder in June this year: In Thetford forest - Something moved off the path just in front of my foot: Fortunately the dog didn't get there first! 2 1 2 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted October 25, 2021 RMweb Gold Share Posted October 25, 2021 (edited) I’ve seen four Adders! This was the first one Edited October 25, 2021 by chuffinghell 1 1 1 3 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted October 25, 2021 RMweb Gold Share Posted October 25, 2021 Followed by this one Then this one And finally this one 1 1 10 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now