Paul_in_Ricky Posted November 23, 2020 Share Posted November 23, 2020 I've used masking liquid to mask areas of a model before spraying. Now I'm having great difficulty in getting it off, especially the areas sprayed over with enamel, any good tips for getting it off ? I'd prefer not to just rub with my finger, even though it seems the best way of getting it off, as some primed masked areas are still to be painted. I used an artists masking liquid that specifically says it's good for airbrush work; Schmincke Rubbelkrepp Link to post Share on other sites More sharing options...
LongRail Posted November 23, 2020 Share Posted November 23, 2020 Use the end of a cocktail stick to pick from the middle 2 Link to post Share on other sites More sharing options...
Paul_in_Ricky Posted November 23, 2020 Author Share Posted November 23, 2020 Thanks, I've just tried that. I think my main problem is not having put it on thickly enough, so it doesn't pull off as a thick skin, it just breaks up, especially where the over spray has thickened it. A stiff dry stencil brush is helping, but this is looking like a very long tedious job now :-( Link to post Share on other sites More sharing options...
Paul_in_Ricky Posted November 24, 2020 Author Share Posted November 24, 2020 I've now spent hours trying to clean this masking product off and it's been a complete disaster. Small bits stuck in corners, marks on paintwork trying to get it off. IPA softens it a lot, but takes off the underlying paint/primer. Just terrible. Not sure if I can rescue anything or will have strip everything off and start from scratch again. Days of lost work....never again :-( Link to post Share on other sites More sharing options...
RMweb Premium ColinK Posted November 24, 2020 RMweb Premium Share Posted November 24, 2020 I don’t know if it will work, but have you tried putting another coat of maskol on top to make it thicker? Link to post Share on other sites More sharing options...
Paul_in_Ricky Posted November 24, 2020 Author Share Posted November 24, 2020 Thanks Colin, Yes I did try that, but it wasn't much help. I think it's one of those products that works fine in a very limited set of circumstances. It was fine on absolutely flat polished metal surfaces, but on detail like rivets, in corners or possibly just the matt primer it just sticks like glue. Link to post Share on other sites More sharing options...
RMweb Premium ColinK Posted November 24, 2020 RMweb Premium Share Posted November 24, 2020 The recent O Gauge Guild virtual exhibition (free and open to anyone) included a 30 minute presentation on preparing models for painting. Even though it was mainly about brass locos in 7mm (not what I model) I found it very interesting and helpful. One of the tips on there was (I hope I’ve remembered correctly) to use Copydex for masking. It’s probably still on the O Gauge Guild website. Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted November 24, 2020 RMweb Gold Share Posted November 24, 2020 How long did you leave it in place the first time? It seems to come off quite easily if you use a fairly thick layer but remove it after about 24 hours. I used to use it a lot when weathering, especially to mask glazing, and found that after 24 hours it gets progressively more difficult to remove cleanly. Once it reaches that stage it needs cocktail sticks and a pair of tweezers to get right into the corners and fine detail. 1 Link to post Share on other sites More sharing options...
Paddy Posted November 24, 2020 Share Posted November 24, 2020 I have tried Humbrol Maskol twice (I model in N Gauge) and both times it has been a disaster. After the first time, I even bought a new bottle in case that was the issue. Maybe the formulation has changed? I will not be using Maskol or recommending it again. Kind regards Paddy Link to post Share on other sites More sharing options...
Paul_in_Ricky Posted November 25, 2020 Author Share Posted November 25, 2020 12 hours ago, Mick Bonwick said: How long did you leave it in place the first time? It seems to come off quite easily if you use a fairly thick layer but remove it after about 24 hours. I'm masking enamels that need two coats and a 24hrs to dry, it's going to be a minimum of two days at the very least. Thick coats of this masking liquid take at least 6 hours to start getting solid enough to take off too. It's a "just say no" product for me now. 1 Link to post Share on other sites More sharing options...
michl080 Posted November 25, 2020 Share Posted November 25, 2020 I have been trying different brands and found the Vallejo type 70.523 best. I doesn't have this ugly ammonia smell. I noted that these products seems to age quickly, you may have had an old bottle. Michael Link to post Share on other sites More sharing options...
Paul_in_Ricky Posted November 25, 2020 Author Share Posted November 25, 2020 No, the bottle was only bought a month ago. I just don't think this particular brand works well for our purposes, maybe the Vallejo is better, maybe worth a punt next time. Link to post Share on other sites More sharing options...
michl080 Posted November 26, 2020 Share Posted November 26, 2020 19 hours ago, Paul_in_Ricky said: No, the bottle was only bought a month ago. It may have been sitting on the shelf for years.... This is something I would order at a large online shop, because you can expect a larger throughput. Michael Link to post Share on other sites More sharing options...
RMweb Premium Torper Posted November 30, 2020 RMweb Premium Share Posted November 30, 2020 Some time ago I used Humbrol Maskol without any problems - it peeled off perpex windows quite happily and without much mess or residue. It was an old bottle that smelled strongly of ammonia and I think I thinned it a bit with water before using it. I would also have peeled it off well within the 3-day limit suggested by Humbrol having sealed in little strips of paper to help with the peeling process. DT Link to post Share on other sites More sharing options...
rob D2 Posted December 1, 2020 Share Posted December 1, 2020 No problems with maskol, used it a lot to hide windows when spraying varnish. applied using a lump at end of a cocktail stick, then spread out to get in corners. comes off with tweezers, only tricky but being round windscreen wipers . Link to post Share on other sites More sharing options...
Ian Rathbone Posted December 4, 2020 Share Posted December 4, 2020 It was my demo on the 0 Gauge virtual exhibition re preparing models for painting. Forget Maskol and similar products. Go to your local hardware shop and get Copydex in a small tube, it will last 3 weeks on the model before degrading, it creates good boundaries and is not affected by the thinners in enamel, acrylic or cellulose paints. Apply with a cocktail stick or worn out brush. Ian R 1 Link to post Share on other sites More sharing options...
rob D2 Posted December 4, 2020 Share Posted December 4, 2020 25 minutes ago, Ian Rathbone said: It was my demo on the 0 Gauge virtual exhibition re preparing models for painting. Forget Maskol and similar products. Go to your local hardware shop and get Copydex in a small tube, it will last 3 weeks on the model before degrading, it creates good boundaries and is not affected by the thinners in enamel, acrylic or cellulose paints. Apply with a cocktail stick or worn out brush. Ian R I always find copydex isn’t cheap, and maskol is such a lovely purple colour Link to post Share on other sites More sharing options...
Paul_in_Ricky Posted December 4, 2020 Author Share Posted December 4, 2020 Still trying to get this muck off and it's a soul destroying job. Phoenix paints PQ19 pre paint cleaner does soften it up a bit without damaging the enamel paint underneath, but it's still a horrible job. Link to post Share on other sites More sharing options...
RMweb Premium Torper Posted December 5, 2020 RMweb Premium Share Posted December 5, 2020 5 hours ago, rob D2 said: I always find copydex isn’t cheap, and maskol is such a lovely purple colour And notwithstanding what Ian says, it works. If you don't believe me, have a look at the reviews on Amazon - 4.6 star average rating out of 388 global reviews. DT Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now