Deviousweegee Posted November 24, 2020 Share Posted November 24, 2020 Hi all, Relatively new around here and have decided to finally share my WIP layout, I have been in to the hobby for many years and finally got a chance to create a layout of my own. The layout is built inside a cupboard that i believe is roughly 4ft by 8ft. It is supposed to be modern image but I am happy to run anything. Its OO Gauge and DCC controlled using Bachmann Dynamis. The main area of the layout is planned to be a Freightliner depot with Diesel locos such as Class 66, 70, 08s and electric 90s but I also have quite a few GBRF and EWS locos. Intermodal wagons make up most of the concists along with some passenger stock such as Class 153, 450 etc. The opposite side of the layout is intended to contain a station and perhaps another small yard. I like to think it is based in and inspired by the South of England including Southampton docks and Eastleigh works as well as the main line from Southampton to London I have a YouTube Channel with a couple of videos of the Freightliner depot (Early stages) https://www.youtube.com/channel/UCn7afRMI_Pc-4hHzgtLCAiw I have decided to build this layout in a relatively small area and intend to show that you don't need masses of space to have a detailed functional layout. Your advice and recommendations are welcome and I will do my best to do regular updates and answer your questions 10 Link to post Share on other sites More sharing options...
Deviousweegee Posted November 25, 2020 Author Share Posted November 25, 2020 (edited) I am struggling to think of ideas for one of my empty areas, I like the idea of it being an entrance to a rail works but perhaps with a shed. I bought and build a peco engine shed but seems a little big. Any ideas? Edited November 25, 2020 by Deviousweegee Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted November 25, 2020 RMweb Gold Share Posted November 25, 2020 (edited) Maybe something industrial? with a low relief factory of some description and/or a crane maybe? Please excuse the cr@ppy sketch I’m sure @MrWolf could do you a better one. Chris Edited November 25, 2020 by chuffinghell Cr@ppy sketch added 1 Link to post Share on other sites More sharing options...
MrWolf Posted November 25, 2020 Share Posted November 25, 2020 I deny everything. What was the question? 2 Link to post Share on other sites More sharing options...
Deviousweegee Posted November 26, 2020 Author Share Posted November 26, 2020 21 hours ago, chuffinghell said: Maybe something industrial? with a low relief factory of some description and/or a crane maybe? Please excuse the cr@ppy sketch I’m sure @MrWolf could do you a better one. Chris Great idea, thank you 1 Link to post Share on other sites More sharing options...
Deviousweegee Posted November 28, 2020 Author Share Posted November 28, 2020 November 2020 Acquisitions for the layout Bachmann 32-740 Class 66 66789 GBRF British rail Bachmann 32-741 Class 66 66783 GBRF Biffa Bachmann 31-585Z Class 70 70001 Freightliner PowerHaul Limited edition Let me know if you want to see any more images or videos of these in action Link to post Share on other sites More sharing options...
Deviousweegee Posted January 20, 2021 Author Share Posted January 20, 2021 A little late December 2020 Acquisitions for layout Bachmann 31-999 10000 LMS BR Bachmann 32-762z Class 57 Network rail Hornby r40141 L&MR Third class coach Link to post Share on other sites More sharing options...
shanks522 Posted January 21, 2021 Share Posted January 21, 2021 On 25/11/2020 at 07:35, Deviousweegee said: I am struggling to think of ideas for one of my empty areas, I like the idea of it being an entrance to a rail works but perhaps with a shed. I bought and build a peco engine shed but seems a little big. Any ideas? hello, how about some oil sidings? Two tracks, enough for half a dozen TTA wagons? 1 1 Link to post Share on other sites More sharing options...
Deviousweegee Posted January 22, 2021 Author Share Posted January 22, 2021 14 hours ago, shanks522 said: hello, how about some oil sidings? Two tracks, enough for half a dozen TTA wagons? Yeah that sounds like a great idea, thank you 1 Link to post Share on other sites More sharing options...
Deviousweegee Posted January 24, 2021 Author Share Posted January 24, 2021 Fuel point progress The road running next to the point is installed I decided to make the hardstanding area out of concrete rather than asphalt for some variety I'm happy with the look of the concrete, I will paint road markings/safety lines around the are once dry I used AK Interactive for both surfaces as I like the finish they leave and realative ease of use I'm open to suggestions on this area so any help Is very welcome 1 Link to post Share on other sites More sharing options...
shreives Posted January 26, 2021 Share Posted January 26, 2021 Hi have you thought about maybe adding a loop at one end? Or maybe both if space allowed. Would give you some storage space for some wagons. Stuart 1 Link to post Share on other sites More sharing options...
Deviousweegee Posted February 1, 2021 Author Share Posted February 1, 2021 Update 01/02/21 I have decided to install some shelves for my various locos and stock, after many weeks of trying to find the solution I discovered Picture frame shelves The ones I have selected are the ideal size for up to four large locos and or their boxes The ones I chose are white 1200x100mm of which there are a few sizes and colours (Link to product) https://www.homebase.co.uk/photo-shelf-white-matt-120cm_p484470?gclid=EAIaIQobChMI4-mb9K3J7gIVQe7tCh0NDQliEAQYASABEgJK8vD_BwE&gclsrc=aw.ds They come with the appropriate fixings for masonry and plasterboard as well as easy to follow fitting instructions They are of a relatively sturdy construction which I am happy to trust my locos with I have a couple of negative points which are that the finish on a couple of them isn't to the highest standard e.g. some small scratches and marks but that isn't a big deal to me because of the low price. Also one of the four shelves I bought did not come with any fixings whatsoever, although this isn't the end of the world for me as I have spare screws/wall plugs (I believe ones supplies are standard sizes) At only £11 each and less for small/ narrower shelves I believe they are good value for money and provide ample storage for that cost If anyone has any questions I'll be happy to answer them and also provide more pictures Link to post Share on other sites More sharing options...
Deviousweegee Posted February 2, 2021 Author Share Posted February 2, 2021 Small update: Additional shelves installed Positioning isn't perfect but I'm happy with it 1 Link to post Share on other sites More sharing options...
Deviousweegee Posted February 6, 2021 Author Share Posted February 6, 2021 Mini update 06/02/21 Added more stock shelves to create three levels and also bough some layout accessories such as a layout name plaque from Scale Model Scenery so I will be painting that and adding it to the layout very shortly 1 Link to post Share on other sites More sharing options...
Deviousweegee Posted July 6, 2021 Author Share Posted July 6, 2021 Update 06/07/21 After a couple of months of neglect I have had a clear out on the layout, I have reorganised the whole room and added a new display shelf. I have bought a new set of drawers for storage and have reorganised all of my stock boxes and tools ad well as chucking out a load of old boxes and old craft materials. As you can see me being away from the layout hasn't stopped the Acquisitions and I have the Bachmann Pride if Britain pack on display. I have also put my collection of shipping containers on display (C-Rail, Dapol and Bachmann) Any suggestions or ideas are welcome 1 Link to post Share on other sites More sharing options...
Deviousweegee Posted July 8, 2021 Author Share Posted July 8, 2021 (edited) I have begun a scratch build engine shed for my tmd I have completed the entire shell, it just needs some details and textures. I would be grateful if someone could recommend me and suppliers for these parts and also any tips are very welcome Edited July 8, 2021 by Deviousweegee Link to post Share on other sites More sharing options...
Deviousweegee Posted August 3, 2021 Author Share Posted August 3, 2021 (edited) Update 03/08/21 I have put up more stock storage shelves and begun putting in a platform (very early stages) Only new acquisitions are a Bachmann DB Schenker HKA wagon and a newly completed cambrian salmon wagon kit I have also been uploading to YouTube, feel free to take a look! https://youtube.com/channel/UCn7afRMI_Pc-4hHzgtLCAiw Stay tuned for more! Edited August 3, 2021 by Deviousweegee Spelling Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now