APT Fan Posted December 17, 2020 Share Posted December 17, 2020 Good Evening, Does anybody have any experience of removing the glazing units from a Lima Class 50? It looks like the cab is glued into the glazing unit as it is difficult to seperate them, but I can't be sure. Thanks Link to post Share on other sites More sharing options...
RMweb Gold Dagworth Posted December 17, 2020 RMweb Gold Share Posted December 17, 2020 From memory if you pull the body sides outwards far enough you should be able to get the whole glazing unit and can interior to come out cleanly. Andi Link to post Share on other sites More sharing options...
APT Fan Posted December 17, 2020 Author Share Posted December 17, 2020 Well that was a bit nerve wracking! So I put a small screwdriver at the top of the cab wall and turned it in order to break the glue seal at each side of the joining point with the glazing unit. Despite the cab removed the galzing unit still wouldn't come out until I prized the windscreen from the front frame using a screwdriver again. Phew! On with the painting the inside now to prevent light bleed when the lighting is fitted. Its the large logo version and I have to say that despite its age, this is a really nice model. Thanks for the replies. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now