dasatcopthorne Posted January 11, 2021 Share Posted January 11, 2021 Suggest you re-seat the four wires in the screw terminals. Can you take the two track wires to a spare unconnected piece of track instead of your layout to test locos? Dave. Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted January 11, 2021 RMweb Premium Share Posted January 11, 2021 3 hours ago, dasatcopthorne said: Suggest you re-seat the four wires in the screw terminals. Can you take the two track wires to a spare unconnected piece of track instead of your layout to test locos? Dave. It was actually set up just on a spare piece of track. I'll redo all the connections. I have a nasty feeling there maybe a problem with it as its always been a bit temperamental but I have always put that down to user incompetence. Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted January 12, 2021 RMweb Premium Share Posted January 12, 2021 It's not unusual for a control board or connector inside to have become unseated. Internally, two of them are piggy-backed with an edge connector and it's not unknown for them to have separated slightly when the box is moved around Four screws on the bottom to remove the cover, then check the boards/connectors are together. Later issues of the PHPro box have ty-raps around the two boards to prevent them coming apart. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now