RMweb Gold Phil Bullock Posted February 1, 2021 RMweb Gold Share Posted February 1, 2021 (edited) South Worcestershire In 1971... how could we possibly justify a Manor? Oh hang on 7808 was just down the line at Ashchurch and escaped several times to open days .... And they all sound rather nice.... apologies for the awful photo at the beginning of the clip Edited February 1, 2021 by Phil Bullock 15 Link to post Share on other sites More sharing options...
60800 Posted February 1, 2021 Share Posted February 1, 2021 Saw the announcement and thought that they wouldn't do Dinmore in the first batch so my wallet was safe. Dug deeper...... Dinmore, Erlestoke AND Bradley in the first batch. Dear oh dear.... Which do I choose!?! Cheers, 60800 2 3 1 Link to post Share on other sites More sharing options...
Mark Posted February 1, 2021 Share Posted February 1, 2021 1 hour ago, Accurascale Fran said: Hi Mark, It is certainly something we will be paying attention to! Cheers, Fran Good luck with navigating the minefield of variations! I will certainly be in the market for one. Mark 3 Link to post Share on other sites More sharing options...
Pteremy Posted February 1, 2021 Share Posted February 1, 2021 3 hours ago, Global said: In terms of copying Dapol, as you say the announcement clearly shows this model has been in development since 2019 - and what decade was the, very likely inferior, Dapol model likely to arrive?! That is a bit unfair. The Dapol Manor is slated for 2021 release. The Mogul only took 3 years in gestation, the last year being the Covid disrupted 2020. If they learn from the feedback on the mogul then their manor could be excellent - it may still be 'inferior' in specification to Accurascale's, but inferior doesn't necessarily equate to no good. 1 5 Link to post Share on other sites More sharing options...
9402 Fredrick Posted February 1, 2021 Share Posted February 1, 2021 5 minutes ago, 60800 said: Saw the announcement and thought that they wouldn't do Dinmore in the first batch so my wallet was safe. Dug deeper...... Dinmore, Erlestoke AND Bradley in the first batch. Dear oh dear.... Which do I choose!?! Cheers, 60800 They aren't doing 7802, so I'm guessing you mean Hinton Manor? Link to post Share on other sites More sharing options...
Zunnan Posted February 1, 2021 Share Posted February 1, 2021 (edited) Its not a Kirtley 700 class, and this leads me to a very serious problem!... I could very happily do 7824 for location and timeframe squeeze with a change to late crest green...well, not that you could see the crest on it (or any trace of green paint) when it eked out its final days around here. But lined black just sits so well on them, and 20 wasn't a local machine until it went green...See? Serious problem! A 700 would solve this very taxing issue! Count me in for 7824 Edited February 1, 2021 by Zunnan Link to post Share on other sites More sharing options...
RMweb Premium MrTea Posted February 1, 2021 RMweb Premium Share Posted February 1, 2021 Looks good. And keenly priced for the specs. Anyone know when Rapido are announcing their Manor? 1 3 Link to post Share on other sites More sharing options...
SteamingWales Posted February 1, 2021 Share Posted February 1, 2021 9 minutes ago, 9402 Fredrick said: They aren't doing 7802, so I'm guessing you mean Hinton Manor? It appears 7802 is being produced based on what was accidentally listed by Rails and indications for Erlestoke Manor Trust Link to post Share on other sites More sharing options...
Big James Posted February 1, 2021 Share Posted February 1, 2021 Fair play. I’ve looked on with envy at some of your diesels. And they look sublime. I might be tempted by one of these as I’ve seen quite a few preserved manors. Might we see a U class afterwards at some point? Big James 2 Link to post Share on other sites More sharing options...
RMweb Gold TravisM Posted February 1, 2021 RMweb Gold Share Posted February 1, 2021 (edited) I’ve just seen the latest Accurascale announcement, I’m bowled over by it and though I won’t be buying one (wrong era and wrong region), it’s a great model to dip your toe into the steam loco pool. Not too big or ambitious and I’m sure it will be a great seller. Keep up the amazing and outstanding work. Edited February 1, 2021 by jools1959 1 3 1 Link to post Share on other sites More sharing options...
Bulwell Hall Posted February 1, 2021 Share Posted February 1, 2021 2 hours ago, Accurascale Fran said: Well @Captain Kernow, we tried to find a solution. We really did. But steam really stumped us on such conversions, so sadly unless you go to great butchery lengths our Manor will be merely OO! Cheers! Fran Fran The new Manor looks fabulous - well done! But what are the issues in converting it to EM gauge? Is it the clearance inside the splashers or is it the slide bars? Gerry 1 Link to post Share on other sites More sharing options...
MattA Posted February 1, 2021 Share Posted February 1, 2021 1 hour ago, 60800 said: Saw the announcement and thought that they wouldn't do Dinmore in the first batch so my wallet was safe. Dug deeper...... Dinmore, Erlestoke AND Bradley in the first batch. Dear oh dear.... Which do I choose!?! Cheers, 60800 If you're modelling preservation era and you have a keenness for detail, be aware the Dinmore's tender in preservation is not the same as that on the model. Also Bradley's rarely used the 3500 gal tender in preservation, most recently when Erlestoke was out of service. 1 1 Link to post Share on other sites More sharing options...
60800 Posted February 1, 2021 Share Posted February 1, 2021 1 minute ago, MattA said: If you're modelling preservation era and you have a keenness for detail, be aware the Dinmore's tender in preservation is not the same as that on the model. Also Bradley's rarely used the 3500 gal tender in preservation, most recently when Erlestoke was out of service. Hi Matt, Yeah I just noticed that. I want to model 7820 with the smaller tender she had at the GCR but both black manors being produced have the flush version when I want the riveted which is a shame. Bradley equally had the larger tender when I rode behind it so that is wrong for me too. Makes my decision between the three rather a bit easier sadly. Erlestoke it is then! - typically the only one of the three I've seen in steam but haven't rode behind. Cheers, 60800 1 Link to post Share on other sites More sharing options...
Miss Prism Posted February 1, 2021 Share Posted February 1, 2021 Slidebars are far too thin. No excuse for having them this thin, especially in 00. A good cheat would be to shift the piston rod axis 0.5mm outboards. The elliptical crankpin nuts are very strange... Link to post Share on other sites More sharing options...
Miss Prism Posted February 1, 2021 Share Posted February 1, 2021 One of the best bits from the video was "we have quite a few steam locomotives in the pipeline". Cue even more frothing than usual. 2 1 1 Link to post Share on other sites More sharing options...
RMweb Premium figworthy Posted February 1, 2021 RMweb Premium Share Posted February 1, 2021 repeat until cows_come_home "I do not need a Manor" However, given my location, perhaps 7840 will live after all 1 Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted February 1, 2021 Author RMweb Gold Share Posted February 1, 2021 6 minutes ago, Miss Prism said: Slidebars are far too thin. No excuse for having them this thin, especially in 00. A good cheat would be to shift the piston rod axis 0.5mm outboards. The elliptical crankpin nuts are very strange... Hi @Miss Prism, Can you point us in the direction of a model that has wider slidebars as a reference? Cheers! Fran 3 Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted February 1, 2021 Author RMweb Gold Share Posted February 1, 2021 29 minutes ago, Miss Prism said: The elliptical crankpin nuts are very strange... Hi @Miss Prism, Can you be more specific? Thanks, Fran Link to post Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted February 1, 2021 RMweb Premium Share Posted February 1, 2021 23 minutes ago, Accurascale Fran said: Hi @Miss Prism, Can you point us in the direction of a model that has wider slidebars as a reference? Cheers! Fran Here’s an image direct from the Dinmore Manor blog. About a 3rd of the way down the page. http://7820dinmoremanor.blogspot.com/2013/07/progress-through-june-and-early-july.html?m=1 3 Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted February 1, 2021 Author RMweb Gold Share Posted February 1, 2021 13 minutes ago, Hilux5972 said: Here’s an image direct from the Dinmore Manor blog. About a 3rd of the way down the page. http://7820dinmoremanor.blogspot.com/2013/07/progress-through-june-and-early-july.html?m=1 Hi @Hilux5972, Many thanks for that. As you can imagine, we have lots of good photos of this area too. There is an issue with clearance here, but there is every chance we can make it wider and more prototypical. Our design team will go through it as part of the sample assessment and as it is metal and small plastic parts it should be straightforward to alter if tolerances allow. Cheers! Fran 7 Link to post Share on other sites More sharing options...
RMweb Gold tomparryharry Posted February 1, 2021 RMweb Gold Share Posted February 1, 2021 Slightly left of topic, but here goes... The days of 'being the only game in town' appear to be fast diminishing. Just a few years ago, there was only 2 'players', so you got what's going. Nowadays, the field is a bit more open. The prospect of 'we can get away with this' may not be the case any more. One interesting point is that the 'current catalogue' of Western RTR is somewhat limited. In that case, it's a straight choice between upgrading an existing model, or delve into the 'back catalogue'. A fellow poster on here asked the straightforward question:- "What would happen if a newer, more detailed model of a 57xx were released? A good question indeed....The Western 'back catalogue' is indeed extensive, with some very notable examples. The old adage of 'quality sells' trumps most things. Thumbing through my lists, I see a lot of the class made it down to South Wales, so no problem there. Interesting times, and hopefully an interesting future.... 1 2 1 Link to post Share on other sites More sharing options...
NIK Posted February 1, 2021 Share Posted February 1, 2021 7 hours ago, Miss Prism said: Let's hope the 'wonderfully smooth operating motor' will get a wonderfully realistic gear ratio. I feel the 'Gearing arranged so locomotive can achieve a scale top speed of 90 mph' is inappropriate. Manors ran out of puff above 40mph... Hi, The video near the beginning of this thread mentioned Manors were sometimes attached to diesel hauled trains to provide steam heat and also used double headed at least once with a more powerful loco on a rail tour so that may justify going for a higher top speed. I model the Reading to Redhill line so I may be tempted to get a Manor as they were used on that line once Reading got an allocation of Manors. Regards Nick 1 1 Link to post Share on other sites More sharing options...
RMweb Gold tomparryharry Posted February 1, 2021 RMweb Gold Share Posted February 1, 2021 55 minutes ago, Miss Prism said: Slidebars are far too thin. No excuse for having them this thin, especially in 00. A good cheat would be to shift the piston rod axis 0.5mm outboards. The elliptical crankpin nuts are very strange... Without offending anyone, may I suggest the illustration here is actually the crosshead pin. It is in backwards ( IE, nut outwards ) but don't worry, I've seen that on the full-size stuff as well. Cue one joker.... " Why can't I get the nut on?" 1 Link to post Share on other sites More sharing options...
Miss Prism Posted February 1, 2021 Share Posted February 1, 2021 27 minutes ago, Accurascale Fran said: Can you be more specific? Yes: The prototype has a prominent round bit with a smaller radiused front elliptical bit. Your transcription emphasises the smaller elliptical bit and sort of misses the bigger round thing aspect. I'm being Miss Picky of course, but that is what I'm here for. 2 1 1 2 1 Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted February 1, 2021 Author RMweb Gold Share Posted February 1, 2021 15 minutes ago, Miss Prism said: Yes: The prototype has a prominent round bit with a smaller radiused front elliptical bit. Your transcription emphasises the smaller elliptical bit and sort of misses the bigger round thing aspect. I'm being Miss Picky of course, but that is what I'm here for. Not at all, we appreciate the feedback! We will look into it and see if it’s something we can improve. It’s what our first samples are for. Cheers! Fran 5 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Posted by AY Mod,
10 reactions
Go to this post
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now