Ruston Posted January 25, 2021 Share Posted January 25, 2021 (edited) What if Ruston & Hornsby had made the an 0-6-0 version of LSSE for industrial use? The project will use a Heljan BR Class 07 with an etched cab and etched engine casing overlays as a start. Card and paper mock up in place. Other changes will be to the cab steps and, of course, all those surplus lamps will be knocked off and a smaller air reservoir fitted. Don't expect rapid progress on this one. Edited April 1, 2022 by Ruston 10 1 4 Link to post Share on other sites More sharing options...
5050 Posted January 26, 2021 Share Posted January 26, 2021 You mean the one in the photo isn't actually finished? I thought it didn't seem to be up to your usual standard of modelling........................ Link to post Share on other sites More sharing options...
avonside1563 Posted January 26, 2021 Share Posted January 26, 2021 31 minutes ago, 5050 said: You mean the one in the photo isn't actually finished? I thought it didn't seem to be up to your usual standard of modelling........................ I agree, the cab looks fantastic but the rest of the model........... 1 Link to post Share on other sites More sharing options...
Sandhole Posted January 26, 2021 Share Posted January 26, 2021 17 hours ago, Ruston said: What if Ruston & Hornsby had made the an 0-6-0 version of LSSE for industrial use? The project will use a Heljan BR Class 07 with an etched cab and etched engine casing overlays as a start. Card and paper mock up in place. Other changes will be to the cab steps and, of course, all those surplus lamps will be knocked off and a smaller air reservoir fitted. Don't expect rapid progress on this one. Sorry I haven't posted those photos of the Peak Forest 07. I can't find the damn things and my medical probs have come back a bit. I'll try at the weekend. This beast looks cool. Looking forward to where you take it. Regards, Chris. Link to post Share on other sites More sharing options...
Sandhole Posted January 26, 2021 Share Posted January 26, 2021 Quick shout for Hardy's Hobbies. I have got two of their 'Ugly's.' I have built a Sentinel of their's and was VERY satisfied. These bodies are even better. Sorry no photos. All I need now is one more new Terrier. Hardys Kits are great. Link to post Share on other sites More sharing options...
Gordon A Posted January 26, 2021 Share Posted January 26, 2021 18 hours ago, Ruston said: What if Ruston & Hornsby had made the an 0-6-0 version of LSSE for industrial use? The project will use a Heljan BR Class 07 with an etched cab and etched engine casing overlays as a start. Card and paper mock up in place. Other changes will be to the cab steps and, of course, all those surplus lamps will be knocked off and a smaller air reservoir fitted. Don't expect rapid progress on this one. That looks like the Ruston diesel hydraulic that was built for the M.o.D. Link to post Share on other sites More sharing options...
Hippel Posted January 26, 2021 Share Posted January 26, 2021 Don't they have something like that at the Chinnor and Princes Risborough? Paul. Link to post Share on other sites More sharing options...
Ruston Posted January 26, 2021 Author Share Posted January 26, 2021 4 hours ago, Gordon A said: That looks like the Ruston diesel hydraulic that was built for the M.o.D. The original idea was to convert the 07 (LSSE) to the LSSH (the MOD locos) but the construction of the model makes it difficult, if not impossible, to make the changes. The most obvious is the jackshaft drive, which could be done by scratchbuilding a new chassis and rods but this Heljan model is unlike anything I've seen before. The chassis is die cast and incorporates not only the buffer beams and running plate but fills a lot of the space inside the plastic engine casing and rear compartment. The rear compartment on the LSSH is shorter in length than that on the 07 and the chassis block also prevents this from being changed. It would mean scratchbuilding a complete chassis, running plate, buffer beams and steps, plus new rods etc. The only surviving parts would be the plastic casings. I may be able to mill the block inside the rear compartment and thus cut down the length of the plastic outer casing but well see... 1 1 Link to post Share on other sites More sharing options...
Gordon A Posted January 26, 2021 Share Posted January 26, 2021 A youtube video of the AVR diesel gala with footage of the M.o.D version that was with us for a few years. The black diesel is a Baguely that was shipped to Suez at the time of the Suez chrisis. Gordon 1 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted January 27, 2021 RMweb Gold Share Posted January 27, 2021 14 hours ago, Ruston said: The original idea was to convert the 07 (LSSE) to the LSSH (the MOD locos) but the construction of the model makes it difficult, if not impossible, to make the changes. The most obvious is the jackshaft drive, which could be done by scratchbuilding a new chassis and rods but this Heljan model is unlike anything I've seen before. The chassis is die cast and incorporates not only the buffer beams and running plate but fills a lot of the space inside the plastic engine casing and rear compartment. The rear compartment on the LSSH is shorter in length than that on the 07 and the chassis block also prevents this from being changed. It would mean scratchbuilding a complete chassis, running plate, buffer beams and steps, plus new rods etc. The only surviving parts would be the plastic casings. I may be able to mill the block inside the rear compartment and thus cut down the length of the plastic outer casing but well see... Might the Craftsman kit be the way to go, separate components and all that? Mike. Link to post Share on other sites More sharing options...
SirBud Posted January 27, 2021 Share Posted January 27, 2021 My favourite photo of the hydraulic version of the loco is Victoria - it oozes character. Can't remember where I found this on line - it was some time ago and I did not take notes. I've often thought that if someone sold a 7mm kit of the Class O7 then it would be worth modifying it to try and achieve a reasonable representation of the industrial hydraulic version. The photo must have been taken on a summer day where Stoke on Trent (my birth place) got a bit too close to the sun. Looks like it was very warm in the cab. The photo is clearly at least late 1960's since the overhead line equipment on the Manchester to Stoke main line is evident. 5 Link to post Share on other sites More sharing options...
Gordon A Posted January 27, 2021 Share Posted January 27, 2021 From the Avon valley railway's web page: Currently on loan / hire to the Elsecar Railway. RUSTON HORNSBY 0-6-0DH NO.429 Pre TOPS number: 429 ‘River Annan’/’Salty’ Construction year: 1961 Builder/Number: Ruston Hornsby (466618) In Service Built in 1961, MOD No. 429 “River Annan” is a Ruston Hornsby LSSH 0-6-0DH (diesel hydraulic) shunting engine. It is currently on loan to Elsecar Heritage Railway. On the face of it, it looks very similar to the BR Class 07 – and there’s a reason for that! The Class 07 was based on the Ruston Hornsby LSSE – the diesel electric version of the same locomotive, albeit with a few modifications and extras. Powered by a 275 hp Paxman 6RPHL 29-litre V6 engine, Twin Disc torque convertor and two-speed final drive, the LSSH is a capable short wheel base shunter, capable of handling heavy trains over short distances and tight curves. Nowadays, No. 429 is generally confined to Bitton Station but has been a regular performer at Bitton in the past, capable of handling 4 or 5 coach trains and keeping to the timetable! This flexibility means it’s often rostered as a standby or “thunderbird” locomotive at special events. The livery isn’t original and is a key to its past life acting as “Salty” during Day Out With Thomas events. 2 Link to post Share on other sites More sharing options...
RMweb Gold Regularity Posted January 27, 2021 RMweb Gold Share Posted January 27, 2021 On 26/01/2021 at 12:24, 5050 said: You mean the one in the photo isn't actually finished? I thought it didn't seem to be up to your usual standard of modelling........................ There you go again: judging people by your own standards... 1 Link to post Share on other sites More sharing options...
Ruston Posted February 23, 2021 Author Share Posted February 23, 2021 (edited) I am always putting bits of builds into my layout thread, even if the builds are sometimes done for other people, or aren't specifically for the layout, so I have decided to put them all in one place from now on. I have tried a blog but they are difficult to keep track of and there's never much feedback on them, so here we are... At the moment I am just finishing off a repaint/weather of a Heljan Class 05, which has been industrialised. It will be going on the layout that I sold a few months ago - White Peak Limestone & Tarmacadam. My own current project is this: It does look a bit of a mess at the moment but fingers crossed... Edited April 1, 2022 by Ruston 15 Link to post Share on other sites More sharing options...
Barclay Posted February 23, 2021 Share Posted February 23, 2021 Looks interesting..... Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted February 23, 2021 RMweb Gold Share Posted February 23, 2021 I agree with your sentiments about blogs. If you don't post something everey day, it's a devil to find your last contribution. Seeing all of the details of how you go about your builds will provide plenty of inspiration to some of us on here . . . . . . 1 Link to post Share on other sites More sharing options...
Barnaby Posted February 23, 2021 Share Posted February 23, 2021 EEEEEEEK that is frightening Dave but I'm sure with your skills it will appear resplendent if not a little smoky and greasy from its hard working environment. Best Link to post Share on other sites More sharing options...
Sandhole Posted February 23, 2021 Share Posted February 23, 2021 I owe you an apology Dave. I still can't find my shots of the Buxton Lime 07 loco. I'll keep on looking. Regards, Chris. Link to post Share on other sites More sharing options...
RMweb Gold Sweet pea Posted February 23, 2021 RMweb Gold Share Posted February 23, 2021 Dave it's great that you are keeping it in one place. I'm certain your build project will be just as good as your previous ones. Link to post Share on other sites More sharing options...
Ruston Posted February 24, 2021 Author Share Posted February 24, 2021 (edited) Thanks for the interest, chaps. I have made some progress on the lump of filler. Can you tell what it's going to be yet? Edited April 1, 2022 by Ruston 3 Link to post Share on other sites More sharing options...
Barclay Posted February 24, 2021 Share Posted February 24, 2021 Ship Canal Hudswell? Link to post Share on other sites More sharing options...
Barclay Posted February 24, 2021 Share Posted February 24, 2021 Brush/Bagnall? 1 Link to post Share on other sites More sharing options...
Ruston Posted February 24, 2021 Author Share Posted February 24, 2021 3 hours ago, Barclay said: Brush/Bagnall? Yes. I'm not sure if it's going to be like the NCB pair, or the Stewarts & Lloyds pair yet. 1 Link to post Share on other sites More sharing options...
RMweb Gold Sweet pea Posted February 24, 2021 RMweb Gold Share Posted February 24, 2021 I will admit I do like the shape of the NCB brush/bagnall. Link to post Share on other sites More sharing options...
Popular Post Ruston Posted February 26, 2021 Author Popular Post Share Posted February 26, 2021 (edited) This Ruston & Hornsby 165DE has really kicked my arse. It's now up and running, requiring only a few small details to be added but is on its fourth motor and second gearbox. The first motor was a Chinese copy of a Mashima 10/15, which failed and seemed to have too much end float. I replaced it with one in the photo, below, which seemed to run well enough but whilst on the rolling road it too started to make a grating noise and then stopped dead. I don't know what went wrong but turning the gearbox by hand seemed to be more difficult in one direction than the other, which led me to think that I had somehow assembled it wrongly. This gearbox was a High Level Lo-loader, which when I got it out of the loco, I could find nothing wrong at all. Gearbox back in and on to the third motor, this time a coreless thing. Again, it ran fine in one direction but made a horrendous noise in the other. This time I swapped the gearbox for a 90:1 Humpshunter, which I took out of an abandoned project but I knew that it worked perfectly. The same thing happened again and I decided that it must be the motor. Off with the coreless and on with a Mitsumi - this time it ran well and quietly in both directions. I must have just been unlucky to have three motors in a row that were no good. I have never used the coreless type before but I have used the others with no problems. It is now fitted with DCC, a Zimo MX648, with Ruston 165DS sound project, by Paul Chetter, a Kunfgu stay alive and a Youchoos 15x11x6mm speaker. The block buffers were milled from brass and are based on those fitted to the 165 that worked at Hebburn shipyard. I have never seen any others like them and as they aren't simply lumps of wood I wonder if they are an original Ruston fitting. The photo I used was in colour and it seemed that they weren't rusty or scratched, so could have been made from rubber or some similar shock-absorbing material. The loco weighs in at 171g, thanks to the brass buffers and lots of lead. I managed to get the stay alive and speaker within the frames, so the under-bonnet space was free for weighting. The cab also has a lead lined floor and walls, below window level. I am really not sure about my colour choice. The Hebburn loco was a dark brown and I would have painted it something similar but I don't have any brown and can't get any. I may repaint it in green. It now needs grab handles above the front steps, rear sand boxes, fuel and water fillers and lamps. I lost the fillers that came with the kit, so I'll have to improvise. It also needs a Ruston plate for the front and Ruston/AEI plates for the cab. Ruston plates are provided in the kit but they are brass. As the prototypes were aluminim alloy, I need nickel silver plates. Edited April 1, 2022 by Ruston 20 6 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now