BR Letter transfers needed.

[cypherman]

Hi all,

I need the BR diesel engine letter D for numbering some of my diesels. But I cannot seem to find any transfer sets with the letters on. I have several sets that just have the numbers. Any one know who makes some of these transfers.

Thanks.

[cravensdmufan]

Green or blue livery type?  And what scale?

 

If OO blue, I have some spare as I model the TOPS era.  PM me and I'll pop them in the post to you FOC.

Edited March 7, 2021 by cravensdmufan
Additional wording

[cypherman]

Hi Craven. Sorry was not clear. It is 00 but the early BR green livery. Thanks for the offer though

[RexAshton]

Worth a look here?

[stewartingram]

I've recently done an 04 tram (W&U type) as D2202, with a small D and steam type 2202. All from Fox, but I couldn't tell you which sheet numbers as I already had them in stock.

 

Stewart

[bazjones1711]

I have some Modelmaster ' D ' they are from the set 4802 Pre TOPS numbers for diesel shunters and type 1 locos , they are a standard D , pm me if these are what you require .

Not the best photo !

 

 

[cypherman]

8 hours ago, RexAshton said:

Worth a look here?

Hi Rex,

Thanks for the link. But currently they are out of stock. So will have to either wait or look else where.

[RexAshton]

10 hours ago, cypherman said:

Hi Rex,

Thanks for the link. But currently they are out of stock. So will have to either wait or look else where.

If you contact Steve at Railtec he may be able to tell you when they'll be available or you can click on the 'notify me' link on the site.

[railtec-models]

11 hours ago, cypherman said:

Hi Rex,

Thanks for the link. But currently they are out of stock. So will have to either wait or look else where.

 

When time permits I'll be replenishing the dry rub-ons, but at present I can't say when that will be. Meanwhile, if it helps you, I've just created a parallel version of this pack as completely filmless waterslide:

 

https://www.railtec-models.com/showitem.php?id=4369

 

Ok it's not dry rub-on but as the alpha numerics are filmless then there's still absolutely zero carrier and you get the wiggle room of being able to manoeuvre the digits into place before setting, unlike the rub-on of course where you have to get it right first hit. At least now there's another option for you.

 

[Edit] I meant to add, there's also a traditional 2d waterslide offering for this topic, in case you'd missed it:

https://www.railtec-models.com/showitem.php?id=1157

 

Steve

 

 

 

Edited March 8, 2021 by railtec-models

[cypherman]

46 minutes ago, railtec-models said:

 

When time permits I'll be replenishing the dry rub-ons, but at present I can't say when that will be. Meanwhile, if it helps you, I've just created a parallel version of this pack as completely filmless waterslide:

 

https://www.railtec-models.com/showitem.php?id=4369

 

Ok it's not dry rub-on but as the alpha numerics are filmless then there's still absolutely zero carrier and you get the wiggle room of being able to manoeuvre the digits into place before setting, unlike the rub-on of course where you have to get it right first hit. At least now there's another option for you.

 

[Edit] I meant to add, there's also a traditional 2d waterslide offering for this topic, in case you'd missed it:

https://www.railtec-models.com/showitem.php?id=1157

 

Steve

 

 

 

Hi Steve, I have just ordered the waterslide version of these transfers. Many thanks for the link.

Edited March 8, 2021 by cypherman

[cypherman]

Hi all,

Many thanks to every one who has offered to send me some transfers. I have bought a set from Railtec earlier today. Again many thanks to those who have offered.