Krieghoff Posted March 14, 2021 Share Posted March 14, 2021 Hi folks. Looking to get a Soldering iron and accessories for my modelling project. There are hundreds to choose from. Anyone got any suggestions or indeed a preferred brand etc. Thanks Link to post Share on other sites More sharing options...
gordon s Posted March 14, 2021 Share Posted March 14, 2021 I’ve had an Antex 660TC for years and very pleased with it. Plenty of power and temperature controlled. It appears to have been replaced by a new model which I’m sure will be just as good. https://www.rapidonline.com/antex-soldering-iron-station-660tc--85-4750 Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted March 14, 2021 RMweb Gold Share Posted March 14, 2021 I can't speak for their soldering stations but their temperature controlled (TCS) ones aren't the quality they used to be Link to post Share on other sites More sharing options...
Steamport Southport Posted March 14, 2021 Share Posted March 14, 2021 (edited) You don't say what you will be soldering. You'll get a different answer if it's electrics rather than something like brass kits. Normal Antex. I can't get on with soldering stations or temperature controlled. YMMV. For jobs that need a lower temperature then an 18W or 25W. Hattons currently have this which is a bargain IMHO and comes with the stand. They usually have the 25W as well. They must be out of stock. https://www.hattons.co.uk/44821/expo_drills_tools_77751_antex_sk8_model_cs_soldering_iron_kit_with_18_watt_iron/stockdetail.aspx For bigger jobs such as soldering O gauge etched brass kits I use a Weller 60 Watt. Which will solder virtually anything. But will reduce a whitemetal kit to a melted puddle. Jason Edited March 14, 2021 by Steamport Southport Link to post Share on other sites More sharing options...
robert17649 Posted March 14, 2021 Share Posted March 14, 2021 i'Ve used a 30W Antex for ages backed up by a Gascat for the layout itself. Whatever you use cleanliness and a decent flux are essential. You are quite correct there are as many as you can think of and everyone has their favorite ,,, But a clean well tinned bit and loads a flux will usually work. S in fact its which ever one you are most comfortable with. Anything around 30w simple to operate no dodgy controllers etc etc should do most things. be clean be quick. Link to post Share on other sites More sharing options...
doilum Posted March 15, 2021 Share Posted March 15, 2021 (edited) 11 hours ago, Steamport Southport said: You don't say what you will be soldering. You'll get a different answer if it's electrics rather than something like brass kits. Normal Antex. I can't get on with soldering stations or temperature controlled. YMMV. For jobs that need a lower temperature then an 18W or 25W. Hattons currently have this which is a bargain IMHO and comes with the stand. They usually have the 25W as well. They must be out of stock. https://www.hattons.co.uk/44821/expo_drills_tools_77751_antex_sk8_model_cs_soldering_iron_kit_with_18_watt_iron/stockdetail.aspx For bigger jobs such as soldering O gauge etched brass kits I use a Weller 60 Watt. Which will solder virtually anything. But will reduce a whitemetal kit to a melted puddle. Jason It is many years since I built a white metal loco (Piercy J,72), but if I recall correctly I quickly ditched the 12 volt iron and defaulted to a 60 watt Weller. The technique was a rapid in and out dab with instant results. No components were damaged in the making of the loco! This was over 30 years ago built to the dulcet tones of Ringo as he narrated episodes of Thomas the tank engine. These occupied my children and provided a 20 minutes of modelling on the dining room table. There is something to be said for working in short focused sessions. Today a 75watt Weller is the enforcer, rarely needed for modelling, I have an RSU (resistance soldering unit) but my constant go to iron is a pair of 15 quid adjustable oriental irons from the bay of E. I have two because I carelessly let the first attack it's cord and needed another to fix it. Thus i enjoy the luxury of having a choice of tiny or medium bits. I think the replacement came in a kit along with a miniature pair of side cutters and a multimeter for 25 pounds. Edited March 15, 2021 by doilum Link to post Share on other sites More sharing options...
gordon s Posted March 15, 2021 Share Posted March 15, 2021 11 hours ago, Steamport Southport said: Normal Antex. I can't get on with soldering stations or temperature controlled. YMMV. Jason Sorry Jason, what does YMMV mean? All I can find is Your Mileage May Vary....... I spent yesterday soldering a white metal kit with my 50W Antex at 275 degrees and 70 degree solder and it was perfect for the job. Another day I'll be soldering PCB track and it does that equally well. I haven't found a job that it can't do well yet, so I can only speak as I find. As always, personal experience will always give numerous answers, so it's down to individual choice. Link to post Share on other sites More sharing options...
RMweb Premium Steven B Posted March 15, 2021 RMweb Premium Share Posted March 15, 2021 I use an Antex CS18 for 90% of my soldering - get the one with the silicon cable, it's heat proof, more flexible and worth the extra three quid. It'll handle electrical work and kit building with out any problems unless you're working with large lumps of brass in which case more power will help. Antex have a wide range of bits/tips available and also have replacement elements available for their irons (although as I discovered last year you need a soldering iron to change them!). Steven B. Link to post Share on other sites More sharing options...
RexAshton Posted March 15, 2021 Share Posted March 15, 2021 I use one of these for everything. I only speak as a satisfied customer but it wipes the floor with my previous (Antex) soldering station. Link to post Share on other sites More sharing options...
woodyfox Posted March 15, 2021 Share Posted March 15, 2021 I do brass kits in 7mm so need heat 'punch'. I've just invested in this and it's very good with a 2.5mm bit. It comes with a finer bit which i've used for electrical stuff. It's a Hakko 70w station with a top temp of 480 degrees C. Cheers 1 Link to post Share on other sites More sharing options...
steve W Posted March 15, 2021 Share Posted March 15, 2021 20 hours ago, Bucoops said: I can't speak for their soldering stations but their temperature controlled (TCS) ones aren't the quality they used to be My experience also. Had three TCS50's in three years with nothing more than light bench soldering duties. Guarantees were OK though. When the third failed I switched to an Atten 50W temp controlled iron and havn't looked back. Hot in a few seconds and great to use. I do use Atten's own bits, the cheaper and compatible Chinese series 900 bits don't last as long. 1 Link to post Share on other sites More sharing options...
RMweb Premium Torper Posted March 15, 2021 RMweb Premium Share Posted March 15, 2021 (edited) 1 hour ago, woodyfox said: I do brass kits in 7mm so need heat 'punch'. I've just invested in this and it's very good with a 2.5mm bit. It comes with a finer bit which i've used for electrical stuff. It's a Hakko 70w station with a top temp of 480 degrees C. Cheers And it has a lowest temperature of 50 degrees C, which might be of intrerest to anyone loking to solder at lower temperatures. I've got one pof the Hakko stations and it is excellent, though probably rather pricier than the OP wants. Previously I had an Aoyue station, basically a Chinese Hakko clone not dissimilar to the Atten mentioned by Steve above, and it gave (indeed, as my reserve iron, still gives) years of troublefree service. Curiously, I never got on with the two Antex irons I had. The only real advice I would give to the OP is to get as powerful an iron as you can afford. That's nothing to do with heat - a 15W iron will heat up to just the same temperature as a 70w one - but everything to do with the ability to retain heat. DT Edited March 15, 2021 by Torper 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted March 15, 2021 Share Posted March 15, 2021 9 hours ago, gordon s said: Sorry Jason, what does YMMV mean? All I can find is Your Mileage May Vary....... I spent yesterday soldering a white metal kit with my 50W Antex at 275 degrees and 70 degree solder and it was perfect for the job. Another day I'll be soldering PCB track and it does that equally well. I haven't found a job that it can't do well yet, so I can only speak as I find. As always, personal experience will always give numerous answers, so it's down to individual choice. Yes. Your mileage may vary. It means others will have a different viewpoint on ways of doing the same thing. Which is going to be the case here. ISTR (I seem to recall) it comes from the idea that other people will use a different route to get to the same place. We haven't got on to the myriad of different solders and fluxes yet.... 1 Link to post Share on other sites More sharing options...
gordon s Posted March 15, 2021 Share Posted March 15, 2021 Thanks Jason.Not heard that before, but as an old fella, life is slowly leaving me behind...... Link to post Share on other sites More sharing options...
doilum Posted March 15, 2021 Share Posted March 15, 2021 1 hour ago, Steamport Southport said: Yes. Your mileage may vary. It means others will have a different viewpoint on ways of doing the same thing. Which is going to be the case here. ISTR (I seem to recall) it comes from the idea that other people will use a different route to get to the same place. We haven't got on to the myriad of different solders and fluxes yet.... Or preparation techniques......... Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now