Timken Posted March 16, 2021 Share Posted March 16, 2021 (edited) I`m slowly pulling the basics for an 009/Hoe layout as finances allow! I have a couple of Roco coal wagons and just acquired a Roco diesel loco.One of the wagons is a really wobbly runner,the other perfect.Is this a one off or do you get variations with all RTR stock ? Thanks. Edited March 16, 2021 by Timken Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted March 16, 2021 RMweb Gold Share Posted March 16, 2021 Just now, Timken said: I`m slowly pulling the basics for an 009/Hoe layout as finances allow! I have a couple of Roco coal wagons and just acquired a Roco diesel loco.One of the wagons is a really wobbly runner,the other perfect.is this a one off or do you get variations with all RTR stock ? Thanks. With those it may be the insulated bush on the axle got squashed at some stage in assembly and the wheel is a little crooked. It does happen occasionally but not common. Link to post Share on other sites More sharing options...
Paul H Vigor Posted March 16, 2021 Share Posted March 16, 2021 (edited) Edited March 16, 2021 by Paul H Vigor to add information Link to post Share on other sites More sharing options...
Paul H Vigor Posted March 16, 2021 Share Posted March 16, 2021 44 minutes ago, Timken said: I`m slowly pulling the basics for an 009/Hoe layout as finances allow! I have a couple of Roco coal wagons and just acquired a Roco diesel loco.One of the wagons is a really wobbly runner,the other perfect.Is this a one off or do you get variations with all RTR stock ? Thanks. RTR - bought new? Or secondhand? Link to post Share on other sites More sharing options...
Timken Posted March 16, 2021 Author Share Posted March 16, 2021 2nd hand....... Link to post Share on other sites More sharing options...
Michael Hodgson Posted March 16, 2021 Share Posted March 16, 2021 perhaps that's why they were selling it Link to post Share on other sites More sharing options...
Woody C Posted March 16, 2021 Share Posted March 16, 2021 Peco rolling stock is usually good running but it is worth having a look at the underside of the wagons and the wheels themselves for anything obvious. Are the pinpoint axles properly located in the chassis bearing? Try spinning the wheel set with your fingers and it should spin freely and for at least several seconds. Any stiffness you may feel through your fingers whilst trying to spin them is usually a sign that the axle is not properly seated. Usually pulling the chassis gently sideways gives room for the axle to locate properly. Look at the chassis itself to see if it has twisted and I'm effect has trapped the wheel set. If so gently pulling will usually move the plastic back to where it should be. Another issue with secondhand stock that you buy can be dirty wheels. I have had wheels where dirt has built up in one spot on a wheel which then in effect makes the wheel out of true. In n gauge and 009 with relatively small wheels it only needs a small deposit to make the wagon look as though it is running drunk. On a steel wheel the black deposit of dirt is usually easy to see. On a plastic wheel a little more difficult but your finger tips/nails can usually feel the unusual shape of a dirt deposit . Hope that helps? Woody 1 Link to post Share on other sites More sharing options...
laurenceb Posted March 17, 2021 Share Posted March 17, 2021 The problem with Roco waggons is weight, or lack of it. they will bounce off the track 1 Link to post Share on other sites More sharing options...
Timken Posted March 17, 2021 Author Share Posted March 17, 2021 All points noted ,thanks! Link to post Share on other sites More sharing options...
stan williams Posted March 17, 2021 Share Posted March 17, 2021 Are you a member of the 009 society ? They have a sales dept and if there is a problem you can send them back and you do have access to a large number of items, plus the monthly newsletter/magazine. Well worth it as you could well recoup your membership fee in savings on stock. Stan. Link to post Share on other sites More sharing options...
Timken Posted March 17, 2021 Author Share Posted March 17, 2021 On 16/03/2021 at 19:12, PaulRhB said: With those it may be the insulated bush on the axle got squashed at some stage in assembly and the wheel is a little crooked. It does happen occasionally but not common. Had a good look at the wheel /axle fitting and one wheel on each axle of the offender was not fully pressed onto the axle...a little light tap knocked the axle further through and now it runs fairly smoothly!!!! Thanks for all the input! 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now