Crewlisle Posted April 10, 2021 Share Posted April 10, 2021 Some decoder manufacturers include 'sleeves' to fit over the decoders. Others say to ensure that there is nothing covering the decoder to ensure that there is 'movement of air' across the decoder to keep it cool. Which advice is best? Peter Link to post Share on other sites More sharing options...
johnb Posted April 10, 2021 Share Posted April 10, 2021 If the manufacturer provides a sleeve then I feel free to fit it if I feel it it needed, particularly if other metal is around. If they say keep it uncovered then I ensure that it is uncovered. It really all depends on the heat dissipation from a particular decoder and that will be the manufacturers decision to sleeve or not at the design/test stages. There are so many decoders that it is not possible to generalise. Some come with sealed sleeving prefitted anyway. I would follow the advice given for a particular decoder. Link to post Share on other sites More sharing options...
kev Posted April 10, 2021 Share Posted April 10, 2021 I always try to keep my electronics as cool as possible the cold it is the longer it will last learnt that when I first started in tv repairs 1 1 Link to post Share on other sites More sharing options...
ISW Posted April 11, 2021 Share Posted April 11, 2021 On 10/04/2021 at 16:14, Crewlisle said: Some decoder manufacturers include 'sleeves' to fit over the decoders. On 10/04/2021 at 16:14, Crewlisle said: Which advice is best? Peter, What do know is that a plastic sleeve is a good indicator if one of the chips on the DCC decoder has overheated / blown. The plastic simply melts above the offending chip! Ian Link to post Share on other sites More sharing options...
Crosland Posted April 12, 2021 Share Posted April 12, 2021 On 10/04/2021 at 16:14, Crewlisle said: Some decoder manufacturers include 'sleeves' to fit over the decoders. Others say to ensure that there is nothing covering the decoder to ensure that there is 'movement of air' across the decoder to keep it cool. Which advice is best? The particular decoder manufacturers' advice Having said that, there will be minimal airflow in anything but the largest loco bodies. It's going to rely on convection (unless you fit air scoops and ducting!) and the decoder is probably lying flat (maybe even with components face down) and not really able to take advantage. What you must ensure is that the decoder is electrically isolated. A sleeve or a bit of kapton tape will do this. Link to post Share on other sites More sharing options...
WIMorrison Posted April 12, 2021 Share Posted April 12, 2021 I have never seen a sleeve or heatshrink wrap on any of my Zimo decoders 1 Link to post Share on other sites More sharing options...
pauliebanger Posted April 12, 2021 Share Posted April 12, 2021 Depends on the type you use. Generally, ZIMO direct plug-in types have no heatshrink wrap, but any that are not firmly fixed by the interface, i.e. all 'wired', some versions of 6 pin, and all 8 pin decoders come wth a substantial heat shrink wrap. Best regards, Paul Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now