Dmudriver Posted April 10, 2021 Share Posted April 10, 2021 Hi. I've got a Digitrains sound file on a Zimo MX644 chip for a Heljan 128 v18.03. There is a double buzzer sound on F11 which I cannot get. The single buzzer is on F12 and works OK. A note I have says that the sound for the double buzzer is on CV 544 (the single buzzer is on CV 547). I've put CV 544 back to 0, then to 64 and then 128 but can't get any response. This is after a reset (CV8=8). Has anyone any thoughts as to how I might find the double buzzer sound? With thanks in advance. Rod Link to post Share on other sites More sharing options...
Albie the plumber Posted April 11, 2021 Share Posted April 11, 2021 I'm sure Pauliebanger will reply to you on this matter when he sees this post . He's always very helpful with all things ZIMO . I think it also might be his sound project 1 Link to post Share on other sites More sharing options...
Dmudriver Posted April 11, 2021 Author Share Posted April 11, 2021 I've since worked out that CV544 controls the volume of the sound on F11: it does not define which sound slot (is that the right expression?) is on F11. It does not work on any of the other functions, so somewhere on the decoder there's a sound slot missing a connection to F11. That, I think, is what I am looking for. I've also got a decoder for the Class 122 and F11 (double buzzer) works correctly on that one. I've looked at F11 on both the 122 and 128 and the value is 0 on both, so that's no indication as to where the sound slot might be!! I hope Pauliebanger can help. Rod Link to post Share on other sites More sharing options...
wiggy1 Posted April 11, 2021 Share Posted April 11, 2021 Would the 128 being a parcels unit have the double buzzer? Wiggy. Link to post Share on other sites More sharing options...
Dmudriver Posted April 11, 2021 Author Share Posted April 11, 2021 1 hour ago, wiggy1 said: Would the 128 being a parcels unit have the double buzzer? Wiggy. Good question, Wiggy, but I assume so. Particularly as I'm running it in a 3-car set: And here's the prototype: Rod 6 Link to post Share on other sites More sharing options...
Hairy Bear Digital Posted April 12, 2021 Share Posted April 12, 2021 17 hours ago, wiggy1 said: Would the 128 being a parcels unit have the double buzzer? Wiggy. Would have had a guard on board. Still need to be buzzed away after station duties done , so yes. 1 1 Link to post Share on other sites More sharing options...
pauliebanger Posted April 12, 2021 Share Posted April 12, 2021 Hi Rod, CV543 allocates the sound to F key 11. The double buzzer should be sample ID 16. So, CV543 = 16 should get the soundback again. Best regards, Paul Link to post Share on other sites More sharing options...
Dmudriver Posted April 12, 2021 Author Share Posted April 12, 2021 37 minutes ago, pauliebanger said: Hi Rod, CV543 allocates the sound to F key 11. The double buzzer should be sample ID 16. So, CV543 = 16 should get the soundback again. Best regards, Paul It does and it has!! Thank you very much for the advice, Paul. Much appreciated. Rod Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now