Porkscratching Posted April 12, 2021 Share Posted April 12, 2021 I'm wondering how the old style German "lollypop" type signals were operated, in the sense of how to represent this "on the ground" I haven't been able to find any pics showing whatever rods, wires, pulleys (or elec. cables ) etc would be present and how they were conveyed from signal box to the signal itself Link to post Share on other sites More sharing options...
Grovenor Posted April 12, 2021 Share Posted April 12, 2021 (edited) They generally used double wire working for both signals and points, ie there were two wires for each arm or point run out from the cabin. The two wires were kept under tension and for any other than very short runs there were tensioning weights along the route which were quite prominent at the lineside. The lever frames for double wire were of the turnover type where the lever moved through 180 degrees. A bit of googling should find images of all this stuff. eg https://janfordsworld.blogspot.com/2015/10/double-wire-working-of-points-and.html Edited April 12, 2021 by Grovenor 1 Link to post Share on other sites More sharing options...
Porkscratching Posted April 12, 2021 Author Share Posted April 12, 2021 That's brilliant, many thanks, I wasn't having much luck on t'internet myself ! Link to post Share on other sites More sharing options...
Michael Hodgson Posted April 12, 2021 Share Posted April 12, 2021 Much of Europe used turnover levers, illustrated here https://en.wikipedia.org/wiki/Lever_frame#/media/File:Mechanisches_Stellwerk_in_Hausen_im_Tal_(2018).jpg Traditional signalling practice in general was very different from ours. https://en.wikipedia.org/wiki/Railway_signals_in_Germany https://de.wikipedia.org/wiki/Stellwerk There is a lot more on the web in German and obviously it helps if you have the language, but the translation software works a lot better than it used to - though technical terms can be problematic. 1 Link to post Share on other sites More sharing options...
RMweb Premium readingtype Posted April 12, 2021 RMweb Premium Share Posted April 12, 2021 (edited) The MIBA guide by Stefan Carstens (German language) is very good: https://www.vgbahn.shop/mechanische-stellwerke-1 The pictures and diagrams tell you much of the story. I have a copy of the 'digital' edition in PDF but have not tried pasting the text into Google -- might work For information in English I'd like to plug the German Railway Society's series of signalling guides, but this aspect is not covered. The usage of signals and the terminology related to track layout and signals is very well covered though, so there's the plug. Anyone who is interested in a guide in English could leave a comment here... I cannot and will not make promises of any kind but the level of interest would be good to know. Disclosure: at time of writing I'm a member of the GRS. Ben Edited April 12, 2021 by readingtype clarification 1 Link to post Share on other sites More sharing options...
RMweb Premium readingtype Posted April 12, 2021 RMweb Premium Share Posted April 12, 2021 3 hours ago, Grovenor said: They generally used ... There are lots of mechanical signalling installations still operating in Germany, if you can get there :-) Often the signals are now operated by motors rather than cables. 1 Link to post Share on other sites More sharing options...
RMweb Premium 5944 Posted April 12, 2021 RMweb Premium Share Posted April 12, 2021 A couple of photos from a few years ago with semaphores. You can see the size of the counterweights in the second one. They're pretty hefty! I was stood on the steps of the signalbox, so at least the signaller didn't have to pull them too much. 3 Link to post Share on other sites More sharing options...
Porkscratching Posted April 12, 2021 Author Share Posted April 12, 2021 There's some good and interesting stuff there to study gents, many thanks.. From the modelling perspective, I'm looking for some images, as yet elusive, showing how the wire system connects at the base of the signal, so i can have some viable looking 'hardware' running along the track and 'working' the signal. This is purely cosmetic as it doesn't have to actually operate the signal which would be fixed / static. Link to post Share on other sites More sharing options...
RMweb Premium 5944 Posted April 12, 2021 RMweb Premium Share Posted April 12, 2021 My second photo was at the south end of Immelborn station. This photo by Gordon Edgar is at the North end. A proper signal box rather than just a small cabin like the South end! Looks easy enough to model - the wires go underneath a plate in front of the box. 2 1 Link to post Share on other sites More sharing options...
Porkscratching Posted April 12, 2021 Author Share Posted April 12, 2021 Good stuff ! It appears too that the wires just run straight into the signal itself, thru the pulley bearing brackets, as per Grovenor's diagram. I'm awaiting the signal kit to see what's there...hopefully two nice pulleys ready for the wires ! Link to post Share on other sites More sharing options...
Porkscratching Posted April 12, 2021 Author Share Posted April 12, 2021 Looks like the wires run into a box at the base of the signal, presumably inside are cranks or pulleys that work the rods or wires going up to the signal.... Link to post Share on other sites More sharing options...
Grovenor Posted April 12, 2021 Share Posted April 12, 2021 1 hour ago, 5944 said: A couple of photos from a few years ago with semaphores. You can see the size of the counterweights in the second one. They're pretty hefty! I was stood on the steps of the signalbox, so at least the signaller didn't have to pull them too much. The double wire compensator on the left of this picture is a vital lineside feature, you really need to find a side on view. Note that the weights are there to keep the wires tight regardless of temperature, they don't have to be lifted by the signalman*, the signals are a much lighter pull, 25% or less, than a single wire UK style signal. *The two weights are linked so that as soon as the tension in the two wires becomes unequal at the start of a pull the weights are locked up until the movement is complete and the tension becomes equal again. 1 1 Link to post Share on other sites More sharing options...
Porkscratching Posted April 12, 2021 Author Share Posted April 12, 2021 I found an Aussie version on the same principle, they're hefty weights certainly.. Link to post Share on other sites More sharing options...
johnofwessex Posted April 12, 2021 Share Posted April 12, 2021 The Midland also had some 'Barrel' frames with two wires rather than single wires/point rods 1 Link to post Share on other sites More sharing options...
RMweb Premium Ian Morgan Posted April 12, 2021 RMweb Premium Share Posted April 12, 2021 (edited) Hope these help: Levers Tensioner (pity about the pipe in the way) Edited June 22, 2023 by Ian Morgan re-loaded images 1 1 Link to post Share on other sites More sharing options...
RMweb Premium readingtype Posted April 15, 2021 RMweb Premium Share Posted April 15, 2021 Not the most inspiring photos, but these show the remains of the mechanism that converts the cable pull into a lever movement and some of the gubbins at the top of the mast. As shown above it's a cable drum with a cam follower inside it that moves a vertical rod to operate the Signalflügel (arm) This is a Schmalmast (narrow mast) rather than a Gittermast (lattice mast) but I don't think the different mast construction had much impact on the mechanism. The signal mast was lying beside the headshunt at Bahnhof Rennsteig in January 2018. 1. The remains of the casing covering the cam follower mechanism. This is the foot of the mast and the bolts through the holes on the L shaped angle held it down onto a concrete plinth. 2. Inside the casing showing cable still wrapped around the drum 3. Top of the mast showing the arm pivot and the Laterneblende (spectacle plate), with the foot of a second one beside it 1 1 Link to post Share on other sites More sharing options...
Porkscratching Posted April 15, 2021 Author Share Posted April 15, 2021 On the contrary, those are most interesting !... gives an idea as to what's going on inside the box, much appreciated. 1 Link to post Share on other sites More sharing options...
Porkscratching Posted April 17, 2021 Author Share Posted April 17, 2021 (edited) The kit I have for one of these is the Miniart version..looks very detailed and a good representation of the real thing.. l will probably use wire rod rather than the thin plastic rods that come with the kit ( which would likely break when removing from the kit sprues anyway) Edited April 17, 2021 by Porkscratching 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now