gingertrainspotter Posted October 26, 2010 Share Posted October 26, 2010 Hi, I have fitted a TCS FL4P-MH decoder into the dummy vehicle of my Bachmann 105. The directional lights only work if I press 1 on the controller for the white lights and 2 for the red lights. Is there any way I can change this to turn on and off with light button as with the powered vehicle and to automatically change with the direction the unit is travelling in. I am using dynamis controller. All the best, Richard. Link to post Share on other sites More sharing options...
Nigelcliffe Posted October 26, 2010 Share Posted October 26, 2010 TCS put decent manuals on their website: http://www.tcsdcc.com/Customer_Content/Literature/Literature.htm Try the first in the technical manuals list; function remapping. Link to post Share on other sites More sharing options...
gingertrainspotter Posted October 26, 2010 Author Share Posted October 26, 2010 Hi, thanks for the quick reply, but not being the cleverest person around the instructions have just managed to totally confuse me . If anyone could give me a step by step run through I would be a lot happier. All the best, Richard. Link to post Share on other sites More sharing options...
BromsMods Posted October 26, 2010 Share Posted October 26, 2010 See http://www.bromsgrovemodels.co.uk/BachmannCl108DCCInstr.htm - same principles Link to post Share on other sites More sharing options...
gingertrainspotter Posted October 27, 2010 Author Share Posted October 27, 2010 Hi, thanks for the info, I will give that a go later. Hopefully I wont blow anything up Link to post Share on other sites More sharing options...
gingertrainspotter Posted October 30, 2010 Author Share Posted October 30, 2010 Hi, thanks John for the link. All ok now. All the best, Richard. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.