Jump to content

Lancaster Green Ayre - Trains are running


Recommended Posts

27 minutes ago, Regularity said:

Obviously.

I mean, what kind of idiot would carry on looking for something after they had found it?

 

There is always that practical person who says:

"Try to remember where you last had it..."

The correct response to which is:

"If I knew where I last had it, I wouldn't have @#£&ing lost it!"

  • Like 1
  • Agree 4
Link to post
Share on other sites

The usual way to find something is to discover you need it, fail to find it then buy another. It then turns up whilst the new one is in the post.

 

Jamie

  • Agree 4
Link to post
Share on other sites

The badger incident doesn't sound nice. They are powerful creatures. Fortunately  the sanglier( wild boar) don't come near us and we very rarely see them when driving. We see more deer around. We do however have a variety of rodents, most are harmless but I don't want them nesting in my modelling room. Outside the whip snakes (harmless to us) and various airborne predators keep their numbers down. Owls, Buzzards and Hen Harriers that our neighbours call White Kites do a good control job. The Harriers are marvellous to watch as thet quarter the fields. When picking sloes, for gin production, we usually hear the buzzards mewing.  There are badgers and foxesx around as well.

 

Jamie

  • Like 4
Link to post
Share on other sites

We had wild boar issues where I lived in Provance. St Raphael. Very nice but lots of wild boars and even bears, not very large bears but bears nonetheless.  Extensive scrub and forests of Mediterranean pine along with vineyards and Olives. Big ants were also a bit of an issue, colonies would have big soldier ants guarding its flanks sending out large foraging parties. Most of the workers were about the same size of ants you find in Britain but they had big soldiers who were much bigger about 10 times the size of the workers. First time I saw them I thought the soldiers belonged to a different species but they were pointed outwards and moved with the workers I'd never seen soldier ants before I thought they were all the same size but if you look hard at ants here they do have soldiers as well but the size difference isn't so pronounced. In ants in around the med the queens are much bigger as well and the difference in types of ants is much more pronounced than in British ants. 

Regards Lez.      

  • Like 2
  • Informative/Useful 2
Link to post
Share on other sites
On 09/10/2020 at 06:36, jamie92208 said:

The usual way to find something is to discover you need it, fail to find it then buy another. It then turns up whilst the new one is in the post.

The other way this works is the replacement arrives, and you need to put it somewhere nice and obvious for just a short time until you're ready to do the task. And the obvious place is occupied. Of the original item you bought this to replace.

... Now why couldn't I find it first time?

  • Agree 5
  • Funny 1
Link to post
Share on other sites

A bit more work today and quite productive. I started by spending some time drilling out all the holes in the various levers and links to 0.85mm to take brass pins of which I have a stock.  Some of the links needed to be filed down at the ends to fit in the clevis's.   Then I spent nearly half an hour drilling out one of the valve glands o take the valve spindle.  This needed to be 1.4mm and I gradually opened it out using, and breaking (some) , a succession of drills.  At one point the little rascal of a casting pinged off into space and landed somewhere on a shelf of unbuilt kits with a broken drill in side it.   I managed to find it after 10 minutes at the bottom of a box with a part built 2F in it.  Anyway I then started a trial assembly of a valve linkage. This was the result.

PA110803_exposure.JPG.910be042ad1bb812295e24e3db512af4.JPG

The linkage is at the bottom with the bracket casting underneath the motion bracket. The errant gland is to the right on the valve spindle.   All this has to be fitted above the slide bars.  A problem emerged that with the narrow frames the slide bars are too close together for the links to fit between.  I now need to file the centre boss on the brass bracket casting to allow me to mount the valve linkages close together. I need to find at least 2mm. This photo shows the bracket a little more clearly.

PA110804.JPG.e45b3003f37487f07ac44053bb31ecd0.JPG

I was quite pleased with the progress and left it at that for the day.

 

I plan to get all the linkages made up and mounted before soldering the bracket to the motion bracket. I have also marked up the valve chest for mounting the glands.  It's almost starting to make sense and I've had some ideas about how to secure everything so that it can be taken out as a unit,

 

Jamie

 

  • Like 4
  • Craftsmanship/clever 8
  • Round of applause 1
Link to post
Share on other sites

I had a good session in the shed on Thursday evening.   I managed to assemble all the valve gear components.  The resultant dummy block looked like this.

PA160817.JPG.b5564d0454ea0511667acf5e6c14ab9c.JPG

There isn't much room between the slide bars and as you can see the nearest rocker arm won't go into place. This photo shows it a little better.

PA160818.JPG.9284b41746ef5a2227dd46b24777e019.JPG

The problem is the narrowness between the inner slidebars which shows in this picture from the underside

PA160819.JPG.f5445164e20edbe12bea85274f49c163.JPG

I need to fit the two rocker arms and the two push rods into that narrow space and at the moment there isn't enough room.   I'm back off to the shed shortly to do battle.  A file on the heads of the brass pins will get me some room and also I can take at least 0/5 mm off eacj of the inner slide bars.

 

Once more into the breach dear friends ere will fill the wall with English dead.

 

Jamie

 

  • Like 5
  • Craftsmanship/clever 2
Link to post
Share on other sites

Progressing well Jamie. Fettling the components so that it all lines up always takes a bit of time and effort. It'll all be worth it in the end mate.

Regards Lez.

  • Agree 1
Link to post
Share on other sites

Thanks Lez.  I've just had 2 hours over in the shed and think that I've created enough space for everything to move. The inner upper slidebars are now only half their normal thickness for the first 10mm and everything on that side of the motion bracket just fits and moves.  The clevis's that attach to the die block are now the problem as they are in conflict but I'll probably joggle them and then try and fit everything together.  Coffee time now.

 

Jamie

  • Like 1
Link to post
Share on other sites

Looking nice Jamie. With regards to things pinging off the desk, I have often considered laying very powerful magnet on my ceiling, a bit like like James May did in ManLab. But the again that would also make everything else stick to the ceiling I suppose. 
 

Douglas

Edited by Florence Locomotive Works
  • Like 2
Link to post
Share on other sites
5 hours ago, Florence Locomotive Works said:

Looking nice Jamie. With regards to things pinging off the desk, I have often considered laying very powerful magnet on my ceiling, a bit like like James may did in ManLab. But the again that would also make everything else stick to the ceiling I suppose. 
 

Douglas

 

 If I did that it would ensure that the only things pinging off would be non-ferrous.

 

Dave

  • Agree 2
  • Funny 2
Link to post
Share on other sites

Good evening.  The planets must have been in line tonight.  I've just spent an hour and a bit over in the shed and lo and behold most of the valve gear has gone into place. The valves even move.

PA190821.JPG.5b5875bc2276a7dabb065017ca76ea6b.JPG

The rocking levers are in place and I've even attached, loosely, the first die block and lifting link.  It needs a lot of cleaning up but I'm rather happy with this.

PA190820.JPG.45e917762f6df8db350546ba9d32f2bb.JPG

The apparent curve in the slidebars has been exaggerated by the lens .  

 

My plan is to keep this unit together and build the rest of the valve gear onto it.  I now need to get the unit installed in the frames and get them all straightened up.   However after several months of effort there is at last some light at the end of the tunnel.   It's probably a train coming the other way but things are moving.

 

Jamie

 

  • Like 2
  • Craftsmanship/clever 2
  • Friendly/supportive 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.