RMweb Gold Stubby47 Posted January 4, 2011 RMweb Gold Share Posted January 4, 2011 DonB, We found that the modules, being made of wood/ply (all except mine!) stayed pretty much static. The plan was to use cable ties, attached to hooks (simple cup hooks) on the ends of each module, under the 4" long bridges, once the modules were in place, to help keep them from moving apart. This would still seem to me to be the easiest solution - it depends on whether anyone has any better ideas. Jack, I agree that 6" would give enough room for point motors such as Tortoise. However, again from expeience at the YMR show, none of the additional track on the modules was used during the exhibition - my preference (and I stress the 'my') would be that each module only has twin tracks running through, with no additional pointwork. This makes the construction simpler (2 yards of Peco Code 100, a bit more if the module is longer...) and the rest is pure scenery. This might be a good time to get the O gauge module layout project up and running - you could bring them to the Taunton 2012 Meeting as well ! Stu Link to post Share on other sites More sharing options...
Jack Posted January 5, 2011 Share Posted January 5, 2011 I agree that 6" would give enough room for point motors such as Tortoise. However, again from expeience at the YMR show, none of the additional track on the modules was used during the exhibition - my preference (and I stress the 'my') would be that each module only has twin tracks running through, with no additional pointwork. This makes the construction simpler (2 yards of Peco Code 100, a bit more if the module is longer...) and the rest is pure scenery. Understandable, and i have seen a number of exhibtion layouts where goods yards arn't used because everyone is too busy racing trains around, but surely its better to set the standard so extra track work could be used if necessary? I would have thought it is better to allow for development at this stage, rather than have to modify things after people have started building modules. Just a thought ... This might be a good time to get the O gauge module layout project up and running - you could bring them to the Taunton 2012 Meeting as well ! Progress has been slow! However, plans are afoot. Plan A is for a meet in the summer at the main RMWeb shin dig. I have the boards sorted and a thread will be appearing shortly. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted January 5, 2011 RMweb Gold Share Posted January 5, 2011 Jack, You are quite right, it is easier to set things out now before we start. But, other than the Tortoise motor, there is little reason to add the extra 2" to the height. If the experience of the YMR show is anything to go by, then a point that moves as quick as possible would be prefered to a nice protoypical slow one ! There are also (obviously) several modules around which are built to the 4" height, some of which have been already promised for the 2012 meeting. It would be good to see an O gauge module project come to fruition - I can see lots of walking round with tape measures at Taunton in April and people claiming floor space for 2012 ! Cheers Stu Link to post Share on other sites More sharing options...
Tigger Posted January 6, 2011 Share Posted January 6, 2011 As there are only 16 months until the show I thought I better make a start on my module Note the aid to model railway constrution near the far end Not going to tell you where or what it is yet, but you can have a guess if you like Link to post Share on other sites More sharing options...
Penlan Posted January 7, 2011 Share Posted January 7, 2011 Tigger, may I suggest you have a short headshunt to the sidings rather than directly onto the main line, then you can have your own independent controller to play a little shunting game on your module whilst the main lines are running trains up and down through all the modules - between the two end fiddle yards, if the concept finalises similar to the YMR/Kernow modules set up. This will also allow you to use either a DC or DCC system on your bit, and if DCC, sound etc., with a changeover switch to the main lines power if you want to move something to/from the main line..... These are purely my observations, to perhaps think about and probably discard - it also helps me to formulate my own module when looking at others...... . My thinking at present is having the two '00' code 100 main lines and 'independent' sidings to the rear in 'EM', a loco and a few trucks chuntering about..... One of the YMR/Kernow modules had an underground train circulating within the modules 4" base height and I think there was something at a higher level too (Trams?), with the module main lines forming part of the race track from one end of all the modules to the other........ PS - Who's supplying the end fiddle yards? Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted January 7, 2011 RMweb Gold Share Posted January 7, 2011 Sandy, I've been discussing with Mike (Tigger) via PM about his module and his offer to build one of the fiddle yards..., covering the very points you've raised. So far, we have offers of modules from : Sidecar Racer (Mike) Penlan (Sandy) Tigger (Mike) Stubby (well, why not...) Mozzer (Brian) and probably Tim-Minay as it was all his idea in the first place. Please feel free to start your own module thread in the sub-forum. Can you each indicate how long your intended module is likely to be, so as to prepare the good Captain for the space the project will need ? And if any one else feels like joining in, please do. Stu Link to post Share on other sites More sharing options...
RMweb Premium Kris Posted January 7, 2011 RMweb Premium Share Posted January 7, 2011 Tigger, is the glass of wine some form of obscure water tower? Link to post Share on other sites More sharing options...
Penlan Posted January 7, 2011 Share Posted January 7, 2011 Tigger, is the glass of wine some form of obscure water tower? WATER !!! - Hopefully at least a 13% Oz Chardonney.. Presumably this will be on tap at the Swag 2012 dooooooooo..... Link to post Share on other sites More sharing options...
Tigger Posted January 7, 2011 Share Posted January 7, 2011 Thanks Penlan, some good ideas you gave there I like the head shunt idea so I can play on my own Tigger, is the glass of wine some form of obscure water tower? As to the "Water Tower" not quite prototypical but more fun. WATER !!! - Hopefully at least a 13% Oz Chardonney.. Presumably this will be on tap at the Swag 2012 dooooooooo..... I will arrange some "water tower" contents to be available at Swag 2012 for anyone who builds a module Link to post Share on other sites More sharing options...
Penlan Posted January 8, 2011 Share Posted January 8, 2011 Bearing in mind 'Code 100' is an align concept to me, is this a specific manufacturers Code 100 for the Modules, like say Peco or Hornby etc., - I only ask as there's a load of Hornby track being sold off in a Penzance shop, and from it's appearance looks to be course enough for 'Code 100' Link to post Share on other sites More sharing options...
RMweb Gold Re6/6 Posted January 14, 2011 RMweb Gold Share Posted January 14, 2011 Has anybody thought about designing in fixed Fremo style end pieces, so as to guarantee absolute accuracy when connecting it all together? Such end plates would also allow the individual boards to be connected together in various combinations (if required). This is one of the 'standard' European Fremo profile end boards which were used for the Hölle 'expandable' layout and were supplied to all participants. The holes are larger than the bolt size to allow for final alignment. These are actually laser cut, but that wouldn't be necessary for just a few for this project. Just one member to make them and distribute them to all. Your own profile (double track?)would of course be a matter of your own group design. Just a thought. John Link to post Share on other sites More sharing options...
RMweb Gold Ramblin Rich Posted January 14, 2011 RMweb Gold Share Posted January 14, 2011 That end plate is a nice idea. I've been wondering about joining in but my track record is poor (pun intended)! I assume that the modules are laid out on a string of normal tables - there's no mention of legs, height of board etc? Also - is the actual length an issue - would a module over 4ft long be allowable as it's only the width / track position that's crucial? (I don't have anything actually in mind, but over 4ft length might allow some gentle curves incorporated). Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted January 14, 2011 RMweb Gold Share Posted January 14, 2011 Rich, Yes, the modules are laid on tables - the challenge of everyone making lags the same height is probably too great, plus finding a height all would agree on..... So the module track is 4" off the table, nice and simple (if yopu wanted to add legs and fiddle yards to make your own module a standalone layout, you of course have that freedom too). No, length is not really an issue - the module idea is that each one is just one unit, and 4ft seems to be a good limit for physically man-handling and transporting. But if you want to make a longer one, no probs - we'll just need to add up all the planned lengths for CK so he can allocate enough room (s !). As for the Freemo end plates John, they are a great idea, and obviously work. The benefit of the 4" bridges is that the end of each module doesn't have to be 1000% accurate, in any dimension (track distances, height from the table, etc) - the bridges resolve the imperfections, which can happen when the modules either cannot be pre-tested together or the builder is not confident in meeting the stricter connecting standards. There is no reason why anyone, of any skill level, should feel intimidated by having to make a module to any perceived quaility of scenery or carpentry. Cheers Stu Link to post Share on other sites More sharing options...
RMweb Gold Re6/6 Posted January 14, 2011 RMweb Gold Share Posted January 14, 2011 For the best in Dutch Fremo have a look at this little beauty Look carefully and the individual module joins can be seen. This sort is more a fixed configuration type. Check out some of the huge Fremo layouts in the other utube sites at the side. Link to post Share on other sites More sharing options...
Penlan Posted January 14, 2011 Share Posted January 14, 2011 ....Yes, the modules are laid on tables ...... The benefit of the 4" bridges is that the end of each module doesn't have to be 1000% accurate, .... And of course most tables in village halls etc., have an ali edging strip that stands proud of the table top a little bit Link to post Share on other sites More sharing options...
RMweb Gold Ramblin Rich Posted January 14, 2011 RMweb Gold Share Posted January 14, 2011 And of course most tables in village halls etc., have an ali edging strip that stands proud of the table top a little bit Good point well made! How about using a styrofoam base - you could then just shave away any problem areas.... Link to post Share on other sites More sharing options...
Penlan Posted January 14, 2011 Share Posted January 14, 2011 .......(I don't have anything actually in mind, but over 4ft length might allow some gentle curves incorporated). I did ask what the min. radius was in an earlier posting just for such an eventuality - some nice curves - bearing in mind that the modules at YMR/Kernow Show seemed to have trains thundering along from end to end ASAP, unlike those nice gently moving trains on the Dutch Fremo layout. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted January 14, 2011 RMweb Gold Share Posted January 14, 2011 We can look at the suitability of the tables this April (provided they don't change them before 2012...) The Fremo modules were all open ended, so matching to the next one was less obvious. The YMR / Kernow modules were all individual, with back & side scenes. By making ours in the same way, it means the builder can have anything they want as a scenic backdrop and it doesn't look odd along side the next one. Link to post Share on other sites More sharing options...
mozzer models Posted January 27, 2011 Share Posted January 27, 2011 With the CRM OO & On30 modules the boards do not meet up but use a 4inch bridge track across the gap that way the module end boards can be any shape & if each member that has a module also has a bridge then there will always linkup Link to post Share on other sites More sharing options...
DonB Posted March 17, 2011 Share Posted March 17, 2011 Been following this with interest, I'm just a little puzzled (it's probably an age-induced thing!) about the connecting 4"bridges. You specify track ending 4" short of the each end of the module, then a 4" bridge. I assume then that the overall length of the connecting unit will be 12" ?? (2 x 4" plus a 4" gap to span), or have I mis-understood your intentions? Apologies for intruding into Swagonia without a valid Visa! Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted March 17, 2011 RMweb Gold Share Posted March 17, 2011 Hi Don, The track is to be at a height of 4" This is measured from the table the module rests on to the top edge of the rail. On the modules, the tracks will be to the edge of the module at each end, and then 4" bridges fit between the modules. Hope that makes more sense. Plus, you're welcome in SWAG anytime! Stu Link to post Share on other sites More sharing options...
LSWR Posted March 23, 2011 Share Posted March 23, 2011 Some practical advice from a module builder: Instead of inventing yet another "standard" why don't you steal from the very best? NMRA Module Standards I will be in the UK in April and will probably come to the Taunton gathering if anybody wants to discuss module construction. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted March 23, 2011 RMweb Gold Share Posted March 23, 2011 Hi LSWR, Thanks for the link to the NMRA module standards - they seem quite comprehensive ! However, what we are aiming at with this project is to continue to use the existing standards as used by the CRM group in Cheshire and the YMR group (worldwide, but with the first module layout displayed in Cornwall last year). This means that all the modules so built will be compatible together - the ideal scenario. Where these standards differ from the NRMA are : * in the need for legs (as different modellers have individual home set up requirements) * the need for exact dimension control (as not all modellers can make baseboards to the same critical standards) * complex connection criteria - so any module can link to any other * complex wiring What I'm hoping to do at this year's party is finalise all the necessary standards, so individuals can get involded knowing what they need to do, and decide the set up requirements for the organisers, so any practical advice on those aspects will be gratefully received. Cheers Stu Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted April 18, 2011 RMweb Gold Share Posted April 18, 2011 Ok folks, this is the official launch of the 2012 SWAG Module Project (SWAGMOP !) Standards for the modules can be found here The Good Captain will need to know how big the project is going to be by October this year, so no firm commitment is necessary at the moment, but it would be nice to get a feel for how many potential modules we may have. Please can you indicate in this thread if you are hoping to take part - for those certain, please start a new thread in the Modules sub-forum. Any questions ??? Stu ( & Mike (Tigger) & Mike (Sidecar Racer)) Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted March 7, 2012 RMweb Gold Share Posted March 7, 2012 Hi to everyone coming to the Captain's Party ! The module layout is going well, but we'll need stock to run. If you'd like to bring something to trundle up and down, please remember : Code 100 track, 00 gauge DC only Don't bring anything too delicate as there will be manhandling of stock involved Mark anything you bring - if 10 BWTs turn up you need to know which is yours ! Full size Eurostars probably won't fit in the fiddle yard - a GWR tank & B-set is probably a better option. Please let me know if you intend, or would like, to bring something to run, just so we get an idea of how much room we are likely to need around the fiddle yard. And if you're not bringing anything to run, please come and have a look at the modules too ! Stu Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.