RMweb Premium richierich Posted December 20, 2011 RMweb Premium Share Posted December 20, 2011 Does anyone know the issue of Traction magazine, where Nigel Burkin fitted a micro motor under DCC control to a Hornby Class 56 (in RF Coal) to power the radiator fans? I remember reading the article, but didn't buy that issue. If only i had! Thanks, Rich Link to post Share on other sites More sharing options...
Dicky W Posted January 25, 2012 Share Posted January 25, 2012 Rich Have found your earlier post in the RMWeb archive regarding this article - this was dated May 2008, so it should be around then I would think! I don't hold any Traction information any more as it was all passed on to the new editor Steve Rabone - he's on here so you could try sending him PM. Regards Richard Link to post Share on other sites More sharing options...
shortliner Posted January 25, 2012 Share Posted January 25, 2012 You could try an email to this address - It is his business http://www.nairnshire-modelling-supplies.co.uk/contact-us-ezp-15.html?zenid=hu4rbgrkqeeob87lvq40noiiv2 Link to post Share on other sites More sharing options...
Wummyock Posted January 29, 2012 Share Posted January 29, 2012 The article is in his book "Fine tuning and maintaining 00 gauge models" published by Crowood. HTH. Link to post Share on other sites More sharing options...
RMweb Premium richierich Posted January 29, 2012 Author RMweb Premium Share Posted January 29, 2012 Thanks for the information I'll have a look on Amazon for the book, and on Ebay for a back issue of Traction from May 2008. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.