CME and Bottlewasher Posted July 20, 2018 Share Posted July 20, 2018 (edited) Lucky fellows! Edited July 20, 2018 by CME and Bottlewasher Link to post Share on other sites More sharing options...
bgman Posted July 20, 2018 Share Posted July 20, 2018 Looks like a very enjoyable session Rod. Grahame p.s. Just make sure Martyn didn't do a bit of secret weathering on your loco's whilst you were busy eating the cakes ! Link to post Share on other sites More sharing options...
HSB Posted July 20, 2018 Author Share Posted July 20, 2018 Here's a picture I took in between being signalman and foreman shunter - Martyn at the controls while Rod and Vic look on. 9 Link to post Share on other sites More sharing options...
asa Posted July 20, 2018 Share Posted July 20, 2018 What a lovely way to spend a day Howard. Link to post Share on other sites More sharing options...
Weatherman Posted July 20, 2018 Share Posted July 20, 2018 Thanks to Rod and Howard it was a pleasure just to 'play trains' for a while and we were all given a most warm welcome by our hosts. We were also treated to some excellent home made cake when we paused between activities, which made the day even more special! Not sure about the bald old bloke in the striped T-shirt, although he does look vaguely familiar . . . Thanks again. Martyn 1 Link to post Share on other sites More sharing options...
CME and Bottlewasher Posted July 20, 2018 Share Posted July 20, 2018 (edited) They're lovely chaps, with a superb model railway, made my better half and me very welcome..... Edited July 20, 2018 by CME and Bottlewasher Link to post Share on other sites More sharing options...
rlwynut Posted July 21, 2018 Share Posted July 21, 2018 As I have said before and I will say it again. Superb looking layout Rod. Link to post Share on other sites More sharing options...
railwayrod Posted July 23, 2018 Share Posted July 23, 2018 Another great day at Ramchester. Howard turned up this afternoon along with his new loco which he wanted to give a run. This is a DB class V160 Bo-Bo diesel by Lenz which of course has all the gismos, sound, lights, even a "pop up" driver at each end. So Howard and I had a play with this and here are a few photos of it on the layout. Just in case you are thinking that you have seen this loco before - you have. I also have one of these and just to prove it I have included a photo of the pair of them standing in Ramchester. Hope you enjoy the pictures. The DB V160 leaves the fiddle yard.... and enters the station... coming to a halt at the buffer stops by the cattle dock... to be joined a few minutes later by its sister!!! Thank you for all your kind comments about the layout which are much appreciated. Don't forget that if you are planning to visit the Torbay area and would like to see the layout send me a PM and I will arrange a mutually convenient time. . Rod 7 Link to post Share on other sites More sharing options...
CME and Bottlewasher Posted July 23, 2018 Share Posted July 23, 2018 Loving the weathering on the livestock pens too, very subtle. Link to post Share on other sites More sharing options...
railwayrod Posted July 25, 2018 Share Posted July 25, 2018 Just one day after leaving the works at Jintymans where it had a major refit D2227 leaves the tunnel to trundle into Ramchester. It halts briefly for the signal and eases over the approach to the station. At the buffer stops the driver pops out for a quick chat with station master Wilson. It then commences its first shunting duties by picking up the open wagons in the siding. It then picks up the vans from the goods shed and puts them in the siding ready for departure on the afternoon freight. Following all this hard work (remember it has done nothing for several weeks) it retires to the loco spur where it is stationed for the night. Thanks David for your hard wok to turn my 04 into a proper model. Rod 14 Link to post Share on other sites More sharing options...
Andrew P Posted July 25, 2018 Share Posted July 25, 2018 (edited) Please tell me that's NOT a Model Rod, I saw it on Jint's workbench, and the weathering is so subtle, it fits in a treat on Ramchester. Edited July 26, 2018 by Andrew P 1 Link to post Share on other sites More sharing options...
CME and Bottlewasher Posted July 25, 2018 Share Posted July 25, 2018 Very nice! Link to post Share on other sites More sharing options...
muddys-blues Posted July 25, 2018 Share Posted July 25, 2018 That 04 has been to Jintymans for a refit, do they not have a wash facility at that works ? Look at it it’s filthy !!!! ;-) Very nice Rod, very nice indeed. Best regards Craig 1 Link to post Share on other sites More sharing options...
Andrew P Posted July 26, 2018 Share Posted July 26, 2018 That 04 has been to Jintymans for a refit, do they not have a wash facility at that works ? Look at it it’s filthy !!!! ;-) Very nice Rod, very nice indeed. Best regards Craig Came out dirtier than it went in. Link to post Share on other sites More sharing options...
Jintyman Posted July 26, 2018 Share Posted July 26, 2018 Came out dirtier than it went in. Maybe I should start washing them when I've finished. Intensive cycle on the dishwasher should do it!!!! Jinty Link to post Share on other sites More sharing options...
railwayrod Posted July 26, 2018 Share Posted July 26, 2018 David has done a fabulous job on the 04 in all respects. The problem seems to have been caused by the loco passing through severe dust storms on it way to Ramchester. The driver has promised that he will get a bucket of soapy water and a sponge to give it a bit of a clean but could not say when he would get the time!! Yes Andy it is a model and not photoshopped into a photo of Ramchester!!! Next loco? Wait and see!! Rod 3 Link to post Share on other sites More sharing options...
railwayrod Posted July 27, 2018 Share Posted July 27, 2018 (edited) This afternoon I decided to have a look through my many Bradford Barton railway books which as most of you will know are or were in black and white. These photo albums of the steam age are very striking and the pictures seem to capture the evocative nature of the early BR period. Thinking about this I got to wondering what some of my photos would look like in black and white so I had a play with them on my computer to see just how good my railway really is and how closely it matches the pictures in my books. Attached are some of the adapted pictures which I hope you will enjoy but in any case your comments would be appreciated. The photos have appeared on this thread before but I trust you will forgive me for my indulgence. First the most recent photos of the 04 diesel leaving the tunnel... and coming to a stand at Ramchester station. Next the 4F heading for the water tower. Jinty 47357 arriving at Ramchester with a freight. Another view of the Jinty. Having completed its shunting duties the Jinty waits for a local passenger train hauled by Fowler 4F 44360 before departing. My two Jinties standing by the water tower. Finally my unweathered German 2-10-0 class 50 standing in the yard I think that I am on the right track and I do feel rather pleased with the results of Howards and my efforts. More soon. Rod Edited July 27, 2018 by railwayrod 11 Link to post Share on other sites More sharing options...
81A Oldoak Posted July 27, 2018 Share Posted July 27, 2018 This afternoon I decided to have a look through my many Bradford Barton railway books which as most of you will know are or were in black and white. These photo albums of the steam age are very striking and the pictures seem to capture the evocative nature of the early BR period. Thinking about this I got to wondering what some of my photos would look like in black and white so I had a play with them on my computer to see just how good my railway really is and how closely it matches the pictures in my books. Attached are some of the adapted pictures which I hope you will enjoy but in any case your comments would be appreciated. The photos have appeared on this thread before but I trust you will forgive me for my indulgence. First the most recent photos of the 04 diesel leaving the tunnel... DSC02923 (3).JPG and coming to a stand at Ramchester station. DSC02925 (3).JPG Next the 4F heading for the water tower. DSC01569 (2).JPG Jinty 47357 arriving at Ramchester with a freight. DSC02347 (4).JPG Another view of the Jinty. DSC02285 (3).JPG Having completed its shunting duties the Jinty waits for a local passenger train hauled by Fowler 4F 44360 before departing. DSC02354 (3).JPG My two Jinties standing by the water tower. DSC02452 (3).JPG Finally my unweathered German 2-10-0 class 50 standing in the yard DSC02312 (3).JPG I think that I am on the right track and I do feel rather pleased with the results of Howards and my efforts. More soon. Rod Rod, They look good. Remember that colour photography is a modern trick invention and that the real world was indeed black-and-white in the 1950s and early sixties. Regards, Chris Link to post Share on other sites More sharing options...
Simond Posted July 27, 2018 Share Posted July 27, 2018 It’s out of my league, but I think you will have difficulty matching b/w images, because the colour response of your digital camera, and the subsequent conversion to b/w will not match the response of b/w film, which may have been more responsive to red or blue for example. I wonder if someone markets software that emulates old films... I like the pictures anyway! Best Simon Link to post Share on other sites More sharing options...
81A Oldoak Posted July 28, 2018 Share Posted July 28, 2018 Rod, I posted this in Cwm Bach in response to your kind remarks about my recent magazine articles, but perhaps it is time to give a Ramchester an outing in the paper press? It's a first class layout and in my opinion would provide much inspiration to others as it does to me. I would be very happy to help to compose an article and solicit the editors of the main titles, all of whom I know. Regards, Chris 4 Link to post Share on other sites More sharing options...
CME and Bottlewasher Posted July 28, 2018 Share Posted July 28, 2018 Rod, I posted this in Cwm Bach in response to your kind remarks about my recent magazine articles, but perhaps it is time to give a Ramchester an outing in the paper press? It's a first class layout and in my opinion would provide much inspiration to others as it does to me. I would be very happy to help to compose an article and solicit the editors of the main titles, all of whom I know. Regards, Chris I agree Chris, I've seen Rod & Howard's work in the Gazette, yet a wider audience would appreciate such greatly, I'm sure. I've written a few articles too - yet bow to your greater experience and range of contacts - yet Rod, if I can help, then you only have to ask. Kindest regards, Martin. 1 Link to post Share on other sites More sharing options...
railwayrod Posted July 28, 2018 Share Posted July 28, 2018 Hello Chris. Thank you for your kind words about Ramchester and for your offer of help. As it happens there is already an article in an advanced stage of planning which just needs me to find time to complete. I have invited one of the editors from Seaton to come and have a look and I guess it will not be too long before he appears. On a different note are you going to be at Telford next month as it would be nice to have a chat with you and to see what goodies Minerva are planning. Thanks again for your kind offer which I will take up if I get stuck. Finally I notice that this will be the 1,999th reply on the Ramchester thread so whoever replies next will have the dubious honour of being the 2,000th. Rod 2 Link to post Share on other sites More sharing options...
CME and Bottlewasher Posted July 28, 2018 Share Posted July 28, 2018 (edited) I'm sure that RM will help you make a nice job of the article, Steve, Craig et al. are nice fellows. Edited July 28, 2018 by CME and Bottlewasher Link to post Share on other sites More sharing options...
81A Oldoak Posted July 29, 2018 Share Posted July 29, 2018 Hello Chris. Thank you for your kind words about Ramchester and for your offer of help. As it happens there is already an article in an advanced stage of planning which just needs me to find time to complete. I have invited one of the editors from Seaton to come and have a look and I guess it will not be too long before he appears. On a different note are you going to be at Telford next month as it would be nice to have a chat with you and to see what goodies Minerva are planning. Thanks again for your kind offer which I will take up if I get stuck. Finally I notice that this will be the 1,999th reply on the Ramchester thread so whoever replies next will have the dubious honour of being the 2,000th. Rod Rod, That is excellent news. I have always liked the Railway Modeller to which I have subscribed continuously since early 1971. I think it strikes the right balance between narrative text and illustrations thus avoiding the tabloid feel of some of its competitors. I especially like the continuing contributions from enthusiasts rather than a dominance of staff writers and, of course, the advertising tops and tails the editorial rather than interrupting it. My first article was published in the November 1992 edition. I will be at Telford on Saturday on the Minerva stand and hope to see you and Howard there. Regards, Chris 1 Link to post Share on other sites More sharing options...
CME and Bottlewasher Posted July 29, 2018 Share Posted July 29, 2018 Well said Chris, well put! Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now