Winchat Posted August 9, 2020 Share Posted August 9, 2020 Unable to tell whether they have spoked or 3 hole disk wheels. Maybe Dr Who can tell us. Kind regards Geoff 3 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post queensquare Posted August 9, 2020 Author RMweb Gold Popular Post Share Posted August 9, 2020 8 hours ago, Winchat said: Unable to tell whether they have spoked or 3 hole disk wheels. Maybe Dr Who can tell us. Kind regards Geoff I mentioned on zoom yesterday, as I was putting the wheels in, that I had run out of spoked wheels and that about 30% of these have disc wheels - in fact quite a number of my wagons have disc wheels in. Shocking I know but I must admit I rarely notice and nobody else ever does and I find them much more reliable than spoked ones. The second picture here is the one from the latest MRJ and I cant say in all honesty what wheels those wagons have got. There is no doubt that spoked wheels look better where appropriate and I shall continue to buy them but I have a small stash of disc wheels which I will use - its a compromise I'm prepared to live with. Jerry 26 4 1 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted August 9, 2020 RMweb Gold Share Posted August 9, 2020 I am with you on this Jerry. When a boy we were living aross the Thames from the GWR main line and I used to see long freights on the slow lines. I never noticed whether wheels were spoked or disc. In this scale the effect of that long train is what grabs you something not often modelled or given room to run. That picture takes me back to seeing such long trains headed up to London Don 3 Link to post Share on other sites More sharing options...
richbrummitt Posted August 10, 2020 Share Posted August 10, 2020 On 09/08/2020 at 11:49, queensquare said: I mentioned on zoom yesterday, as I was putting the wheels in, that I had run out of spoked wheels and that about 30% of these have disc wheels - in fact quite a number of my wagons have disc wheels in. Shocking I know but I must admit I rarely notice and nobody else ever does and I find them much more reliable than spoked ones. The second picture here is the one from the latest MRJ and I cant say in all honesty what wheels... I could tell you the wagons without zooming in but it is not clear for the brake van. 2 1 1 Link to post Share on other sites More sharing options...
Sithlord75 Posted August 10, 2020 Share Posted August 10, 2020 11 hours ago, richbrummitt said: I could tell you the wagons without zooming in but it is not clear for the brake van. I'm with Richard! But well done anyway... Link to post Share on other sites More sharing options...
Coal Tank Posted August 11, 2020 Share Posted August 11, 2020 On 23/04/2020 at 10:28, queensquare said: My good friend John Aldrick kindly volunteered to paint my c.1922 Manchester Diner (later Pines). He has done a fantastic job though they are currently on lockdown with him in Leeds though they have been out for a run on his Ivybridge layout - albeit with a funny green engine on the front! I have one blue engine ready and another waiting to be painted - seen along with the coaches before they went to John. I have a couple of Nigel Hunt's 483 kits in stock so that I can build some matching red engines but they have to wait for all the stuff that's almost finished to pass through the paint shop first - discipline Clifford, discipline!! Jerry Hi are there any photos of the rest of this layout John 6 Link to post Share on other sites More sharing options...
2mm Andy Posted August 11, 2020 Share Posted August 11, 2020 33 minutes ago, Coal Tank said: Hi are there any photos of the rest of this layout John John, There are a few more photos here; Andy 1 Link to post Share on other sites More sharing options...
Coal Tank Posted August 11, 2020 Share Posted August 11, 2020 Hi Andy thank you. I haven't seen any pictures of the station area John Link to post Share on other sites More sharing options...
RMweb Gold Popular Post queensquare Posted August 16, 2020 Author RMweb Gold Popular Post Share Posted August 16, 2020 A disapointing evenings football saw a return to the batch of SDJR 20T brake vans. The chassis are done and with only handrails and roof details to go the time is looming when I will have to make some couplings - or start another batch build! Jerry 22 4 1 Link to post Share on other sites More sharing options...
lambiedg Posted August 17, 2020 Share Posted August 17, 2020 Or..... batch build some couplings! 2 Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted August 17, 2020 Author RMweb Gold Share Posted August 17, 2020 45 minutes ago, lambiedg said: Or..... batch build some couplings! ..... and people have commented that building loads of PO wagons is dull your'e right of course, at some point I shall have to bite the bullet and build a load of couplings. I have another train planned for the autumn before then though! Jerry 2 1 Link to post Share on other sites More sharing options...
RMweb Gold 2mmMark Posted August 17, 2020 RMweb Gold Share Posted August 17, 2020 1 hour ago, lambiedg said: Or..... batch build some couplings! It's the best way to build them! mark 2 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted August 17, 2020 RMweb Premium Share Posted August 17, 2020 1 hour ago, 2mmMark said: It's the best way to build them! mark One fret at a time is enough for me - and that's in 4mm scale! 1 Link to post Share on other sites More sharing options...
Sithlord75 Posted August 18, 2020 Share Posted August 18, 2020 I do my couplings in pairs... 2 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post queensquare Posted August 23, 2020 Author RMweb Gold Popular Post Share Posted August 23, 2020 Body work detailing on the SDJR brake vans is now pretty much complete. Rainstrips are 36swg wire soldered on, photographs show some vans had split strips as well as single ones so I've done the same for variety. The oil lamp tops are Ultima castings and the vents are the heads of Peco track pins. The handrails are .3mm wire glued on the surface which, when painted and lightly dry brushed I find to be perfectly acceptable visually in 2mm scale. End steps are 10thou plasticard glued on with cyano - it's much easier to glue on big bits and trim them after than try and manipulate tiny little steps. Jerry 24 1 16 Link to post Share on other sites More sharing options...
richard i Posted August 24, 2020 Share Posted August 24, 2020 Nice family photo, and you managed to get them all smiling and looking at the camera. Never manage that with mine. One will always be shown up doing something silly. richard 1 1 2 Link to post Share on other sites More sharing options...
garethashenden Posted August 24, 2020 Share Posted August 24, 2020 What do you use to trim the steps that doesn't break them off in the process? Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted August 24, 2020 Author RMweb Gold Share Posted August 24, 2020 1 hour ago, garethashenden said: What do you use to trim the steps that doesn't break them off in the process? A sharp little set of side cutters. The steps wont break off, the glue joint is remarkably strong. The bottom pair and third pair up sit on the ledge in the framing, the second pair and top one fit in a little nick cut into the outside framing not unlike a crude housing joint, all of which results in a descent surface area for the joint. Jerry 6 1 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post queensquare Posted August 29, 2020 Author RMweb Gold Popular Post Share Posted August 29, 2020 I had the camera out in the workshop yesterday and set up this picture of the lockdown PO train. They still need couplings (and weathering and removable loads) but I've decided a batch of couplings can wait for those long winter evenings in the front room. Building a complete train does take a bit of determination but is very gratifying when it reaches this stage and, for a large project like Bath, is a sensible way to go. I shall continue the policy, I have two or three options in mind for a winter project. Jerry 34 5 3 1 Link to post Share on other sites More sharing options...
RMweb Gold Oldddudders Posted August 29, 2020 RMweb Gold Share Posted August 29, 2020 And lest anyone think there is some phototrickery in use here, I can say I have had a glimpse of these vehicles in their natural lair. This is the real deal. 1 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted August 29, 2020 RMweb Gold Share Posted August 29, 2020 It will be worth all the effort when you see them running, It must have saved a lot of time over building them all individually. Don 1 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted August 29, 2020 RMweb Premium Share Posted August 29, 2020 5 hours ago, queensquare said: I had the camera out in the workshop yesterday and set up this picture of the lockdown PO train. They still need couplings (and weathering and removable loads) but I've decided a batch of couplings can wait for those long winter evenings in the front room. Building a complete train does take a bit of determination but is very gratifying when it reaches this stage and, for a large project like Bath, is a sensible way to go. I shall continue the policy, I have two or three options in mind for a winter project. Jerry I take my hat off to you Jerry. Building things in batches of three works for me. Batches of twenty-eight - no thanks. 1 2 1 Link to post Share on other sites More sharing options...
RMweb Gold TomE Posted August 30, 2020 RMweb Gold Share Posted August 30, 2020 Super work Jerry! Will look spectacular snaking over the viaduct. Tom. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted August 30, 2020 Author RMweb Gold Share Posted August 30, 2020 16 hours ago, St Enodoc said: I take my hat off to you Jerry. Building things in batches of three works for me. Batches of twenty-eight - no thanks. If I had to do it as my day job then I would agree, it would drive me gaga - batches of three or four is more than enough but for things like this, on my little card-table bench in the front room of an evening it works well spread over a few months. Wagons generally I would do in small batches as most freights are made up of a seemingly random assortment but coal trains just require lots of coal wagons and I was keen to do some appropriate to the area. I could easily justify many more in at least half a dozen more local liveries to be fully representative but it may be a while before I feel the urge to do more! My thoughts for winter projects are for a couple of passenger trains which, again, will be done in batches although thankfully, in my period, locals are usually only three or four coaches long and even through trains are rarely more than six to eight in length. I think that there is a philosophical element to this as well in that in 2mm we tend to focus more on modelling trains rather than individual items - or is that just me!! Jerry 2 1 1 Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted September 18, 2020 Author RMweb Gold Share Posted September 18, 2020 I posted a picture over on my Foxcote/Highbury thread of a Spitfire swooping over the colliery to mark Battle of Britain day. I mused how it might be fun to have an appropriate plane to be able to suspend above the layout on occasions. The grainy newspaper picture below has always amused me with its 'navigational aid' painted on top of one of the gas holders! For orientation, Bath Junction and the S&D sidings are lower left. On the layout the gasworks will sadly be predominantly low relief and 2D on the backscene I have limited knowledge of aircraft but want the sort of thing that amateur pilots would have been buzzing around in in the 1920s. I've ordered a couple of 1:144 plastic kits of WW1 aircraft on the assumption that, like lorries, they were sold off after the war as army surplus - or at least similar aircraft produced for civilian use. Any further information, particularly pictures, would be welcome. Jerry 6 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now