RMweb Premium Popular Post newbryford Posted January 25, 2020 Author RMweb Premium Popular Post Share Posted January 25, 2020 (edited) I've been busy with my Accurascale PCAs. The graffiti is copied from real life examples on the PCAs. VTG safety "eggs" courtesy of Railtec. Debut at Stafford next week on a Kings Cross-Clitheroe working. Cheers, Mick Edited January 25, 2020 by newbryford 12 1 1 10 Link to post Share on other sites More sharing options...
RMweb Gold Andy7 Posted January 25, 2020 RMweb Gold Share Posted January 25, 2020 Great work Mick. I was wondering if you would have done the same one I did. 4 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted January 25, 2020 Author RMweb Premium Share Posted January 25, 2020 2 hours ago, Andy7 said: Great work Mick. I was wondering if you would have done the same one I did. Yep - I still have another half dozen graffiti pics. Plan is to have a total of 8 out of the 18 tagged. Cheers, Mick 1 Link to post Share on other sites More sharing options...
Steadfast Posted January 25, 2020 Share Posted January 25, 2020 Lovely work on the PCAs Mick (and Andy!), I notice the graffiti people who did these haven't used the trick the local ones here do now to stop it getting removed, they put masking tape over the numbers and operating information! Some Autoballasters have even had the door numbers sprayed back in over the graffiti. Fair dos having the patience to hand paint that. The VTG egg decals have come up well, they set the models off nicely. Jo 1 1 1 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted January 25, 2020 Author RMweb Premium Share Posted January 25, 2020 5 minutes ago, Steadfast said: Lovely work on the PCAs Mick (and Andy!), I notice the graffiti people who did these haven't used the trick the local ones here do now to stop it getting removed, they put masking tape over the numbers and operating information! Some Autoballasters have even had the door numbers sprayed back in over the graffiti. Fair dos having the patience to hand paint that. The VTG egg decals have come up well, they set the models off nicely. Jo All the PCAs I've seen don't have any visible numbers or operating panles - they simply spray over them. Most of the US graffiti seems to have the operating marks/numbers visible as though they have been "protected" as you describe, during tagging. And thanks again for the help with the egg stickers. 1 Link to post Share on other sites More sharing options...
7APT7 Posted January 25, 2020 Share Posted January 25, 2020 On 18/01/2020 at 21:25, Merfyn Jones said: 9806 a couple of weeks back. Llanrwst. Hi Merfyn Jones & newbryford Have these been seen on the Chester to Holyhead line then if so, are there set times they run. Also What does the BUO Acronym stand for...? For the Blue Coach above if at all, it is a BUO Coach. Those are like hens teeth to come across on the move to. For Mick, I think it was you Mick doh! (If it wasn't) !Sorry! but I saw on one of your posts recently, and I've tried to find it since of the Network Yellow 97301 TopnTail sitting at Llandudno Station, I've been on the hunt for 97301 up this way for ages if not donkey's haha! I know it's not one for being up this way often due to the ERTMS system (is it...Hmmm) but I have to say it was a great photo, again of your's, is that been a regular runner of late, if so what time period, it was a night time photo so either running late evening or middle of the night, I'd drive out to catch it myself, if I knew [When / Times], if you know when it will be running this way on the Holyhead line... then please do drop me a PM if you could, it would be much appreciated very much. I take it you must either work for them Mick or a Driver for them (You lucky thing, you haha) as your photos are always great to look at and always of the unseen or unusual things that run on the Rail Network, or you hunt for them, which what I tend to so lol... Your Modelling is on an other lever to, but that is for other comments to leave on what you are modelling and adapting/modifying that I see often I guess this is the best thread to catch those item on hey lol (You are going to tell me now that 97301 is on page 32 of this thread now aren't you haha Take care... Regards Jamie 1 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted January 25, 2020 Author RMweb Premium Share Posted January 25, 2020 5 minutes ago, 7APT7 said: Hi Merfyn Jones & newbryford Have these been seen on the Chester to Holyhead line then if so, are there set times they run. Also What does the BUO Acronym stand for...? For the Blue Coach above if at all, it is a BUO Coach. Those are like hens teeth to come across on the move to. For Mick, I think it was you Mick doh! (If it wasn't) !Sorry! but I saw on one of your posts recently, and I've tried to find it since of the Network Yellow 97301 TopnTail sitting at Llandudno Station, I've been on the hunt for 97301 up this way for ages if not donkey's haha! I know it's not one for being up this way often due to the ERTMS system (is it...Hmmm) but I have to say it was a great photo, again of your's, is that been a regular runner of late, if so what time period, it was a night time photo so either running late evening or middle of the night, I'd drive out to catch it myself, if I knew [When / Times], if you know when it will be running this way on the Holyhead line... then please do drop me a PM if you could, it would be much appreciated very much. I take it you must either work for them Mick or a Driver for them (You lucky thing, you haha) as your photos are always great to look at and always of the unseen or unusual things that run on the Rail Network, or you hunt for them, which what I tend to so lol... Your Modelling is on an other lever to, but that is for other comments to leave on what you are modelling and adapting/modifying that I see often I guess this is the best thread to catch those item on hey lol (You are going to tell me now that 97301 is on page 32 of this thread now aren't you haha Take care... Regards Jamie Hi Jamie, I don't work for the railway, but have a few friends that do...... Go to flickr.com and search 97301 Llandudno and lots of pics pop up. BUO is brake unclassified open. Cheers, Mick 1 Link to post Share on other sites More sharing options...
RMweb Gold big jim Posted January 25, 2020 RMweb Gold Share Posted January 25, 2020 7APT7: the photo your thinking of is one of mine on Flickr, it’s in the accurascale 97301 thread It’s not a particularly regular loco on the coast, to be honest it’s not used much on IM trains compared to others, it doesn’t go down the Cambrian either as it has an uncertified ERTMS system (Hitachi), I think it may be On the brink of being repainted/refurbished at the moment 4 1 Link to post Share on other sites More sharing options...
7APT7 Posted January 25, 2020 Share Posted January 25, 2020 (edited) 1 hour ago, big jim said: 7APT7: the photo your thinking of is one of mine on Flickr, it’s in the accurascale 97301 thread It’s not a particularly regular loco on the coast, to be honest it’s not used much on IM trains compared to others, it doesn’t go down the Cambrian either as it has an uncertified ERTMS system (Hitachi), I think it may be On the brink of being repainted/refurbished at the moment Oh Man... its only BigJim, might have known it was you buddy lol how am ya kid... And Yes that is where I did see the your photo haha... and Yes I have it on Order to, you wouldn't think so would you...!?! haha So... swiftly moving on.... when is it next up North Wales way BigJim.... any idea's... I believe the ERTMS is only in place up to or just outside Llandudno Junction near Colwyn Bay or so I believe it was to the middle of 2019 or is that another system I'm referring to (It wouldnt surprise me lol) as I can be and often known to be wrong and on many occasions wrong, and we don't need comments on that please lol haha Sorry newbryford to lol Gosh, why god, WHY! It's a good job we can all laugh about it... Plank, that is me by the way... the PLANK, and a Two Carrot Plonker! Regards Jamie Edited January 25, 2020 by 7APT7 Link to post Share on other sites More sharing options...
Steadfast Posted January 25, 2020 Share Posted January 25, 2020 4 hours ago, newbryford said: All the PCAs I've seen don't have any visible numbers or operating panles - they simply spray over them. Most of the US graffiti seems to have the operating marks/numbers visible as though they have been "protected" as you describe, during tagging. Makes life easier for you! Some of the BCC PCAs operating round here with Colas have rather heavy graffiti cover, but also have large numbers high up so duplicates still need renumbering! Grrr Jo Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted January 27, 2020 Author RMweb Premium Share Posted January 27, 2020 (edited) Thanks for the diversion guys, but getting back to my workbench...... All 18 suitably weathered/graffitied. A dummy tail lamp has been fitted to one of the rake for now - I will investigate fitting a working one later noting that the axles supplied with the PCAs are already live to one wheel....... Just a couple of little paint touch-ups to do and they're ready for a debut at Stafford next week. Motive power will most likely be 66711 or 66718 - both have worked with the PCAs. Although- with a fair wind, there may be another GBRf contender for use........... (fingers crossed) Cheers, Mick Edited January 27, 2020 by newbryford 9 7 Link to post Share on other sites More sharing options...
Steadfast Posted January 27, 2020 Share Posted January 27, 2020 More cracking work Mick. Boser is a local one round here, so guessing that one was done at Avonmouth. The Mendip stuff is heavily done by Boser and the rest of the Severnside gang so you get to know the common tags. Have you got any HTAs planned? Some of those are full bodyside jobs. Jo 1 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted January 27, 2020 Author RMweb Premium Share Posted January 27, 2020 (edited) 3 hours ago, Steadfast said: More cracking work Mick. Boser is a local one round here, so guessing that one was done at Avonmouth. The Mendip stuff is heavily done by Boser and the rest of the Severnside gang so you get to know the common tags. Have you got any HTAs planned? Some of those are full bodyside jobs. Jo No immediate plans to do HTAs (never say never!) - I need to tag some of my HRA fleet first. Then the next wagon sets to be done will either be my MBA or IOA rake. Cheers, Mick Edited January 27, 2020 by newbryford 1 Link to post Share on other sites More sharing options...
cal.n Posted January 27, 2020 Share Posted January 27, 2020 (edited) 10 hours ago, newbryford said: Thanks for the diversion guys, but getting back to my workbench...... All 18 suitably weathered/graffitied. A dummy tail lamp has been fitted to one of the rake for now - I will investigate fitting a working one later noting that the axles supplied with the PCAs are already live to one wheel....... Just a couple of little paint touch-ups to do and they're ready for a debut at Stafford next week. Motive power will most likely be 66711 or 66718 - both have worked with the PCAs. Although- with a fair wind, there may be another GBRf contender for use........... (fingers crossed) Cheers, Mick Brilliant weathering Mick, they do very much look the part. Looking forward to having a play at Stafford. Edited January 27, 2020 by cal.n 1 1 1 Link to post Share on other sites More sharing options...
Departmental203 Posted January 29, 2020 Share Posted January 29, 2020 The weathering (and the graffiti!) look absolutely fantastic, good work Mick! Jules 1 1 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted April 12, 2020 Author RMweb Premium Share Posted April 12, 2020 Three more PCAs (to make up the rake to 21) have found their weathered way through the chaos that is my workbench. Two will be tagged shortly. 12 4 Link to post Share on other sites More sharing options...
westie7 Posted April 16, 2020 Share Posted April 16, 2020 Wow, the weathering and graffiti on the PCAs is spot on, I just don't have the balls to tackle mine yet 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Phil Mc Posted April 17, 2020 RMweb Premium Share Posted April 17, 2020 9 hours ago, westie7 said: Wow, the weathering and graffiti on the PCAs is spot on, I just don't have the balls to tackle mine yet You’d be better off using a brush...... cheers, Phil. 11 Link to post Share on other sites More sharing options...
bradfordbuffer Posted April 17, 2020 Share Posted April 17, 2020 15 hours ago, Phil Mc said: You’d be better off using a brush...... cheers, Phil. Only you would think of that......rusty bottom! 1 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted April 25, 2020 Author RMweb Premium Share Posted April 25, 2020 The final three (yeah right) PCAs. The prototype pic is on flickr somewhere. Inspired by this photo - taken by Cal N of this parish after I couldn't get to it in time. I've been experimenting with couplings to reduce the gap with the supplied T/Ls. Hence the Kadees on 2 of them As they run as fixed rake, I'm awaiting a set of Hunt magnetic couplings to arrive. I've tried them on my 2 HST sets and they seem to do the job. Next (last?) job with the PCAs is to fit a flashing tail lamp to one of them. I know they come apart as I watched one roll off the Accurascale stand at Glasgow last year and revert to "major components"..... The wheels are already live to one side, so I'll probably use DCC Concepts axle springs and then fit wipers to the insulated side. The quick and easy way would be to reverse one wheel set, but I'm not keen on only one axle pickup. Cheers, Mick 8 8 Link to post Share on other sites More sharing options...
RMweb Gold Andy7 Posted April 26, 2020 RMweb Gold Share Posted April 26, 2020 Great job Mick. I fitted the exact same flashing tail lamp setup, easy to get apart. Also I run mine with the supplied 3 links and I’ve not had one derailment on Badgers Cross with its helixes. Think the spring buffers help. Also look fab with such a small gap between them. 2 Link to post Share on other sites More sharing options...
bradfordbuffer Posted April 26, 2020 Share Posted April 26, 2020 12 hours ago, newbryford said: The final three (yeah right) PCAs. The prototype pic is on flickr somewhere. Inspired by this photo - taken by Cal N of this parish after I couldn't get to it in time. I've been experimenting with couplings to reduce the gap with the supplied T/Ls. Hence the Kadees on 2 of them As they run as fixed rake, I'm awaiting a set of Hunt magnetic couplings to arrive. I've tried them on my 2 HST sets and they seem to do the job. Next (last?) job with the PCAs is to fit a flashing tail lamp to one of them. I know they come apart as I watched one roll off the Accurascale stand at Glasgow last year and revert to "major components"..... The wheels are already live to one side, so I'll probably use DCC Concepts axle springs and then fit wipers to the insulated side. The quick and easy way would be to reverse one wheel set, but I'm not keen on only one axle pickup. Cheers, Mick Model a bit to close to match real wagon.! Are you sure your not a 12 inch to foot tagger....I'm calling BTP see it! Snitch it! Sort it !on..0854123123 Fantastic wagon made more individual...can't wait to see rake trundle round DL 1 3 Link to post Share on other sites More sharing options...
RMweb Gold Robert Shrives Posted April 26, 2020 RMweb Gold Share Posted April 26, 2020 Good modelling, getting to grips with graffiti must be challenging - I use decals . I recall a case in Bristol where some Parcels stock got a good repaint job - the individual was caught and the police reported he had model railway vehicles done as a trial - these appeared at his trail ! Mental health issues quoted but cannot recall out come, Bristol is still a total mess with almost every inch painted - I guess it stops rusting but that is the only good thing to say about it. 61016 !! Robert Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted April 26, 2020 Author RMweb Premium Share Posted April 26, 2020 37 minutes ago, Andy7 said: Great job Mick. I fitted the exact same flashing tail lamp setup, easy to get apart. Also I run mine with the supplied 3 links and I’ve not had one derailment on Badgers Cross with its helixes. Think the spring buffers help. Also look fab with such a small gap between them. 3 links are great but a PITA to put on/take off at exhibitions. Especially with the amount of stock that's on DL. Link to post Share on other sites More sharing options...
RMweb Gold Andy7 Posted April 26, 2020 RMweb Gold Share Posted April 26, 2020 1 hour ago, newbryford said: 3 links are great but a PITA to put on/take off at exhibitions. Especially with the amount of stock that's on DL. That’s a good point Mick. I’m always thinking home layout. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now