Jol Wilkinson Posted October 9, 2016 Share Posted October 9, 2016 I believe that the ranges that PPP took over weren't all well organised and documented. That's not uncommon and even a very successful product range can take some time to get back into production. For example Brassmasters have had to put a lot of effort into getting the 4mm Finney range back on the shelf. PPP have probably overstretched themselves in terms of capacity, given that they already have a busy paint business and quite a lot of the kits (NNK range?) apparently needed new instructions The Sharman Wheels issue is something different, the production process, etc. being well beyond it's Best Before date and needing a fair size investment to bring it up to date, although as a small, part time/retirement activity it is probably a viable "hobby" business. Link to post Share on other sites More sharing options...
RMweb Gold ikcdab Posted May 4, 2021 RMweb Gold Share Posted May 4, 2021 Solely on the strength of the recommendation in this thread, I have ordered one of these DMR Z class kits. Do the instructions tell you what wheels to get? Wikipedia tells me 4' 8" I am looking at the AG website and they have several at 4' 7.5" (which I guess is the same) but lots of variations on spokes and cranks. Though the AG ones seem to be mostly GW rather than southern. Other wheel suppliers seem to be much more costly or have a poor reputation for fulfilling orders. What wheels do I need to get?? Thanks Link to post Share on other sites More sharing options...
Barclay Posted May 4, 2021 Share Posted May 4, 2021 1 hour ago, ikcdab said: Solely on the strength of the recommendation in this thread, I have ordered one of these DMR Z class kits. Do the instructions tell you what wheels to get? Wikipedia tells me 4' 8" I am looking at the AG website and they have several at 4' 7.5" (which I guess is the same) but lots of variations on spokes and cranks. Though the AG ones seem to be mostly GW rather than southern. Other wheel suppliers seem to be much more costly or have a poor reputation for fulfilling orders. What wheels do I need to get?? Thanks According to the 7mm drawing in the preview issue of Rail Model Digest they are 14 spoke, crank between spokes. Crank throw appears to be between 13" and 14". Link to post Share on other sites More sharing options...
RMweb Gold ikcdab Posted May 4, 2021 RMweb Gold Share Posted May 4, 2021 3 hours ago, Barclay said: According to the 7mm drawing in the preview issue of Rail Model Digest they are 14 spoke, crank between spokes. Crank throw appears to be between 13" and 14". Thank you. I saw that irwell press have a book about the class. I've just ordered it... Link to post Share on other sites More sharing options...
RMweb Gold ikcdab Posted May 28, 2021 RMweb Gold Share Posted May 28, 2021 On 02/08/2012 at 14:02, Metropolitan said: If you can't put one of these chassis together you might as well give up any hope of kitbuilding a loco. All the valve gear holes are etched out to the correct size. Simply remove the rods from the fret, insert a rivet, tap it and that's job done!! Make up up the valve gear and the brackets and fit them to the frames. Simple as that. No filing, fiddling, fettling or tearing your hair out necessary. I have one small bone to pick with the designer which looses the kit a mark! The valve rod bracket is in my opinion unnecessarily complex. It consists of five parts which have to be soldered together and, being very small, it's not easy. I can see no reason why the bracket could not be etched as just one part with fold up lines??? Still, this is (even though I say it myself) a sensational chassis. Smooth with great low running to match any new RTR. It's run in and now ready for a final clean up and a bit of filling where the wheel weights are not quite right. which gearbox is this? Thanks Link to post Share on other sites More sharing options...
RMweb Premium DLT Posted May 29, 2021 RMweb Premium Share Posted May 29, 2021 2 hours ago, ikcdab said: which gearbox is this? Thanks Looks like a Highlevel Roadrunner-Plus to me Link to post Share on other sites More sharing options...
RMweb Gold ikcdab Posted May 30, 2022 RMweb Gold Share Posted May 30, 2022 I'm now building the kit. I have a problem with the valve rod and bracket... See Anyone help? Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now