RMweb Premium PMP Posted August 15, 2019 RMweb Premium Share Posted August 15, 2019 Alan Whitehouse’s Hallam Town in 2FS makes very effective use of Metcalfe retaining walls, but they’re not straight out of the pack, they’ve got ‘added modelling’ applied which makes so much difference, whatever the scale or product. 14 3 Link to post Share on other sites More sharing options...
Tony Wright Posted August 16, 2019 Author Share Posted August 16, 2019 7 hours ago, thegreenhowards said: I’ll look forward to that. Three volumes sounds like a serious piece of work - should do the class justice! Are you still planning another blue diesel book? Andy Thanks Andy, With 410 locos to feature, three volumes will be a minimum. The idea is to have at least one picture of every B1 featured. The plan is not to include all the engine record cards (that's been done in Yeadon), but to highlight the myriad detail variations in appearance, and comment on the workings. I hope it'll be of use to modellers. We'll see, though it won't be a case of 'stuff the critics!' Another blue diesel book? Most of my own transparencies have been used now; the latest are going into another bookazine on the 'Deltics', to be published soon by Irwell, where every individual loco is featured, throughout its life. The non-steam Irwell bookazines have proved to be very popular, and (would you believe it?) one on DMUs (principally compiled by Robert Carroll) is in the pipeline. A number of others are in preparation, where I assist in their compilation, with the remainder of any of my own pictures used, as appropriate. I think it's a sign of the times. Those who really remember main line BR steam are dying off. Perhaps not as quickly, or early, as some previous generations, but I'm already nearly three years over my allotted Biblical span! With a 'dying' market, comes a 'dying-off' of book/magazine sales for it. Not only that, the authors are dying-off, too! When I took pictures of 'Deltics' in the '70s, at places like Doncaster, York and Darlington there were still throngs of 'spotters. 40+ years on, are these part of the generation who now buy the diesel/electric bookazines? One hopes they won't quite be dying - yet! I think I'd better get cracking with the B1 books! Regards, Tony. 3 1 Link to post Share on other sites More sharing options...
westerner Posted August 16, 2019 Share Posted August 16, 2019 Why wouldn't you believe there would be a 'bookazine ' on DMUs? 1 Link to post Share on other sites More sharing options...
Tony Wright Posted August 16, 2019 Author Share Posted August 16, 2019 7 hours ago, Clive Mortimore said: Hello Tony I model for myself. I like to share with others what I have built, OK what I am building because I never finish anything. If I inspire someone then wonderful. If I make someone laugh at my pile of junk, that's not a problem because I have enjoyed what I have done. I never think "I have to build it this way and include this to please Mr Critic". Stuff him, I am the one who has had the fun bodging it. Having said that for my own personal satisfaction I try to get things correct and to the best of my abilities. I don't think anyone noticed the right design of Western Region fuel pump as seen on my layout Pig Lane (Western Region) at Alley Pally or my point levers were facing the right way (so many layouts have them facing as to put the chap pulling them in danger), I know they are right, but right only for me. '" I never think I have to build it this way and include this to please Mr Critic". Stuff him, I am the one who has had the fun bodging it.' Good morning Clive, A delightfully-Cavalier approach to commentators and modelling indeed! I must admit, it took me ages to find your layout, Pig Lane, at Ally Pally. So much so that I hardly had a chance to get stuffed! I didn't expect it to be so small. The 'uninformed' critic, the him or her who is blissfully ignorant of what one is trying to achieve, and doesn't really care, deserves to be stuffed, especially if he/she displays that ignorance with banal criticisms. But 'ignorance' is not always a pejorative term. I'm ignorant of trillions of things. I'm also ignorant of many things regarding railways and model railways. With that last statement in mind, when I visit a show, read an article or see something railway-/model railway-related on line, I hope I can learn from it. But, I'll only learn anything of value if what I'm looking at is 'accurate' and 'right'. I think this is where you and I might differ (not that I say you don't strive to get things 'right'). It's been my privilege to make a living out of railways/model railways for over a quarter of a century now. When I make something, write about it, take pictures of it or write about something railway-related, it's surely my responsibility to 'please' more than just myself, isn't it? If I demonstrate at a show, or act as a tutor or a speaker, if I just said 'Get stuffed!' to all observers if they don't like/get what I'm doing, because I do get it (and that's enough for me), then surely I'd have failed? I say again, those who 'criticise' just for the sake of it, and have no viable, alternative point of view, can really get stuffed as far as I'm concerned (preferably with a pineapple!), but there are many who want to know, and improve their own modelling. Should we then be more responsible about it than just saying 'It suits me, and that's enough?' Take what's below as an example, if I may? I don't know if this is the 30th or 31st (or 32nd, or................) DJH A1 I've built. I've built at least half of those for myself, and this is one more. In the past, I've written about how I've built them and I've built many for customers. Thus, there are more souls to please than just myself (aren't there?). It's important to me (as your diesel models are important to you) that I make it as 'accurate' as I can (accepting that it's built in 'narrow gauge'). That 'accuracy' will include the fact that it's a roller-bearing example (round keeps to the tender and Cartazzi axleboxes, and a single mechanical lubricator), will still retain electric lighting and will be fitted with a Dia. 118 boiler. As such it'll be finished as 60157 GREAT EASTERN. Different from many of the other LB A1s. I suppose I could have said 'Stuff it, I can't be bothered with the fag of altering the axleboxes, nor installing all that fiddly wiring up to the top of the smokebox, because who's going to know, or care? Romping around LB, who'd notice? Well, I would, and I'll bet many other would, too. Please keep on entertaining us with your 'bodging', and ensure you've got plenty of Paxo to hand! Regards, Tony. 5 Link to post Share on other sites More sharing options...
Tony Wright Posted August 16, 2019 Author Share Posted August 16, 2019 15 minutes ago, westerner said: Why wouldn't you believe there would be a 'bookazine ' on DMUs? Speaking personally, Alan, I never took any notice of them as a 'spotter. They were just 'powered' carriages - large, articulated buses on rails! Regards, Tony. 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted August 16, 2019 RMweb Premium Share Posted August 16, 2019 1 hour ago, Tony Wright said: '" I never think I have to build it this way and include this to please Mr Critic". Stuff him, I am the one who has had the fun bodging it.' Good morning Clive, A delightfully-Cavalier approach to commentators and modelling indeed! I must admit, it took me ages to find your layout, Pig Lane, at Ally Pally. So much so that I hardly had a chance to get stuffed! I didn't expect it to be so small. The 'uninformed' critic, the him or her who is blissfully ignorant of what one is trying to achieve, and doesn't really care, deserves to be stuffed, especially if he/she displays that ignorance with banal criticisms. But 'ignorance' is not always a pejorative term. I'm ignorant of trillions of things. I'm also ignorant of many things regarding railways and model railways. With that last statement in mind, when I visit a show, read an article or see something railway-/model railway-related on line, I hope I can learn from it. But, I'll only learn anything of value if what I'm looking at is 'accurate' and 'right'. I think this is where you and I might differ (not that I say you don't strive to get things 'right'). It's been my privilege to make a living out of railways/model railways for over a quarter of a century now. When I make something, write about it, take pictures of it or write about something railway-related, it's surely my responsibility to 'please' more than just myself, isn't it? If I demonstrate at a show, or act as a tutor or a speaker, if I just said 'Get stuffed!' to all observers if they don't like/get what I'm doing, because I do get it (and that's enough for me), then surely I'd have failed? I say again, those who 'criticise' just for the sake of it, and have no viable, alternative point of view, can really get stuffed as far as I'm concerned (preferably with a pineapple!), but there are many who want to know, and improve their own modelling. Should we then be more responsible about it than just saying 'It suits me, and that's enough?' Take what's below as an example, if I may? I don't know if this is the 30th or 31st (or 32nd, or................) DJH A1 I've built. I've built at least half of those for myself, and this is one more. In the past, I've written about how I've built them and I've built many for customers. Thus, there are more souls to please than just myself (aren't there?). It's important to me (as your diesel models are important to you) that I make it as 'accurate' as I can (accepting that it's built in 'narrow gauge'). That 'accuracy' will include the fact that it's a roller-bearing example (round keeps to the tender and Cartazzi axleboxes, and a single mechanical lubricator), will still retain electric lighting and will be fitted with a Dia. 118 boiler. As such it'll be finished as 60157 GREAT EASTERN. Different from many of the other LB A1s. I suppose I could have said 'Stuff it, I can't be bothered with the fag of altering the axleboxes, nor installing all that fiddly wiring up to the top of the smokebox, because who's going to know, or care? Romping around LB, who'd notice? Well, I would, and I'll bet many other would, too. Please keep on entertaining us with your 'bodging', and ensure you've got plenty of Paxo to hand! Regards, Tony. Hello Tony I think I can tell Mr Critic where to go because I am modelling for me. Now should I be building for others, or writing about model railways for a living then I might have to change my view. Being prepared to tell someone to park their comments were the sun doesn't shine does mean I have to step back when I see someone make a nice model but it is wrong. I try to make them aware what the prototype was like without coming across as saying you made that incorrectly. Very hard to do, so most of the time it is best to keep my mouth shut. Not bowing down to the critics doesn't mean I wouldn't change an RTR or kit loco so that it had the correct features of that loco during the period I model, so yes Great Eastern with roller bearings, electric lights, riveted tender etc would be how I would model it. Now if I wasn't so committed to my 1960s modelling I may have gone for a time period when Great Eastern and her shed mates looked their best. 1 1 1 Link to post Share on other sites More sharing options...
cctransuk Posted August 16, 2019 Share Posted August 16, 2019 2 hours ago, Tony Wright said: Speaking personally, Alan, I never took any notice of them as a 'spotter. They were just 'powered' carriages - large, articulated buses on rails! Regards, Tony. Pretty much my attitude, too, Tony - until the last few days. The recent weather, combined with the absence of certain essential modelling components, prompted me to tidy up my digital railway photo collection. The big 'don't go there' section was the DMUs; nearly all images were labelled UNIDENTIFIED_xxx.jpg !!! So I decided to try and identify as many images as possible; relying largely on https://www.railcar.co.uk/ . As, to my mind, the TOPS designations are inappropriate for the first generation DMUs that predated that system, I used the official BR Diagram numbers to classify the images. I was astonished to find the variety of types which existed; the Derby Lightweights, for instance, comprised an entire family; rather than the small number of largely identical vehicles that I'd hitherto imagined. It is true that certain variants take a lot of close inspection to differentiate between, and I had to reject quite a few front-profile and platform-side views. (If you think that the B1s are a diverse subject, try DMUs). Nonetheless, I am suceeding in bringing some order to the previous chaos, and I have learned an immense amount about a fascinating subject. ...... oh, and I have the distinct beginnings of RSI in my right shoulder, as a consequence of excessive mouse usage. Regards, John Isherwood. 5 Link to post Share on other sites More sharing options...
grahame Posted August 16, 2019 Share Posted August 16, 2019 34 minutes ago, Clive Mortimore said: I think I can tell Mr Critic where to go because I am modelling for me. Now should I be building for others, or writing about model railways for a living then I might have to change my view. Being prepared to tell someone to park their comments were the sun doesn't shine does mean I have to step back when I see someone make a nice model but it is wrong. I try to make them aware what the prototype was like without coming across as saying you made that incorrectly. Very hard to do, so most of the time it is best to keep my mouth shut. Without wanting to be antagonistic or controversial, that does come across as a bit of you're happy to tell Mr Critic where to go but you are also happy to critique others modelling on occasion, or at least make them aware of variances with the prototype, although perhaps in a more considerate fashion. I certainly don't like rudeness in critical appraisal and approach and overt criticism can destroy confidence. But would you be happy to receive a more considerate and less aggressive feedback about your modelling when it is on public display (either at an exhibition or published on forums or magazines)? G 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted August 16, 2019 RMweb Premium Share Posted August 16, 2019 (edited) 1 hour ago, grahame said: Without wanting to be antagonistic or controversial, that does come across as a bit of you're happy to tell Mr Critic where to go but you are also happy to critique others modelling on occasion, or at least make them aware of variances with the prototype, although perhaps in a more considerate fashion. I certainly don't like rudeness in critical appraisal and approach and overt criticism can destroy confidence. But would you be happy to receive a more considerate and less aggressive feedback about your modelling when it is on public display (either at an exhibition or published on forums or magazines)? G Hi Grahame There is a big difference between critisum and advice. When someone says you should go DCC or don't use tension lock couplings I feel I have the right to say, I am doing what I want to. When some says are you aware that loco 7890 had xyz on its roof and I haven't modelled it as such, then I will reappraise my bodge and amend. Hopefully if I say are you aware that loco 7890 had xyz on its roof it will help someone. Even more so if I have done the research and modelled loco 7890 to back up what I am saying. If I am asked a direct question then I can be honest and say, you have made loco 7890 wrong and where it is wrong. Likewise should I ask someone have I made 7890 right and I haven't then I cannot say to the person I questioned "stuff you I am building it how I want to." As for be criticised when displaying ones wears in public, if you have attempted to make the model as accurate within your own abilities additional information should be helpful. Outright "you should have done it that way or this way" is not. With my first Pig Lane I had some Airfix Esso tank wagons, they were that old the transfers just fell apart. So I used some Fox ones which were the wrong size and a later design, as a compromise. I was under the baseboards fixing something....which is a justifiable criticism....when I heard a chap mention the Esso badges. My mate politely said to the chap, " I'm sure if they are wrong, Clive knows they are". Edited August 16, 2019 by Clive Mortimore 5 Link to post Share on other sites More sharing options...
grahame Posted August 16, 2019 Share Posted August 16, 2019 3 minutes ago, Clive Mortimore said: There is a big difference between critisum and advice. When someone says you should go DCC or don't use tension lock couplings I feel I have the right to say, I am doing what I want to. When some says are you aware that loco 7890 had xyz on its roof and I haven't modelled it as such, then I will reappraise my bodge and amend. To me both criticism and advice is 'feedback' but it is the manner in which it is given that is often the big distinction and can be a breaking point. It could be considered critical to say "you are wrong in missing xyz of the roof of loco 7890" especially if voiced in a damning and unpleasant way. But it seems like if the information is presented as helpful 'advice' then you are happy to amend your model. Which is great as that's the way I prefer it. G 1 4 Link to post Share on other sites More sharing options...
stewartingram Posted August 16, 2019 Share Posted August 16, 2019 On 12/07/2019 at 23:34, Woodcock29 said: Re: Bec J17 The kit in thegreenhowards' post above appears to be the later Bec version as a very close look at the photo appears to indicate it has the correct spectacle shape and the cab roof was more correct on this later version. (Edit: your latest photo posted whilst I was writing my post does indeed show it to be the later Bec version) I rebuilt the earlier Bec version back in the 80s. My father had originally built it in the early 60s before we left the UK. I did at that time continue to use a Triang chassis albeit now fitted with Romfords and eventually a Buhler/Ultrascale motor/gearbox. I also fitted a better chimney and more correct diameter smokebox door. A couple of years ago I was given a box of badly built kit locos which included a Bec J17 but the later version I think - can't check as I'm currently on holiday. I've been thinking about rebuilding this at some stage but as Tony often says one spends a lot of extra time rebuilding something someone else has botched! And there are too many other priorities at present. Maybe the best option for a correct chassis would be to ask PDK as they do what appears to be the old Crownline brass J17 and I know they do sell separate parts as I've had chimneys and domes from them. The chassis maybe in a separate etch of its own? Andrew Going back to this post about the Bec J17 - was it really nearly 40 pages ago! - a replacement J17 chimney and dome are mentioned. Anyone know where these could be obtained? I've found a lost wax dome on Precision Paints website (£8 + postage!), but can't find mention of either anywhere else. Comparing them with the GERS drawing it looks like I shall need replacements. Thanks to Tony, I have obtained a chassis from SEF, a nice easy kit which is nearly finished. Stewart Link to post Share on other sites More sharing options...
Woodcock29 Posted August 16, 2019 Share Posted August 16, 2019 Try PDK as I got replacement chimneys and domes from them sometime ago. Actually I need to get more GC stuff from them soon. Andrew 1 Link to post Share on other sites More sharing options...
RMweb Gold scottystitch Posted August 16, 2019 RMweb Gold Share Posted August 16, 2019 1 hour ago, grahame said: To me both criticism and advice is 'feedback' but it is the manner in which it is given that is often the big distinction and can be a breaking point. It could be considered critical to say "you are wrong in missing xyz of the roof of loco 7890" especially if voiced in a damning and unpleasant way. But it seems like if the information is presented as helpful 'advice' then you are happy to amend your model. Which is great as that's the way I prefer it. G I think the most important part of the "feedback" is in the follow up. It's how the "critic" responds to the modeller's reply. If someone were to inform or suggest that my particular number of Standard 2MT had a late crest and not an early emblem by the time my layout is set (just for example), my reply might be a) Thanks for letting me know, I'll take it under consideration; b) Thanks, I know, I just haven't gotten around to changing it; or c) Thanks but I'm happy with it as it is, because it's just representative and not a 100% accurate layout - some 2MTs DID have early emblems and I'm just going for a flavour of the time. The response to all three options should be, to my mind, words to the effect of "fair enough". Certainly nothing derogatory. 3 Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted August 16, 2019 RMweb Gold Share Posted August 16, 2019 Here's the SE&CR E1 with only a few small details left to be added: I found the photos in the Maidment book invaluable for reworking the pipework and associated details on this side. The DJH casting for the "thing" on the footplate didn't bear much resemblance to the photos but I was able to cut and file it into a better approximation. Is it a Westinghouse apparatus, or a steam reverser? Not sure! I've only added about half the associated piping but what's there is fairly correct, I think. Next I will add lamp irons, then begin final filling and sanding in preparation for painting. There are some white metal guard irons to be added but I'll either leave them to later, or replace with brass ones as I suspect they may be vulnerable. I am also unsure about that projection above the whistles. 9 3 Link to post Share on other sites More sharing options...
RMweb Premium Chamby Posted August 16, 2019 RMweb Premium Share Posted August 16, 2019 4 hours ago, cctransuk said: ...... oh, and I have the distinct beginnings of RSI in my right shoulder, as a consequence of excessive mouse usage. John, can I recommend that you try a trackball mouse? The sort that you just rest your hand on and spin a red ball with your fingers to move the cursor... so much better if you’re experiencing RSI. 1 Link to post Share on other sites More sharing options...
RMweb Premium PMP Posted August 16, 2019 RMweb Premium Share Posted August 16, 2019 ^^ and look at chair/desk height to minimise angle of dangle issues! 1 Link to post Share on other sites More sharing options...
RMweb Gold Barry Ten Posted August 16, 2019 RMweb Gold Share Posted August 16, 2019 I think that how criticism is taken also depends on the perceived authority of the critic. I took some locos along to the Bristol Show to show Tony. He mentioned that the cab plates on my prairie didn't have the correct GWR font (even though they'd come with the kit) so - although it was a pain - I took Tony's advice and replaced the plates, luckily managing to dislodge the old ones without taking half the cabside paintwork with them. The model's now better for it. I'd take the opinions of most of the regulars on Wright Writes seriously because the majority of correspondents are practical modellers, all with different interests and approaches, but united by a desire not to be entirely reliant on the RTR trade. If (hypothetically) Clive were to comment on something I'd shown, I'd pay attention because I know Clive's put in the graft with his modelling even if our interests aren't quite aligned. I think we're all man enough to take a bit of robust commentary, in the interests of improving our models and abilities. Where it can wound, I suppose, is where a model's beyond the point where much can be done about the mistakes. In that case, I think, a tactful acknowledgement of the errors is all that can be expected. Elsewhere on RMweb, there are a lot of contributors who rarely show any modelling but are willing to waffle and pontificate on every topic under the sun. I'm afraid I treat their opinions much less seriously than those of the practical modellers who frequent Wright Writes. 4 8 Link to post Share on other sites More sharing options...
RMweb Premium t-b-g Posted August 16, 2019 RMweb Premium Share Posted August 16, 2019 Perhaps we should only publish photos of our models and exhibit layouts that we know are perfect. How many exhibitions, magazines or web pages would there to be left to look at? Approximately none. I am usually well aware of any shortcomings in my modelling. I am my own worst critic by far. There are often bits of work that I do that are close to being right. So close that to spend several more hours to make a tiny difference isn't time well spent. So I know my modelling is less than perfect. Always has been. Always will be! I really don't need somebody else telling me, however constructively, where I fell short of perfection! All I can ever say is that I did my best. I see a huge gap between solicited and unsolicited comment. If I do something and I am not sure if it is OK, I will ask a friend or find a tame expert and ask them. Should this be in those colours at that date? Would the loco have had a new chimney by now? Is the weathering a bit overdone? I certainly don't attend a show or look at photos and immediately get the urge, no matter how constructively, to say "I think that perhaps you might have got that bit wrong". I have been known to ask somebody what information they based their model on as I haven't seen a photo of one in that condition but if they answer that they just built it as supplied in the kit, I will leave it at that. If somebody is happy to build a model that way, I don't see it as my job to try to inflict my ideas of improvement on them whether they want it or not. If they have enjoyed building it, are happy with the way it turned out and aren't looking for suggestions as to how it might be improved, that is all that matters to them and it is none of my business if I think that they might have done better. One time I was exhibiting a layout and a good friend was watching it. He said "Would you mind if I made a comment about your coal wagons?". He had noticed that I was running 1923 RCH wagons on a pre WW1 layout. He didn't know that I had borrowed the wagons as I was building correct ones from kits and hadn't finished them in time for the show. But it was, in my view, the perfect approach. He didn't just dive in and tell me that they were wrong, however constructively. He found out if I was open to constructive comment first. Since that day, I always do the same. I always ask first and never make an assumption that anybody wants to know what is wrong with what they have done. 8 1 Link to post Share on other sites More sharing options...
lanchester Posted August 16, 2019 Share Posted August 16, 2019 23 hours ago, Clive Mortimore said: Hi Dave You are right that using a commercial brick paper or even embossed plastic card most modellers do not model the queen closers. Conversely, how many people notice what type of brick course the building is made of. I say this because I extended a building width wise, the front is Flemish bond and the rear is stretcher bond. Only because I didn't have any Flemish bond embossed plastic card at the time. No one ever commented on the types of brickwork. People did look closely as I had scratchbuilt the interior, including the sausages and chips Doris has on the hot plate. Clive - having the 'public facing' wall or walls in something reasonably classy like Flemish bond, and the back walls in something cheaper like stretcher, or English Garden, is actually normal; almost the rule. Similarly, front/street faces in 'Accrington brick' (the glossy terracotta-ish stuff) and other walls in commons. Anyone building a netty or similar in Flemish Bond had more money than sense. A problem thing to model well is, I suspect, the diaper effect obtained by using the dark 'burnt ends' of bricks to make patterns (often diamonds). I think the North Staffordshire was particularly fond of this effect in its station buildings, but doubtless there were others.Obviously it has to be tailored to the features of a particular wall, working round windows and scaled for length and so on, so a generic paper is unlikely to fit the bill. 1 1 Link to post Share on other sites More sharing options...
2750Papyrus Posted August 16, 2019 Share Posted August 16, 2019 The phrase used to be "Queen Anne front, Mary Ann back". 3 Link to post Share on other sites More sharing options...
RMweb Premium jamie92208 Posted August 16, 2019 RMweb Premium Share Posted August 16, 2019 9 minutes ago, lanchester said: Clive - having the 'public facing' wall or walls in something reasonably classy like Flemish bond, and the back walls in something cheaper like stretcher, or IEnglish Garden, is actually normal; almost the rule. Similarly, front/street faces in 'Accrington brick' (the glossy terracotta-ish stuff) and other walls in commons. Anyone building a netty or similar in Flemish Bond had more money than sense. A problem thing to model well is, I suspect, the diaper effect obtained by using the dark 'burnt ends' of bricks to make patterns (often diamonds). I think the North Staffordshire was particularly fond of this effect in its station buildings, but doubtless there were others.Obviously it has to be tailored to the features of a particular wall, working round windows and scaled for length and so on, so a generic paper is unlikely to fit the bill. I have modelled the Stationmasters House on Green Ayre. This turned out to be a Georgian building that had been a foundry managers house. The photos from the front showed regular dressed stone on the sides facing the main road and the station approach. When I found photos of the other two sides they were in brick. I ended up making the structure from 3mm ply, laser cut and then used scribed plasticard for the formal stonework and Das for the brickwork that I scribed when dry. From further research another Georgian building just up the road was built the same way with dressed stone on the road side and regular building stone on the other walls. The corner stones are DAS, moulded damp, all copied from photos. That's the east wall that faced the station approach and the north wall which overlooked the foundry yard that became railway stables. Jamie 6 3 Link to post Share on other sites More sharing options...
rowanj Posted August 16, 2019 Share Posted August 16, 2019 (edited) Anyone who exposes their work to the public should expect criticism. When it's uninformed, then it has no value other than to the ego of the critic. Criticism in its' purist form is intended to convey both the positive and negative aspects of the work in question. In our more cynical times- another vice which has become a virtue- it seems to mainly refer to the negative. I am happy to take advice, but am less interested in someone's opinion, unless it is factually based. So feel free to say what you like about my almost complete Dave Alexander N10, which I'm building in parallel with ArthurK's version. Doing this has allowed me to upgrade what is a pretty basic kit by Dave Alexander (but a pleasure to build, for all that), I spent a bit of time on the cab interior, and though it's far from perfect, it now looks suitably "busy". I must find a fireman..... As an aside, I'd tried Crystal Glaze in the past without total success. For this kit, where the cab windows are pretty small. I used Wilko Interior Wood Glue, and it worked fine. I'm sure other brands are available..... The twin builds can be found at the link below. Edited August 16, 2019 by rowanj Added info 11 1 Link to post Share on other sites More sharing options...
cctransuk Posted August 16, 2019 Share Posted August 16, 2019 2 hours ago, PMP said: ^^ and look at chair/desk height to minimise angle of dangle issues! Thanks both. My mouse, desk and chair usually suit me fine - it was a definite over-indulgence in mouse / keyboard work that caused the problem, which has responded to anti-inflamatory medication. Regards, John Isherwood. 2 Link to post Share on other sites More sharing options...
MikeTrice Posted August 16, 2019 Share Posted August 16, 2019 I had that once and even resorted to one of the "natural" position mice. In the end I started using the mouse in my other hand. It did not take long to learn how to use it and rested the wrist that had the problem. 1 Link to post Share on other sites More sharing options...
robertcwp Posted August 16, 2019 Share Posted August 16, 2019 (edited) 12 hours ago, cctransuk said: I was astonished to find the variety of types which existed; the Derby Lightweights, for instance, comprised an entire family; rather than the small number of largely identical vehicles that I'd hitherto imagined. DMUs are not boring once you start looking. Early DLW - non-standard engines and transmission. 2-car power twin, note absence of lower centre marker light: Derby-LW_nrLeedsCentral by Robert Carroll, on Flickr West Cumberland set - retaining large window next to van doors, internal bar across front windows: Derby-LW_forKeswick by Robert Carroll, on Flickr Later 2-car set with larger van area (there was an intermediate step in the van size evolution too) and divided front windows: M79177-M79467_Preston_13-5-67 by Robert Carroll, on Flickr 4-car set - note that there were no types in common with the 2-car: DLW_8-Car_Waskerley_10-4-65 by Robert Carroll, on Flickr Single unit and a motor composite from a later (yellow diamond) 2-car power-twin - note that even the two single cars were different - this one has a small window next to the van area: M79190_M79901_Oxford_28-11-65 by Robert Carroll, on Flickr The other single car in later life - this had a larger window next to the van area: Iris_Shenfield_1981 by Robert Carroll, on Flickr Then, of course, there were all the livery variations. Commendably, Bachmann has made both the West Cumberland and later versions of the 2-car power-trailer. Edited August 16, 2019 by robertcwp 10 2 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now