RMweb Premium Mark C Posted September 3, 2020 RMweb Premium Share Posted September 3, 2020 More tracks (ouch!):- - Calling (at) All Stations - Genesis - Life in the Fast Line (Lane) - Eagles - At the Station - Joe Walsh ...I'll get my coat... 3 Link to post Share on other sites More sharing options...
APOLLO Posted September 3, 2020 Share Posted September 3, 2020 (edited) For good beer with a railway theme, if you ever find yourself at Wigan North Western with a thirst and time to spare try the Wigan Central pub, located in the arches under the station, a nice selection of local brews also (brewery is across the road). Just turn left out of the station, under the bridge and sharp left. Don't worry about missing your train they have a station info TV screen at the bar. Would make a nice model with the Wills kit !! https://www.wigancentral.bar/on-the-bar.html Across the road directly opposite North Western is the newly refurbished Swan & Railway hotel. Also a real ale pub. The owners spent a fortune just before the covid lockdown forced then to shut one week after re-opening. A lot of railway artifacts around the bar. The name is interesting. Once there was a pub each side of the old bridge, The Swan, And The Railway. When the LNWR rebuilt the station both pubs were demolished, the new one was named after both of the old ones. I miss the "pre covid" pub atmosphere - pain in the bum now going to the local, the Boars Head, also at the side of the WCML. Brit15 Edited September 3, 2020 by APOLLO info added 4 4 Link to post Share on other sites More sharing options...
LNER4479 Posted September 3, 2020 Share Posted September 3, 2020 2 hours ago, dibateg said: Desert island reading - The entire set of Viz annuals? Not required - 'Victorian Dad' Tony can recite them by heart ... 2 9 Link to post Share on other sites More sharing options...
RMweb Premium PMP Posted September 3, 2020 RMweb Premium Share Posted September 3, 2020 4 hours ago, Tony Wright said: Observers will note the front steps sticking out a bit. Even on 3' radius curves, they caught the pony wheels. Modification is called for. You’re probably aware Andrew at comet models has a variety of etched steps suitable for LMS and BR classes. Theres possibly something there that’ll give an easy, robust and accurate fix giving a bit more clearance. 1 Link to post Share on other sites More sharing options...
Jesse Sim Posted September 3, 2020 Share Posted September 3, 2020 4 hours ago, Tony Wright said: Thanks Grahame, Yes, I was approached about two/three months ago if I'd be interested in answering some questions (not all related to railway modelling). I think folk who have made a living from and/or are well known in the hobby have been approached for the feature. It's a privilege to be a participant. One amusing question related to what two items I'd request if I were marooned on a desert island. You'll have to read Model Rail to find out my pair. Other questions related to films, literature and music. Regards, Tony. I dunno about anyone else, but I’d ask for a boat and a bacon and egg roll with BBQ sauce 1 8 Link to post Share on other sites More sharing options...
Woodcock29 Posted September 4, 2020 Share Posted September 4, 2020 4 hours ago, Theakerr said: In a recent post the DJH motor gearbox is referenced. It is an excellent combination and I have used more than a few in my locos. However, and this is information for the ex-pats on the thread, I have probably purchased my last unit from them. 60 pounds UK after GST taken off, 35 pounds shipping. Shipping UK products can be very expensive and it is worth asking what the shipping cost is before committing. Some companies seen to be able to get reasonable rates others ? I purchased three of the smaller units a couple of months ago. Was only going to buy two but when I found out the shipping cost to Oz I decided to spread the cost so bought three. I fitted one into a Craftsman C12 that will be used on an exhibition layout. It had a Mashima/Comet combination but was struggling with that - no idea why. It runs like a dream now. Another is in a D3 I've started to build. Only wish I'd bought half a a dozen or more! Might get more when I'm in the UK next - whenever that might be given current circumstances? I think the reason the DJH shipping costs is so high is that they used a courier service. Andrew 1 2 Link to post Share on other sites More sharing options...
RMweb Premium St Enodoc Posted September 4, 2020 RMweb Premium Share Posted September 4, 2020 45 minutes ago, Woodcock29 said: I purchased three of the smaller units a couple of months ago. Was only going to buy two but when I found out the shipping cost to Oz I decided to spread the cost so bought three. I fitted one into a Craftsman C12 that will be used on an exhibition layout. It had a Mashima/Comet combination but was struggling with that - no idea why. It runs like a dream now. Another is in a D3 I've started to build. Only wish I'd bought half a a dozen or more! Might get more when I'm in the UK next - whenever that might be given current circumstances? I think the reason the DJH shipping costs is so high is that they used a courier service. Andrew You could phone a friend and either ask them to order on your behalf and post them on or order for delivery to their address then post them on. A few years ago I ordered quite a lot of SMP track and had it delivered to one of my daughters, as shipping it direct is exorbitant because of its length. On my next trip to Sussex I bought a cheap sports bag and brought the track home in my checked baggage. When I went into the shop to buy the bag the girl asked me what colour I wanted. I replied that it didn't matter as long as the bag was at least three feet long. I ended up with a bright red and blue one. It was easy to spot on the carousel. 8 1 Link to post Share on other sites More sharing options...
Ray Chessum Posted September 4, 2020 Share Posted September 4, 2020 12 hours ago, Tony Wright said: Thanks Stephen, It'll pull more than many RTR Pacifics will! Later on, I loaded it with 20 modified RTR carriages, which it didn't slip with. Any more and it would have been even dafter. My memory of these attractive little tanks is in and around the Chester area, including the CLC, where they rarely hauled more than two/three carriages. One abiding memory is observing 'The Welsh Dragon' ply its trade between Rhyl and Llandudno, watching from the footbridge at Abergele. Was there ever a shorter named train on BR? Regards, Tony. Link to post Share on other sites More sharing options...
Ray Chessum Posted September 4, 2020 Share Posted September 4, 2020 have two which will pull 6 Kitmasters with ease but I remember seeing them at Waterloo hauling twelve coaches to the carriage sidings at Clapham, but they replaced 0-4-4 M 7's doing the same job 3 Link to post Share on other sites More sharing options...
Lecorbusier Posted September 4, 2020 Share Posted September 4, 2020 (edited) 15 hours ago, Tony Wright said: It'll pull more than many RTR Pacifics will! Later on, I loaded it with 20 modified RTR carriages, which it didn't slip with. Any more and it would have been even dafter. My memory of these attractive little tanks is in and around the Chester area, including the CLC, where they rarely hauled more than two/three carriages. Pulling capacity is an interesting area (as is battery life) in the realm of radio control. As everyone is aware, battery life between charges is a consideration. The way Protocab are going seems to be to link charge life to coal/water capacities on the controller display (as far as steam loco's are concerned). The idea is that - like on the prototype - driving style can be monitered in relation to relative fuel/water (battery) consumption ... will be interesting to see how this develops over time (it is all still in the pipeline!) On haulage capacity, as we know different classes had differring capabilities. With battery power a far wider range of motors become available than using DC/DCC - (small and large/Powerful and less powerful) - across the voltage ranges. Given the increased choice of power options, maybe the ultimate goal would be to have power related to prototypical haulage capacity? Presumably in this scenario you would also have to engineer the weight of the loco such that wheel slip occurred once a given weight of train had been reached? You would also have to standardise the weight and free running of the stock. Not sure if any of that is at all feesible .... but it is an interesting thought experiment. I suspect you would run into problems relating to the none scaleability of mass and inertia? Edited September 4, 2020 by Lecorbusier 1 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted September 4, 2020 RMweb Premium Share Posted September 4, 2020 12 hours ago, Northmoor said: I'm curious about "Sir's" choice of discs for his desert island. May I suggest: Sold(er) me down the River - The Alarm Bytham Rivers of Babylon - Boney M Pacific (East) Coast Highway - The Mamas and The Papas Long Train Runnin' (behind something kit-built) - The Doobie Brothers Plus lots of other METAL tracks Rob Metal Of course Princess of the Night by Saxon. 3 Link to post Share on other sites More sharing options...
jwealleans Posted September 4, 2020 Share Posted September 4, 2020 Which would be followed in short order by 'Duchess', of course. 2 1 Link to post Share on other sites More sharing options...
Tony Wright Posted September 4, 2020 Author Share Posted September 4, 2020 7 hours ago, Woodcock29 said: I purchased three of the smaller units a couple of months ago. Was only going to buy two but when I found out the shipping cost to Oz I decided to spread the cost so bought three. I fitted one into a Craftsman C12 that will be used on an exhibition layout. It had a Mashima/Comet combination but was struggling with that - no idea why. It runs like a dream now. Another is in a D3 I've started to build. Only wish I'd bought half a a dozen or more! Might get more when I'm in the UK next - whenever that might be given current circumstances? I think the reason the DJH shipping costs is so high is that they used a courier service. Andrew Thanks Andrew, I use the DJH motor/gearbox combinations just about all the time now. They are incredibly easy to fit and give beautifully-smooth and quiet performance, as well as being very powerful. However, there are one or two 'features' about them which might put some folk off purchasing them (the 'shipping' costs to distant parts would be the same whatever the manufacturer). 1. It can't be denied they're 'expensive'. I've put 'expensive' in speech marks because that is a relative term in my view. I've lost count of the number of motor/gearbox combinations I've put together myself but they include those made (among others) by Comet, Markits, LRM, Branchlines, SE Finecast and High-Level. With the exception of the last-mentioned, all have been a 'fiddle'; inasmuch as it's often taken ages to get them really 'sweet'. Some have been noisy (usually noisier in forwards - irritating with big tender locos!) at source and in some cases (I admit) I've not been able to fully cure that irritating aspect (the recent moving footage of LB proves that, though, as mentioned, the camcorder exacerbates any whirring). The High-Level ones tend to be quieter at source (some plastic gear parts?) but great care is needed in their assembly, and I cannot get on with a final gear wheel attached to a driven axle by adhesive of some kind (a feature of some of the 'boxes). The DJH 'boxes come ready-assembled (what price a craftsman's time to do that properly?) and every one I've used since I tested the prototypes has been almost silent. So, what price for such an ease of installation, especially in the terms of time saved? I'd go as far as to state they're as good as Portescaps, and a lot quieter! The only thing I've found which could be improved is the size of the grubscrew. It should be longer, giving more 'bite', though filing a 'flat' on the driven axle helps in this case. I've recommended to DJH that a longer grubscrew be supplied. Another factor 'militating' against the 'make-up yourself' 'boxes is the non-availability of Mashima motors now. DJH has sourced alternatives which, if anything, are more-powerful, especially the AM10 version. 2. Unless one is building a loco with a barn of a boiler, the DJH 'boxes are difficult to disguise, especially if one wishes to drive on the centre axle (which I still think is preferable). However, I hope I've shown of late that by driving on the rear axle (of, say, an 0-6-0 tender loco), they're not too obtrusive - especially when everything's painted black and a crew is installed in the cab. The final call, of course, will be how much is one prepared to pay for super-smooth and powerful running? As illustrated yesterday, installing a 'Rolls-Royce engine' in a second-hand runabout is daft in a way. That DJH AM10 is probably worth more that the whole Ivatt 2-6-2T now, especially if compared with the RTR version. But, in a way, so what? I'll probably keep the little 'Mickey Mouse' now because I knew (and respected its late builder) and a dear friend gave it to me. There, I'm getting sentimental in my old age! Three more DJH motor/gearboxes should be arriving here today - ordered to power the EM Pacific/Prairie chassis I'm making for Retford. Regards, Tony. 7 1 1 Link to post Share on other sites More sharing options...
Tony Wright Posted September 4, 2020 Author Share Posted September 4, 2020 21 minutes ago, MJI said: Metal Of course Princess of the Night by Saxon. It might surprise many, Martin, That my choice for music was a classical piece! Regards, Tony. 3 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted September 4, 2020 RMweb Premium Share Posted September 4, 2020 (edited) The High Level gearbox owner supplies DJH with the gears used in "their" gearbox apparently. I prefer the High Level boxes as a) they are cheaper, b) I can fit them into almost any loco, c) you can fasten a motor onto one either by using screws of by soldering it onto the gearboxes (as suggested by Mike Edge). d) once you have built one or two of them it takes very little time in putting them together e) they run sweet as a nut as they say! And fixing the final drive to the axle is no great hardship.. after all they do glue Airliner wings together. Most have changed to include a grub screw Us mere mortals who live in Yorkshire blanch at the price of the DJH gearbox... and how big it is! Baz Edited September 4, 2020 by Barry O 3 4 4 Link to post Share on other sites More sharing options...
jwealleans Posted September 4, 2020 Share Posted September 4, 2020 13 minutes ago, Tony Wright said: I cannot get on with a final gear wheel attached to a driven axle by adhesive of some kind I thought Chris had altered them all to have a grubscrew. If he hasn't yet, he has said he was working towards doing so. 7 1 1 Link to post Share on other sites More sharing options...
micklner Posted September 4, 2020 Share Posted September 4, 2020 (edited) 22 minutes ago, Tony Wright said: Thanks Andrew, I use the DJH motor/gearbox combinations just about all the time now. They are incredibly easy to fit and give beautifully-smooth and quiet performance, as well as being very powerful. However, there are one or two 'features' about them which might put some folk off purchasing them (the 'shipping' costs to distant parts would be the same whatever the manufacturer). 1. It can't be denied they're 'expensive'. I've put 'expensive' in speech marks because that is a relative term in my view. I've lost count of the number of motor/gearbox combinations I've put together myself but they include those made (among others) by Comet, Markits, LRM, Branchlines, SE Finecast and High-Level. With the exception of the last-mentioned, all have been a 'fiddle'; inasmuch as it's often taken ages to get them really 'sweet'. Some have been noisy (usually noisier in forwards - irritating with big tender locos!) at source and in some cases (I admit) I've not been able to fully cure that irritating aspect (the recent moving footage of LB proves that, though, as mentioned, the camcorder exacerbates any whirring). The High-Level ones tend to be quieter at source (some plastic gear parts?) but great care is needed in their assembly, and I cannot get on with a final gear wheel attached to a driven axle by adhesive of some kind (a feature of some of the 'boxes). The DJH 'boxes come ready-assembled (what price a craftsman's time to do that properly?) and every one I've used since I tested the prototypes has been almost silent. So, what price for such an ease of installation, especially in the terms of time saved? I'd go as far as to state they're as good as Portescaps, and a lot quieter! The only thing I've found which could be improved is the size of the grubscrew. It should be longer, giving more 'bite', though filing a 'flat' on the driven axle helps in this case. I've recommended to DJH that a longer grubscrew be supplied. Another factor 'militating' against the 'make-up yourself' 'boxes is the non-availability of Mashima motors now. DJH has sourced alternatives which, if anything, are more-powerful, especially the AM10 version. 2. Unless one is building a loco with a barn of a boiler, the DJH 'boxes are difficult to disguise, especially if one wishes to drive on the centre axle (which I still think is preferable). However, I hope I've shown of late that by driving on the rear axle (of, say, an 0-6-0 tender loco), they're not too obtrusive - especially when everything's painted black and a crew is installed in the cab. The final call, of course, will be how much is one prepared to pay for super-smooth and powerful running? As illustrated yesterday, installing a 'Rolls-Royce engine' in a second-hand runabout is daft in a way. That DJH AM10 is probably worth more that the whole Ivatt 2-6-2T now, especially if compared with the RTR version. But, in a way, so what? I'll probably keep the little 'Mickey Mouse' now because I knew (and respected its late builder) and a dear friend gave it to me. There, I'm getting sentimental in my old age! Three more DJH motor/gearboxes should be arriving here today - ordered to power the EM Pacific/Prairie chassis I'm making for Retford. Regards, Tony. Re point 1 High Level Boxes no longer used final gears glued to the axle, and havent for quite a while . They now have a screw fixing to the axle for the final gear. They are very easy to build, high quality and cheap to buy. High Level now also offer a range of suitable motors , or there are other motors available via ebay . Point 2 Sorry to write this again, no models should have Cabs with protuding motors/gearboxes anymore, they went with the days of the XO4 types of motors.. As Tony said the DJH versions are only suitable for Pacifics, perhaps on some Atlantics ,and large good engines . They are also very overpriced. I suggest the person with the crazy postage quote, contacts High Level Kits and gets a quote for prices of postage. Hopefully it will be much cheaper, the High Level gearboxes weight is neglible. Edited September 4, 2020 by micklner 1 Link to post Share on other sites More sharing options...
Lecorbusier Posted September 4, 2020 Share Posted September 4, 2020 (edited) For me it has to be High Level. The DJH offerring is simply too large and inflexible ... Rolls Royces are after all big and heavy luxury cars! With High level I can usually find an arrangement which will fit and a gear ratio that suits ... even when I have to accommodate a battery as well in a loco as small as a Johnson 1F. Horses for courses maybe? Edited September 4, 2020 by Lecorbusier 2 Link to post Share on other sites More sharing options...
James Fitzjames Posted September 4, 2020 Share Posted September 4, 2020 1 hour ago, MJI said: Metal Of course Princess of the Night by Saxon. 'Long Train' - Sisters of Mercy 'Train' - Dubious Blues Band 'Ride this Train' - Johnny Cash ad nauseam... Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted September 4, 2020 RMweb Premium Share Posted September 4, 2020 57 minutes ago, Tony Wright said: It might surprise many, Martin, That my choice for music was a classical piece! Regards, Tony. It doesn't, and it might surprise but many rock fans can appreciate classical. 2 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted September 4, 2020 RMweb Premium Share Posted September 4, 2020 1 hour ago, jwealleans said: Which would be followed in short order by 'Duchess', of course. Wrong sort of Duchess (unlike the Princess & Saxon song) She used to be an ironhorse Twenty years ago Used to bring the mail to me Through the ice and snow I've sat alone and watched her Steaming through the night Ninety tons of thunder Lighting up the sky She was a princess of the night I saw the writing on the wall She was a princess of the night I take a ride across the sky Speeding, sparks like lightning Engine working hard Furnace on the foot plate Shining in the night Iron striking metal The sound of racing steel It's all I ever wanna hear It's music to my ears She was a princess of the night I saw the writing on the wall She was a princess of the night I take a ride across the sky She was a princess of the night I saw the writing on the wall She was a princess of the night I take a ride across the sky Ninety tons of thunder Lighting up the sky Steaming red hot pistons See the wheels flash by Hear the whistle blowing Streaking down the track If I ever had my way I'd bring the princess back one day She was a princess of the night I saw the writing on the wall She was a princess of the night I take a ride across the sky (sky, sky, sky) Seen them a few times, great band, still touring and I last saw them over 30 years ago. 6 Link to post Share on other sites More sharing options...
Chuffer Davies Posted September 4, 2020 Share Posted September 4, 2020 17 minutes ago, micklner said: Re point 1 High Level Boxes no longer used final gears glued to the axle, and havent for quite a while . They now have a screw fixing to the axle for the final gear. They are very easy to build, high quality and cheap to buy. High Level now also offer a range of suitable motors , or there are other motors available via ebay . Point 2 Sorry to write this again, no models should have Cabs with protuding motors/gearboxes anymore, they went with the days of the XO4 types of motors.. As Tony said the DJH versions are only suitable for Pacifics, perhaps on some Atlantics ,and large good engines . They are also very overpriced. I suggest the person with the crazy postage quote, contacts High Level Kits and gets a quote for prices of postage. Hopefully it will be much cheaper, the High Level gearboxes weight is neglible. Hi, Further to Mick's post I thought it worth mentioning that Chris Gibbon of High Level has sourced two new coreless motors for use with his gear boxes. They are a 12/19 (£27) and a 13/20 (£29.50) , these have 8.5mm mounting centres and a 1.5mm drive shaft. The 13/20 has enough power for the largest of 4mm locomotive, and the 12/19 is also a very powerful unit. Coupled with Chris's gear boxes these are now my first choice drive units for the loco's I'm building for Clayton, unless I have a suitable 2nd hand (quiet) Portescap unit available. I've been on to the High Level site this morning and according to the information some of Chris's gear boxes still utilise final drive gears without grub screws. Like Tony, unless you are an experienced modeller, I would avoid using these, but there are plenty of alternate configurations available where the final drive gear has a screw to hold it on the axle. I can't imagine a scenario where one of these motor/gearbox combinations can't be completely hidden within the boiler and firebox of a model without protruding into the cab or being visible under the boiler. Frank 1 2 Link to post Share on other sites More sharing options...
RMweb Gold Richard_A Posted September 4, 2020 RMweb Gold Share Posted September 4, 2020 18 minutes ago, MJI said: It doesn't, and it might surprise but many rock fans can appreciate classical. I can appreciate classical music and I like really heavy and mental rave music. Link to post Share on other sites More sharing options...
RMweb Gold Popular Post queensquare Posted September 4, 2020 RMweb Gold Popular Post Share Posted September 4, 2020 Its High level gearboxes for me for anything in 3mm or 4mm scale. As for visible lumps of mechanism, there isn't really any excuse these days. This pair of 1Fs are in 2mm scale. Jerry 11 14 Link to post Share on other sites More sharing options...
RMweb Gold Iain.d Posted September 4, 2020 RMweb Gold Share Posted September 4, 2020 8 hours ago, St Enodoc said: You could phone a friend and either ask them to order on your behalf and post them on or order for delivery to their address then post them on. A few years ago I ordered quite a lot of SMP track and had it delivered to one of my daughters, as shipping it direct is exorbitant because of its length. On my next trip to Sussex I bought a cheap sports bag and brought the track home in my checked baggage. When I went into the shop to buy the bag the girl asked me what colour I wanted. I replied that it didn't matter as long as the bag was at least three feet long. I ended up with a bright red and blue one. It was easy to spot on the carousel. Postage does seem to becoming more of an issue out to Australia. For many items I buy from UK suppliers or eBay UK, I get them delivered to my sister's house in England and she forwards them on, bless her. What she can't send on (too big / too heavy) I pick up on my trips back. I don't think I'll be back to the UK for a while, so my purchases are massing! I'll certainly need to take full advantage of the baggage allowance next time.... 1 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now