RMweb Gold McRuss Posted December 18, 2013 Author RMweb Gold Share Posted December 18, 2013 Hello, a short video update on the layout. Markus 4 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted December 30, 2013 Author RMweb Gold Share Posted December 30, 2013 In the meantime I used my static grass applicator on Ullapool. Here the result. Also the first grave stones appeared on the grave yard area.Markus 4 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted January 22, 2014 Author RMweb Gold Share Posted January 22, 2014 Hello,the last few days I continued with one of my curved modules which I started last year, and I started with the scenic base. First I applied a coat of brown latex paint and covered it with blended turf by Woodland Scenics/Noch.After the glue have dried I applied 1mm static gras.Now the glue must dry.Markus 2 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted February 19, 2014 Author RMweb Gold Share Posted February 19, 2014 Today I started with the construction of the benchwork for my future layout addition..I'm planning to built a waystation where a branchline will connect to the Garve and Ullapool RailwayThe benchwork is made from Ikea Ivar Shelves.The progress.The fiddle yard in its future position The fiddle yard in its temporary position. The trackplan of the future addition.Markus 5 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted March 3, 2014 Author RMweb Gold Share Posted March 3, 2014 Today I continued with my layout addition.Here the result.After some thoughts I decided to use two of my former Borve modules.I think I will continue tomorrow with my work.Markus 3 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted March 5, 2014 Author RMweb Gold Share Posted March 5, 2014 Yesterday I continued in my layout room.The segments for my addition are nearly complete. Only the segment with the 180^curves is missing..Fiddle Yard with extension segments.printed out trackplan.printed trackplan from the fiddle yardMarkus 2 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted March 14, 2014 Author RMweb Gold Share Posted March 14, 2014 During the last week I continued with my work on my layout addition.Markus 3 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted March 15, 2014 Author RMweb Gold Share Posted March 15, 2014 Today I cleaned up the Inverlael area a bit and placed some buildings on it.The Whisky Distilleryon the left hand the future site of the cooperagestation buildingview from Garveoverview of the station areaMarkus 3 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted April 10, 2014 Author RMweb Gold Share Posted April 10, 2014 Last week I received my JayTech HD Action Cam DVH108.Today I made a testrun with the camera.Because of the layout addition, at the moment the layout is not powered. So I pushed the camera that was placed on a N gauge Lowmac, but the camera is not sitting right on it, and the combination is a bit high, so that it didn't pass through the road overbridge. I will built a special camerawagon. Markus 2 Link to post Share on other sites More sharing options...
RMweb Premium Kris Posted April 10, 2014 RMweb Premium Share Posted April 10, 2014 You're making some fantastic progress Markus. Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted April 17, 2014 Author RMweb Gold Share Posted April 17, 2014 During the last week I began with the electrics under the first two segments, I also did the turnout mechanism there.These two segments are now finished, so that only the last station segment and the segment with the track towards the fiddle yard needs my attention.Markus 2 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted April 23, 2014 Author RMweb Gold Share Posted April 23, 2014 Today I finished the electrics of my layoutaddition,and I could run my first train since I started the work.Now a film showing a footplate view of the line from thefiddle yard to Ullapool. Markus 3 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted May 3, 2014 Author RMweb Gold Share Posted May 3, 2014 Maybe some of you remember, that I started the construction of three curved modules last autum. One of the modules received a basic groundcover. And with the second one I built the landscape base. Yesterday after about three month I came back to the second module. On these module there will be a small bridge where the line crosses a small stream that enters the sea. For the bridge I used the Scalescenes tunnel mound kit, and adapted it for these purpose. Today I continued with cutting and gluing parts together (now I wait for them to dry). In my imagination there will be a derelict cottage on that module near the shoreline. So I downloaded the Cottage from Smart Models. I printed the kit twice, because the cottage is derelict, so you could see the inside of it. The walls were cut a few months back, but today I joined them. I will consider if these would be the final position of the cottage. Markus 1 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted May 7, 2014 Author RMweb Gold Share Posted May 7, 2014 The bridge is ready.Then I continued with the scenery base under the bridge.I glued some plastic strips on the base of the bridge to prevent the prints from bleeding out.Markus 3 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted May 16, 2014 Author RMweb Gold Share Posted May 16, 2014 Hello, today I made some pictures of my dam module. Most of the scenic work is no done.For the water I used cristal clear window color.I have to wire in the cables, then painting the track and put in the ballast.On the seaside of the module I will put some clear artist acrylic paste on the water for a wave effect.Markus 3 Link to post Share on other sites More sharing options...
RMweb Premium Kris Posted May 29, 2014 RMweb Premium Share Posted May 29, 2014 You've made a good job of that Markus. The water has turned out particularly nicely. Link to post Share on other sites More sharing options...
Richard Hall Posted May 29, 2014 Share Posted May 29, 2014 I love embankments and overbridges, and you don't see enough of them on model railways. Yours is a fine example and the water looks very convincing. Does anyone make otters in N gauge? The abandoned croft is a nice touch as well. Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted June 30, 2014 Author RMweb Gold Share Posted June 30, 2014 It's been a while since my last post. But in the meantime I started with the landscape of the third module, and it is now basicly finished,so that I could show it at our modular meeting in August. Here ar some pictures of the three modules.Markus 9 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted July 2, 2014 Author RMweb Gold Share Posted July 2, 2014 Good morningtoday I placed a small boat jetty on the shore of the small river, and a small motorboat is heading for it..I'm not sure if I will made a scene with the derelict cottage, which shows that the cottage will be renotated? Any recommandations?Markus Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted July 9, 2014 Author RMweb Gold Share Posted July 9, 2014 I continued on the curved modules with the lineside fencing. It was made of square styrene strips.A class 24 with a short parcels trainAnd some length of the fence is under repair by a track workers crewMarkus 3 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted July 11, 2014 Author RMweb Gold Share Posted July 11, 2014 On the third curved module the scenery is mostly done.Markus 3 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted July 11, 2014 Author RMweb Gold Share Posted July 11, 2014 A short update regarding our Great-britN modular meetingI put on the line scheme on the meeting homepage, there is themodule arangement too.http://www.great-britn.de/Treffenankuendigung2014The scheme of the lineThank you MacRat for drawing the scheme of the lineMarkus Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted August 3, 2014 Author RMweb Gold Share Posted August 3, 2014 As promised the pictures I've taken during our meetingMarkus 9 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted August 8, 2014 Author RMweb Gold Share Posted August 8, 2014 And here is a movie I made during the meeting. Markus 4 Link to post Share on other sites More sharing options...
RMweb Gold McRuss Posted August 31, 2014 Author RMweb Gold Share Posted August 31, 2014 Since it went quiet about my Garve and Ullapool Railway. Today I decided to work on the planned textile mill forUllapool. The first building is the Modelrailway Scenery factory kit.For quite a while I recognised that on my Ullapool goods shed, the walls with door openings are wraping.I will try to fix it, but if that doesn't work I will redo the shed.Markus Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now