RMweb Premium Mark Forrest Posted May 17, 2019 Author RMweb Premium Share Posted May 17, 2019 8 hours ago, Stubby47 said: Or have a crane lowering it into position / taking it away. Interesting idea. I'm not sure I'd have enough space for a decent sized crane and want the scene on Fryers to look fairly mundane, so probably not what I'm looking for, thanks though. 7 hours ago, Fat Controller said: It could be a hire depot; an excuse to have a few Portaloos and Portastores lined up as well. I've been using the websites of several companies dealing in hire and sale of Portakabins for research, the thought of modelling one of them hadn't crossed my mind. I have an idea for some steps up to the upper 'kabin; it's likely to involve some brass etch, swearing and burnt fingers... 1 Link to post Share on other sites More sharing options...
Fat Controller Posted May 17, 2019 Share Posted May 17, 2019 15 minutes ago, Mark Forrest said: Interesting idea. I'm not sure I'd have enough space for a decent sized crane and want the scene on Fryers to look fairly mundane, so probably not what I'm looking for, thanks though. I've been using the websites of several companies dealing in hire and sale of Portakabins for research, the thought of modelling one of them hadn't crossed my mind. I have an idea for some steps up to the upper 'kabin; it's likely to involve some brass etch, swearing and burnt fingers... The crane could simply be a lorry-mounted HIAB; that's how I've seen them being picked up and set down. Though they're bulky, they're relatively light. 1 2 Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted May 18, 2019 Author RMweb Premium Share Posted May 18, 2019 22 hours ago, Fat Controller said: The crane could simply be a lorry-mounted HIAB; that's how I've seen them being picked up and set down. Though they're bulky, they're relatively light. True, I'd imagine a large forklift could do the job too Link to post Share on other sites More sharing options...
RMweb Premium Popular Post Mark Forrest Posted June 22, 2019 Author RMweb Premium Popular Post Share Posted June 22, 2019 The VGA van I bought at Bloxwich show has been fitted with its suspension and P4 wheels this week (although is currently lacking axleboxes) It can now join another couple of recently rewheeled vans in the queue for weathering and coupling fitting. Here's where I have got to with the steps to the upper Portakabin. Adapted from a Langley Models fire escape etch, I had to extend it to get enough height. Not entirely happy with it though. I might cut away some of the vertical bars supporting the handrail to give it a more lightweight and temporary look. Obviously, it needs some proper legs to support the landing! 18 1 2 Link to post Share on other sites More sharing options...
Grampus Posted June 22, 2019 Share Posted June 22, 2019 Mark, for what little it is worth, I would leave well alone- I think the steps look spot on: they already look pretty lightweight to me. Perhaps once they are primed and toned down?... Best wishes, Paul Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted June 23, 2019 RMweb Gold Share Posted June 23, 2019 Prolly a bit late, but I thought these had possibilities as a lightweight jobby. https://www.modelscenerysupplies.co.uk/brands/Auhagen Models/80101 Mike. Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted June 23, 2019 RMweb Gold Share Posted June 23, 2019 Just leave the steps on the floor, no need to add them in place. Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted June 23, 2019 Author RMweb Premium Share Posted June 23, 2019 5 hours ago, Enterprisingwestern said: Prolly a bit late, but I thought these had possibilities as a lightweight jobby. https://www.modelscenerysupplies.co.uk/brands/Auhagen Models/80101 Mike. Interesting, that's more like the sort of thing I had in mind. I already had the Langley one though so I'm using up stuff I have "in stock". Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted June 23, 2019 RMweb Gold Share Posted June 23, 2019 You must have some Yorkshire blood in you! Mike. 1 Link to post Share on other sites More sharing options...
briantwigley Posted June 23, 2019 Share Posted June 23, 2019 The steps look superb 1 Link to post Share on other sites More sharing options...
26power Posted June 23, 2019 Share Posted June 23, 2019 4 hours ago, Mark Forrest said: Interesting, that's more like the sort of thing I had in mind. I already had the Langley one though so I'm using up stuff I have "in stock". They had some double deck ones near me until quite recently. Pretty sure it was one flight of steps within the length of the building, but the door might have been in a different place to yours. If you google double deck portakabins and switch to images you will find some like what you have done. The supports for the landing for some seemed very lightweight. I did look briefly at the proper portakabin website but didn’t immediately see any images that might help, but it might be worth a more in-depth exploration. Hope of some assistance! 1 Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted June 24, 2019 Author RMweb Premium Share Posted June 24, 2019 23 hours ago, 26power said: They had some double deck ones near me until quite recently. Pretty sure it was one flight of steps within the length of the building, but the door might have been in a different place to yours. If you google double deck portakabins and switch to images you will find some like what you have done. The supports for the landing for some seemed very lightweight. I did look briefly at the proper portakabin website but didn’t immediately see any images that might help, but it might be worth a more in-depth exploration. Hope of some assistance! Thanks. Yes, I’m thinking the single flight of stairs, it was more the design of the handrails in the Auhagen example that Mike suggested that I had in mind. 2 Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted January 22, 2020 Author RMweb Premium Share Posted January 22, 2020 Having recently rediscovered my modelling mojo, I thought I'd take a look at something I'd been meaning to do for a while; point rodding. I bought a pack of the Wills rodding ages ago, not long after it was first released, only to discover it's massively over scale so decided against using it. However, I decided I'd give it a try, hoping that it wouldn't look too bad and be a relatively quick fix (compared to soldering fiddly brass components). I didn't think the facing point lock looked too bad, thought I might get away with it once painted and weathered to tone it down a bit; but I'm not sure I can live with the rodding and stools. Some shortcuts just aren't worth taking, I think an order to Modelu will be required. I can at least use the Wills stuff to mark out the distances between the stools and work out how many are needed (or save it in case I ever do anything in 7mm:1'). 11 1 1 Link to post Share on other sites More sharing options...
dj_crisp Posted January 23, 2020 Share Posted January 23, 2020 I rather like the point rodding... I've very tempted to try it myself. Thanks for sharing Will Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted January 23, 2020 Author RMweb Premium Share Posted January 23, 2020 27 minutes ago, dj_crisp said: I rather like the point rodding... I've very tempted to try it myself. Thanks for sharing Will PM me your address and I'll stick an almost complete pack of the Wills point rodding in the post. 1 Link to post Share on other sites More sharing options...
Southwich Posted March 19, 2020 Share Posted March 19, 2020 On 22/01/2020 at 19:55, Mark Forrest said: Having recently rediscovered my modelling mojo, I thought I'd take a look at something I'd been meaning to do for a while; point rodding. I bought a pack of the Wills rodding ages ago, not long after it was first released, only to discover it's massively over scale so decided against using it. However, I decided I'd give it a try, hoping that it wouldn't look too bad and be a relatively quick fix (compared to soldering fiddly brass components). I didn't think the facing point lock looked too bad, thought I might get away with it once painted and weathered to tone it down a bit; but I'm not sure I can live with the rodding and stools. Some shortcuts just aren't worth taking, I think an order to Modelu will be required. I can at least use the Wills stuff to mark out the distances between the stools and work out how many are needed (or save it in case I ever do anything in 7mm:1'). Hi Mark, Hope you’re doing ok given the ongoing virus situation! I just wanted to ask if you had anymore photos of the point rodding kit please? Like Will I’m also considering using it at Motts Lane so any photos would be much appreciated. Hopefully the isolation brings some more progress at Fryers and on your new layout! Thanks in advance, Will Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted March 21, 2020 Author RMweb Premium Share Posted March 21, 2020 On 19/03/2020 at 12:31, Southwich said: Hi Mark, Hope you’re doing ok given the ongoing virus situation! Hi Will, Good thanks, although as I work for a food retailer, it's keeping me rather more busy than usual!!! I've removed the parts of the Wills rodding that had fitted so no other photos unfortunately. I'd suggest looking at the Modelu rodding stools, etched cranks (think the ones I have are from Brassmasters) and square wire from Wizard for the rodding. Good to see your layout progressing. Stay safe, keep well. Cheers, Mark 1 1 1 2 Link to post Share on other sites More sharing options...
Southwich Posted March 21, 2020 Share Posted March 21, 2020 9 hours ago, Mark Forrest said: Hi Will, Good thanks, although as I work for a food retailer, it's keeping me rather more busy than usual!!! I've removed the parts of the Wills rodding that had fitted so no other photos unfortunately. I'd suggest looking at the Modelu rodding stools, etched cranks (think the ones I have are from Brassmasters) and square wire from Wizard for the rodding. Good to see your layout progressing. Stay safe, keep well. Cheers, Mark Thanks for the info Mark much appreciated! I’m really enjoying the EM switch, definitely distracting from the ongoing situation! Thanks - you too. Kind regards, Will 1 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted February 10, 2021 Author RMweb Premium Share Posted February 10, 2021 My modelling time over the past year has mainly been focused on work on my new layout and on various rolling stock projects. Fryers does see occasional action, it's set up in the room next to my office, I sometimes pop in there to shuffle a few wagons around in the short gaps between seemingly endless Teams calls. I've been having a look at some of my EM gauge stock, with a view to rewheeling a few of my favourite items to add a bit of variety to these brief shunting sessions. However, there's a problem. These short wheelbase rigid wagons seem to be exceptionally good at showing up some less than perfect aspects of my track. There's nothing for it; time for another engineer's possession. 15 2 Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted February 11, 2021 Author RMweb Premium Share Posted February 11, 2021 The problem here was that the wheels would rise up slightly (not enough to derail, but enough to be noticeable) when passing over the nose of the vee. Root cause seems to be that the track is slight wide to gauge here and the rear of the wheel was being forced to ride up on the check rail, with the check rail removed stock seems to passing through more smoothly. This cruel photo highlights few other things that need attention. As you can see, lazy me I only painted the chairs on the side of the rails that are visible from the front of the layout. Also, the timbers on the section of the tandem turnout that I replaced a while ago are still in unpainted plastic. Finally, the uncoupling magnet on the mainline (bottom right of picture) that never gets used needs its hole in the ballast filling in. So I have a few jobs to be getting on with then... 8 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Siberian Snooper Posted February 12, 2021 RMweb Premium Share Posted February 12, 2021 Did you use a check gauge to set the check rail? Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted February 12, 2021 Author RMweb Premium Share Posted February 12, 2021 3 hours ago, Siberian Snooper said: Did you use a check gauge to set the check rail? I would have thought so, but it's been a while so hard to say what gauges were used. Not taking any chances this time though... 5 Link to post Share on other sites More sharing options...
RMweb Premium Siberian Snooper Posted February 12, 2021 RMweb Premium Share Posted February 12, 2021 Is that a mint gauge, I see to the right of the roller gauges? A very useful bit of kit, that you can use to check that your rolling stock will go through the turnouts, or anywhere you think may be a bit tight to gauge. 1 Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted February 12, 2021 Author RMweb Premium Share Posted February 12, 2021 7 hours ago, Siberian Snooper said: Is that a mint gauge, I see to the right of the roller gauges? A very useful bit of kit, that you can use to check that your rolling stock will go through the turnouts, or anywhere you think may be a bit tight to gauge. Yes it is. It’s a recent purchase and a very useful tool for this type of fault finding and fine tuning. 1 Link to post Share on other sites More sharing options...
RMweb Premium Mark Forrest Posted February 14, 2021 Author RMweb Premium Share Posted February 14, 2021 New chairs installed with only minimal amounts of swearing, no chairs broken or lost on the floor either! A bit of trying up required before some fresh ballast. 13 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now