RMweb Premium Craig Watson Posted September 25, 2019 RMweb Premium Share Posted September 25, 2019 10 hours ago, simon br blue said: They look good, what did you use to make the joins in the tank lagging? Thanks Simon, The banding was made with Salters 0.030" x 0.030" microstrip, attached to the barrel before painting. Thanks for your help with the wagons, really pleased with how these have came out. Link to post Share on other sites More sharing options...
RMweb Premium SHerr Posted November 16, 2019 RMweb Premium Share Posted November 16, 2019 On 14/07/2019 at 23:44, simon br blue said: Cheers for the tip about 51L/wizard models, I purchased some ferry fittings and various etched wheels. Regarding the Wisbech and Upwell models, I'm still working on them, the balcony railings are the weak point at the moment, maybe need etching or laser cutting. Work has also continued with the various Polybulk wagons. I rescaled and printed a 4mm version of the E443 slab-sided Polybulk, the body is grey PLA and printed in 2 parts on the Balco printer, the details are grey resin printed on the Form 2. The bogies are Shapeways Multi Jet Fusion Y25 bogies. 4mm E443 Polybulk by simon br blue, on Flickr 4mm E443 Polybulk by simon br blue, on Flickr The other 4mm Polybulk that's nearly finished is the Malt Distillers version. Balco PLA 2 part body, Form 2 grey resin details, Shapeways WSF Y25 bogies. Etched ferry loops and brake wheels from 51L/wizard models. 4mm Malt Distillers Polybulk by simon br blue, on Flickr 4mm Polybulks by simon br blue, on Flickr Moving up in scale the 7mm Grainflow Polybulk is nearly finished. Similar to the first Polybulk its made with a Balco PLA 3 part body, Shapeways WSF Details and Y25 bogies. 7mm Grainflow Polybulk by simon br blue, on Flickr 7mm Grainflow Polybulk by simon br blue, on Flickr 7mm Grainflow Polybulk by simon br blue, on Flickr Finally for tonight is the 1/32 Grainflow polybulk pictured with the 2 smaller versions (which makes the 4mm version look tiny). It's made the same way as the 7mm version with Balco PLA 3 part body, Shapeways WSF Details and Y25 bogies. Grainflow Polybulks by simon br blue, on Flickr Grainflow Polybulks by simon br blue, on Flickr Hi there, Have you done anything about transfers for the Malt Distillers Polybulks? I've got 3 modified Electrotren wagons in various stages but am stuck on the transfer front. I think there's all look great - I've got a bit of a thing for Polybulks! Link to post Share on other sites More sharing options...
simon br blue Posted November 20, 2019 Author Share Posted November 20, 2019 Steve from Railtec has mentioned producing these previously. Hopefully he can produce these and the Grainflow decals. Link to post Share on other sites More sharing options...
railtec-models Posted November 21, 2019 Share Posted November 21, 2019 19 minutes ago, simon br blue said: Steve from Railtec has mentioned producing these previously. Hopefully he can produce these and the Grainflow decals. There are some Polybulk decals in the catalog already, though without reading the previous several posts they may not be a 100% fit for what's needed. Limited resources recently been working on the CO2 distillers, which are an absolute can of worms as there are at least 3 variants, so packs are being made to suit the specific variant which is available on Shapeways (smaller style bodyside anchor box without corrugated vehicle ends). Doesn't help that there's little consistency in the sizes and styles of many of the markings too. Probably at least a full day's labour so far just on researching, graphic design of all the elements, testing and manufacturing a suitable pack for the CO2s alone. And people wonder why there are so few transfer manufacturers... 2 Link to post Share on other sites More sharing options...
simon br blue Posted November 22, 2019 Author Share Posted November 22, 2019 Cheers Steve, hopefully get some of these at Warley. Pictures of a couple of more wagons below. First up is the 7mm PAA ICI Urea hopper with White Natural Versatile Plastic chassis with PLA hopper, Form2 Grey resin hopper top doors and wire pipe runs. I struggled to find a good colour match and ended up mixing up a similar colour. 7mm PAA ICI Urea hopper by simon br blue, on Flickr 7mm PAA ICI Urea hopper by simon br blue, on Flickr 7mm PAA ICI Urea hopper roof detail by simon br blue, on Flickr Next wagon is a 7mm TUA Carless tank wagon, White Natural Versatile Plastic chassis, tank ends, ladders and walkway. 63mm plastic pipe for barrel with masking tape used for tank joins and homemade transfers. This is the shorter tank, I now have a longer wheelbase version to build. 7mm TUA tank wagon by simon br blue, on Flickr 7mm TUA tank wagon by simon br blue, on Flickr 7mm TUA tank wagon top detail by simon br blue, on Flickr Another new wagon thats nearly finished is a 7mm KFA Warflat wagon fitted with GPS bogies. Body printed in 2 parts in grey PLA printed on Balco printer. GPS bogies and bufferbeam printed in versatile plastic from Shapeways. Air brake fittings and vehicle chocks printed in clear resin on Form 2. Handbrake wheels and securing eyes not fitted yet. Its been identified that the bogies are too narrow and I've now drawn some wider ones. 7mm Warflat wagon by simon br blue, on Flickr 7mm Warflat wagon by simon br blue, on Flickr 7mm KFA Warflat by simon br blue, on Flickr 7mm KFA Warflat by simon br blue, on Flickr 7mm KFA Warflat by simon br blue, on Flickr 3 Link to post Share on other sites More sharing options...
RMweb Premium PaulCheffus Posted November 22, 2019 RMweb Premium Share Posted November 22, 2019 On 21/11/2019 at 00:10, railtec-models said: There are some Polybulk decals in the catalog already, though without reading the previous several posts they may not be a 100% fit for what's needed. Hi To save you reading back through the previous posts they aren't the same. These are the other ones (diagrams E518 and E581) I mentioned when you kindly did the diagram E442 version. Cheers Paul 1 Link to post Share on other sites More sharing options...
simon br blue Posted November 29, 2019 Author Share Posted November 29, 2019 A couple of pictures of some 3D printed items I've finished but not posted on here yet. A 4mm JCB Loadall, Massey shunting tractor and conveyor loading a Polybulk. 4mm Wagon loading by simon br blue, on Flickr A 7mm Massey shunting tractor and a grain loading elevator printed in versatile plastic loading a 20T grain wagon. 7mm grain loading by simon br blue, on Flickr A 7mm Produce elevator, one piece printed in versatile plastic. 7mm Conveyor by simon br blue, on Flickr 3 1 4 Link to post Share on other sites More sharing options...
LNERGE Posted December 8, 2019 Share Posted December 8, 2019 Beautiful. Reminds me of.... Link to post Share on other sites More sharing options...
simon br blue Posted December 12, 2019 Author Share Posted December 12, 2019 Yes, that's one of the photos I used as a guide when drawing the conveyor. Paul Bartlett has a photo of the same process taking place at Lynn station and also a nice photo of a similar item North Elmham linked below from the Rail Scotland site- https://www.railscot.co.uk/img/23/750/ Link to post Share on other sites More sharing options...
RMweb Gold Richard_A Posted December 13, 2019 RMweb Gold Share Posted December 13, 2019 Will you be making some of your wagons available in 4mm scale? 1 Link to post Share on other sites More sharing options...
paul9415 Posted December 15, 2019 Share Posted December 15, 2019 On 25/01/2010 at 10:10, clarkea1 said: I've used 3D printing as well. Off the machine, the parts do come out rather grainy, with some layering evident (this is inherent in the way the machines work, and a lot better than it used to be!). However, a blast of primer followed by some rubbing down usually gives a good surface finish. It does, I am finding, mean that you're better off leaving off rivet detail and adding it afterwards (unless you want some really fiddly rubbing down to do!) I've recently had a couple of wagon bodies prototyped as a test exercise (there's a pic of the raw body on my blog, will put more as the finishing and chassis construction progresses). I'm currently working on the CAD for a loco body for an industrial shunter (below), and will let you know how things go! In terms of software, something like Google Sketchup is capable of producing the required files. There are other free packages available, but you tend to get less errors and issues with a high end CAD package. That said, if I didn't have access to one (Solidworks) in work, I certainly wouldn't shell out the couple of thousand it costs!! In terms of time, I find I can model something complex on the computer in a fraction of the time it would take me to scratchbuild it. Of course, it's not as much fun, but there's still a fair bit of work involved in the finishing and detailing process. Apologies for hi-jacking the original thread, but there seemed to be a lot of interest in the technology, so I thought it would be worth sharing my experiences. Alastair Regarding using free CAD packages Fusion 360 is quite powerful & if it is for non-commercial use you can get it for free + a GREAT HELP is there are many Fusion360 tutorials on You Tube! Link to post Share on other sites More sharing options...
simon br blue Posted December 19, 2019 Author Share Posted December 19, 2019 On 13/12/2019 at 18:37, rka said: Will you be making some of your wagons available in 4mm scale? Hi, yes I can make models available in 4mm, let me know what you're interested in, the only issue is that the models wont work out particularly cheaply as to get reasonable detail the more expensive materials will be required. Below are a couple of more wagons suitable for Kings lynn, another 7mm Polybulk in the original POLYBULK livery. This is one of the original Shapeways printed models with platicard sides added, I did get a couple of these but with the price increases at Shapeways it made sense to develop the PLA printed version. The transfers are Railtec (E442 Polybulk transfers) for most of the wagon with homemade decals to finish off. 7mm Polybulk by simon br blue, on Flickr Next wagon is a 7mm Ferry tank wagon used for chemical traffic to DOW Chemicals a Kings Lynn. This was actually printed a couple of years ago but only finished recently, the chassis and ends were printed by Shapeways in versatile plastic, Shapeways Fine detail tank hatches, PLA printed top cover and plastic pipe for the tank barrel. Finshed with homemade transfers. 7mm Ferry tank by simon br blue, on Flickr 7mm Ferry tank by simon br blue, on Flickr I have also recently been painting a couple more 7mm mineral wagons, 7mm HTV hopper with PLA body and Form 2 black resin test chassis (ZDV) and shapeways chassis (HTV's), homemade transfers, weathered with MIG and model air acrylics, the only parts not fitted yet are the handrails. The ZDV was weathered using MIG and model air acrylics and MIG streaking rust affect. 7mm HTV hoppers by simon br blue, on Flickr 7mm hopper by simon br blue, on Flickr The 7mm 16t mineral wagons are Lima body with Shapeways chassis, various weathering effects used to experiment with finishes, again weathered using MIG and model air acrylics and MIG streaking rust affect 7mm 16t minerals by simon br blue, on Flickr 7mm 16t mineral by simon br blue, on Flickr 1 1 Link to post Share on other sites More sharing options...
stewartingram Posted January 10, 2020 Share Posted January 10, 2020 I'm new to this thread, so apologies if I'm raising something outdated. I'm specifically interested in Wisbech & Upwell items in 4mm (00) scale. By a very devious Google route I ended up here and saw your 04 & luggage van (etc). Are they available for sale? I did manage to find you Shapeways link but can't see them there. Stewart Link to post Share on other sites More sharing options...
simon br blue Posted January 29, 2020 Author Share Posted January 29, 2020 Hi Stewart, The Wisbech & Upwell project stalled when Shapeways withdrew the material the models were designed to be printed in. I will look again to see that can be made available in other materials. Link to post Share on other sites More sharing options...
simon br blue Posted April 17, 2020 Author Share Posted April 17, 2020 Time for another update, Firstly some wagon progress, the 7mm Redland PGA hopper now has most of the transfers applied, Fox transfers for most of the details with homemade Redland decals. Additional underframe details added after looking at the Cavalex models version. 7mm Redland PGA by simon br blue, on Flickr 7mm Redland PGA by simon br blue, on Flickr Next up a 7mm Polybulk in the original POLYBULK livery, this is the Shapeways version printed in versatile plastic with plasticard sides added. The transfers are mostly Railtec (using the E442 pack) with the rest homemade. 7mm Polybulk by simon br blue, on Flickr 7mm Polybulk by simon br blue, on Flickr Next wagon is an Albright and Wilson TUB Phosphoric Acid tank. This was printed several years ago but only put together near the end of last year. just requiring transfers which is the holdup now as I don't have a way of printing the white lettering. 7mm TUB Phosphoric acid tank by simon br blue, on Flickr 7mm TUB Phosphoric acid tank by simon br blue, on Flickr 7mm TUB Phosphoric acid tank by simon br blue, on Flickr Another tank wagon nearly finished is a TTA ICI Caustic Soda tank. This is a updated model from the original Soda tank with a simplified chassis with separate underframe fittings to reduce the cost when printing through Shapeways. This tank also requires transfers and then some weathering as the colour looks too bright. 7mm Caustic Soda tank by simon br blue, on Flickr 7mm Caustic Soda tank by simon br blue, on Flickr 7mm Caustic Soda tank by simon br blue, on Flickr 3 Link to post Share on other sites More sharing options...
simon br blue Posted April 20, 2020 Author Share Posted April 20, 2020 Just a quick update to mention that with the recent Shapeways price reduction on their PA12 material it has made a number of the 4mm models worth making available for sale including some of the Wisbech and Upwell items and a couple of vehicles. Link below to the shop. https://www.shapeways.com/shops/brbluemodels A model that I've been working on recently is the 1/32 class 25 with most progress posted on the 1:32 section of the Western Thunder forum. 1:32 Class 25/1 bodyshell Printed by Shapeways in WSF, Primed with Halfords primer/filler and then a second coat of grey primer after a quick sand. 1:32 Class 25/1 bodyshell by simon br blue, on Flickr 25/1 radiator end roof detail with WSF roof grill and cab join made from tape and water slide rivets. 1:32 class 25/1 roof deatils by simon br blue, on Flickr 25/1 Air braked version with outwards hinge grills and additional access hatch fitted with water slide rivets. 1:32 class 25/1 grills by simon br blue, on Flickr 1:32 buffer for class 25, printed on Form 2 with homemade piano wire springs and brass shaft. 1:32 OLEO class 25 buffer by simon br blue, on Flickr Class 25/1 cab interior with PLA bulkhead and control desks, Form 2 resin controls, fire extinguisher and handbrake wheel. 1:32 class 25/1 cab interior by simon br blue, on Flickr Pre shading of grills and panel lines on 25/1 with a mixture of model air colours. 25/1 pre shading of grills by simon br blue, on Flickr Progress with the Class 25/1 with bufferbeam added. 1:32 Class 25/1 by simon br blue, on Flickr Progress with the Class 25/1 with bufferbeam added. Multi working sockets printed on Form 2 with elastic cables. WSF vac and steam pipes. Air pipe fitting printed on Form 2 with elastic hoses. Coupling from Dingler 1:32 Class 25/1 by simon br blue, on Flickr 4 9 Link to post Share on other sites More sharing options...
simon br blue Posted April 24, 2020 Author Share Posted April 24, 2020 Another update, Been doing some transfer application recently in 4mm and 7mm. First was the 7mm TTA Caustic soda tank with transfers from Precision Labels. This is the first of the TTA that I made and is painted in a darker colour to the most recent wagon. TTA Caustic soda tank by simon br blue, on Flickr TTA Caustic soda tank by simon br blue, on Flickr The next wagon is one of the 4mm Grainflow wagons, this wagon has the Fox transfers Grainflow decals although I've not finished all the smaller elements but took a couple of photos when I'd finished the other wagons. 4mm Grainflow wagon by simon br blue, on Flickr 4mm Grainflow wagon by simon br blue, on Flickr The next two wagons are both 4mm Slab sided Polybulks, one in the original livery and the second in the later Nacco blue livery, both use the Railtec 4mm decals with the Nacco version using the alternate numbers supplied with the Polybulk pack. 4mm Polybulk wagon by simon br blue, on Flickr 4mm Nacco Polybulk by simon br blue, on Flickr 1 2 Link to post Share on other sites More sharing options...
bradfordbuffer Posted April 27, 2020 Share Posted April 27, 2020 On 20/04/2020 at 23:59, simon br blue said: Just a quick update to mention that with the recent Shapeways price reduction on their PA12 material it has made a number of the 4mm models worth making available for sale including some of the Wisbech and Upwell items and a couple of vehicles. Link below to the shop. https://www.shapeways.com/shops/brbluemodels A model that I've been working on recently is the 1/32 class 25 with most progress posted on the 1:32 section of the Western Thunder forum. 1:32 Class 25/1 bodyshell Printed by Shapeways in WSF, Primed with Halfords primer/filler and then a second coat of grey primer after a quick sand. 1:32 Class 25/1 bodyshell by simon br blue, on Flickr 25/1 radiator end roof detail with WSF roof grill and cab join made from tape and water slide rivets. 1:32 class 25/1 roof deatils by simon br blue, on Flickr 25/1 Air braked version with outwards hinge grills and additional access hatch fitted with water slide rivets. 1:32 class 25/1 grills by simon br blue, on Flickr 1:32 buffer for class 25, printed on Form 2 with homemade piano wire springs and brass shaft. 1:32 OLEO class 25 buffer by simon br blue, on Flickr Class 25/1 cab interior with PLA bulkhead and control desks, Form 2 resin controls, fire extinguisher and handbrake wheel. 1:32 class 25/1 cab interior by simon br blue, on Flickr Pre shading of grills and panel lines on 25/1 with a mixture of model air colours. 25/1 pre shading of grills by simon br blue, on Flickr Progress with the Class 25/1 with bufferbeam added. 1:32 Class 25/1 by simon br blue, on Flickr Progress with the Class 25/1 with bufferbeam added. Multi working sockets printed on Form 2 with elastic cables. WSF vac and steam pipes. Air pipe fitting printed on Form 2 with elastic hoses. Coupling from Dingler 1:32 Class 25/1 by simon br blue, on Flickr Outstanding work ......3mm version please Link to post Share on other sites More sharing options...
Supaned Posted April 28, 2020 Share Posted April 28, 2020 fantastic models and great use of 3d printing technology. Have you considered doing cement tankers in 7mm? either the straight tank variant or the V shape ? I appreciate the latter is occasionally available elsewhere, but probably something very useful for 7mm modern modellers. Link to post Share on other sites More sharing options...
Edwardian Posted April 28, 2020 Share Posted April 28, 2020 On 27/01/2017 at 23:39, simon br blue said: Time for another update. I've not had chance to get the previous prints painted but hopefully the weather will improve and warm up a bit soon. On the drawing front I've nearly finished another Wisbech andUupwell item of rolling stock GER brake no.16, render below shows current progress but its been harder to find photos and detail compared to the locos or modern wagons I've done previously. I have some feedback in relation to this model (in 4mm) on this, which I hope you will take as constructive. I think that a corrected design printed in a better material than is currently available, could result in a very good model. I am sorry not to have offered feedback sooner, but the beauty of 3D is ability to make changes. The model appears only available in grey "PA12". This material seems every bit as nasty as WSF; it is rough and captures the detail poorly, e.g. no relief on the door vents. Overall, I liked the design, and it was good to have a floor and the underframe and brake details. There are some issues, however. This van was converted from an 1875 GER coach, and a better knowledge of coaches of this vintage and GE design would have assisted in the design of this model. There are plenty of pictures of old, mainly grounded, coach bodies of this ilk on the web. The solebar looks a little too recessed, or, perhaps, the upper foot-board too shallow, as if steel channel was intended, whereas this is a wooden solebar prototype. The upper foot board needs to extend outward further. The headstocks, too, were wooden and, thus, should be deeper than on the model and, also, would have had rounded profile ends. The body has some serious issues in two respects. First, the style of the body panelling is incorrect for this vehicle: The waist should not feature the recessed panels with radiussed corners. There should be square-cornered raised beading with a slightly rounded profile. This is very much a feature of 1860s and 1870s carriage design. The conservative GE carried it into the 1880s. The panel style above the waist is wrong. The door lights, quarter lights and blind vertical panels above the waist should have square bottomed corners and large rounded (in fact triple-radius) tops. This style persisted on the GER until the second half of the 1890s. Second, there are elements of the body treatment that do not reflect any carriage building practice of the era: The groove representing the doors is carried all the way to the top of the body, making the doors on the model appear the full height of the coach. Doors terminate below the eave panels, or the coach falls to bits! The panels above the waist are framed with raised beading, almost like a window bolection, with gaps between it and the adjacent panelling that should not be there; shades of the egregious Hornby 4-wheel coach. The upper part of the non-brake end is wholly wrong. I appreciate you could not find a picture. It is difficult to derive the necessary details from pictures of No.16, but, if you know what GER coaches of the period actually looked like, you can understand what you are seeing better when you squint at little pictures and partial views of No.16. Looking at the picture above, you can discern all the features I've pointed out. This picture is of a GE coach of the same period of construction and usefully shows much more clearly how things would have been on No.16, including: - Rounded thick wooden headstock - non-brake end - waist beading - upper panels and windows Again, trying to be helpful (!) Please feel free to PM if you want to discuss. / 1 Link to post Share on other sites More sharing options...
simon br blue Posted April 28, 2020 Author Share Posted April 28, 2020 Hi, Thanks for the comments, always good to get feedback. just to reply to the comments above- These models were originally resigned for the Shapeways black resin which they stopped using a couple of years ago. I only made the models available recently as the cost for PA12 was significantly reduced recently meaning that some may want to order one. Shapeways SLA resin material would cost about £75 and the Fine Detail plastic (previously FUD) would cost over £60, I can make these available if anyone wants them but would have to check if they meet the design guidelines. Below is a text print that was printed by Shapeways in their HDA resin before they pulled the material. Now that they have been pointed out I can see the issues with the bodyside and think some of these carry over from elements copied from previous Wisbech and Upwell coaches and looking at some other vintage coaches and as mentioned I could't find a photo of the non break end with the door. I think the chassis issue was because I struggled to find decent photos and used the photos available of the brake on the Mid Suffolk Railway which doesn't have the original underframe. All the models available on Shapeways can be viewed in their 3D viewer which may show up any detail issues on other models and as mentioned most details can be easily modified when noticed. 1 Link to post Share on other sites More sharing options...
Edwardian Posted April 28, 2020 Share Posted April 28, 2020 11 minutes ago, simon br blue said: Hi, Thanks for the comments, always good to get feedback. just to reply to the comments above- These models were originally resigned for the Shapeways black resin which they stopped using a couple of years ago. I only made the models available recently as the cost for PA12 was significantly reduced recently meaning that some may want to order one. Shapeways SLA resin material would cost about £75 and the Fine Detail plastic (previously FUD) would cost over £60, I can make these available if anyone wants them but would have to check if they meet the design guidelines. Below is a text print that was printed by Shapeways in their HDA resin before they pulled the material. Now that they have been pointed out I can see the issues with the bodyside and think some of these carry over from elements copied from previous Wisbech and Upwell coaches and looking at some other vintage coaches and as mentioned I could't find a photo of the non break end with the door. I think the chassis issue was because I struggled to find decent photos and used the photos available of the brake on the Mid Suffolk Railway which doesn't have the original underframe. All the models available on Shapeways can be viewed in their 3D viewer which may show up any detail issues on other models and as mentioned most details can be easily modified when noticed. It's a nice model, badly let down by the material. It's certainly worth tweaking to bring it in line with the prototype, if you are interested. Then, perhaps, you might consider selling the right to print, because a much better print could no doubt be obtained on a home Photon or via a hub? When out of lock-down, the factory that does the Rails SE&CR van offers an SLA service; it would be very interesting to know the cost of printing this coach would be. They could print them for you for sale. Yes, you have to do post and packaging, but I would suggest a better quality than Shapeways and at less cost. Link to post Share on other sites More sharing options...
simon br blue Posted April 28, 2020 Author Share Posted April 28, 2020 (edited) 4 hours ago, Edwardian said: It's a nice model, badly let down by the material. It's certainly worth tweaking to bring it in line with the prototype, if you are interested. Then, perhaps, you might consider selling the right to print, because a much better print could no doubt be obtained on a home Photon or via a hub? When out of lock-down, the factory that does the Rails SE&CR van offers an SLA service; it would be very interesting to know the cost of printing this coach would be. They could print them for you for sale. Yes, you have to do post and packaging, but I would suggest a better quality than Shapeways and at less cost. Hi, like most people on here I don't sell or give away my stl files. I have a Form 2 SLA printer but it would struggle to print the coach and to remove the support material easily. I models in this thread are made for myself as a hobby, I make them available for others if requested. A more modern item of stock that i was able to take plenty of reference photos of is a 156 DMU. I wasn't able to find any detailed drawings but using the drawings and some side and front on photos I've made some drawings although there are some more detail to finish like the interior and sorting out a way of making the window frames - I'm thinking possibly laser cut frames or an etch. I did test print of the basic shell printed in 2 parts with the main body and a cab end with gangway printed as one part. I then printed a test of the snowplow and coupling on the Form 2 and a bogie on my Balco printer. I think the best way to print this would be as a one piece shell on Shapeways with separate details bogies and under frame. 156 cab render by simon br blue, on Flickr 156 bogie render by simon br blue, on Flickr 156 Underframe render by simon br blue, on Flickr 7mm 156 DMU test print by simon br blue, on Flickr 7mm 156 DMU test print by simon br blue, on Flickr Edited April 28, 2020 by simon br blue 3 Link to post Share on other sites More sharing options...
Edwardian Posted April 28, 2020 Share Posted April 28, 2020 14 minutes ago, simon br blue said: Hi, like most people on here I don't sell or give away my stl files. I have a Form 2 SLA printer but it would struggle to print the coach and to remove the support material easily. I models in this thread are made for myself as a hobby, I make them available for others if requested. Understood, though that's a shame. Your HDA print looked very nice, but do you think I should have paid c. £50 for this ? Would you? Link to post Share on other sites More sharing options...
simon br blue Posted April 29, 2020 Author Share Posted April 29, 2020 I realize you are disappointed with the model, I think the current price is £38 for the model but would I pay that for a similar print in PA12, yes I would and I currently have some 4mm models on order with Shapeways but I realize that PA12 that is a compromise between design limitations, surface finish and minimum thicknesses. Hopefully 3D printing will continue to improve where prints like the HDA model in my last post can be produced without the need for support like the current SLA models, without support residue marks like the Fine Detail Plastic on Shapeways and without the layering or lower resolution seen on FDM printer. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now