Jump to content

Recommended Posts

If anyone remembers Jamieson loco kits, I have a couple of examples - ex CR Lambie 0-6-0's, both motorised, but not in very good running order, but they fill a nice space in the loco yard.  They were in CR livery, but I've overpainted them in BR "dirty black," and will add numbers and BR totems when I find the transfers in the loft......... (too big a loft, maybe?).

 

DSCF7249.jpg.7608d51640d6ee3594482e4c3a66230c.jpg

 

Or in black and white - more authentic?

DSCF7249.jpeg.a637d80432fe4995c9ef5c0dc5091304.jpeg

 

DSCF7247.jpeg.e0dbc671277c4814994720ede23ab102.jpeg

DSCF7249.jpg

  • Like 10
Link to post
Share on other sites
  • 4 weeks later...

I've been aware for some time that most of my locos have not been carrying the correct lamp codes, and in some cases, inappropriate numbers for the Arbroath area, so daughter came to the rescue with the supply of some sets of Springside BR, LNER and LMS lamps most of which have now been attached to the layout's locos.

Brake vans and rear coaches on passenger rakes remain to be so treated, but that hopefully will come soon........

 

Some posed shots to show the results - much shunting and remarshalling of locos and stock now required to restore the "status quo" before running can recommence.

 

In the station goods yard, improbably........

 

DSCF7264.jpeg.45ce337fb938da994ef1b0b3e23de6d8.jpeg

 

DSCF7269.jpeg.f37d11c17deb29d02530a83f82abd2fd.jpeg

 

Another batch in the loco yard.

 

DSCF7265.jpeg.d7d7594a2f441bb9f174059af127f28c.jpeg

 

In the very bare storage sidings.

 

DSCF7268.jpeg.e00c8ad8a4a1678e6fc5a921bcfeb20c.jpeg

 

..........and one of the diesels got a new number, as well.

 

DSCF7271.jpeg.ee5ed13a9f914e72b6de0b84c46066af.jpeg

 

 

  • Like 10
Link to post
Share on other sites
  • 2 weeks later...

Hi Ken, Happy New Year to you and yours. Thanks for the message. Unfortunately I’ve not done anything to my shed layout for almost a year! We are grandparents to a labradoodle, so spend 3or 4days a week looking after him. This isn’t the whole reason, I’m just being bone idle, but I must get back to it shortly. I still need to make shed ventilators (?) then I need to make some more boards and extend the layout.

Ive been keeping up with you and a few others though, and your shed lineup looks very impressive.

All the best Les

Link to post
Share on other sites

Hi Les

Great to hear from you - you are allowed time off for good behaviour!

I do the same regularly, otherwise you can get too focussed, if such a thing is possible.

I've been doing general tidying up, but there's still lots to do to get the layout to the stage I have had "in my mind's eye" for many a year.

Kind regards, Ken

Link to post
Share on other sites

I was wandering round Arbroath today and took the pics below to pass the time......

 

All quiet at Ladyloan Junction:

 

DSCF7296.jpeg.b650c753b6d8d203e87b6527b709c206.jpeg

 

At the coaling stage..........

 

DSCF7293.jpeg.0944202668c057cf728284fbc4f0b1a0.jpeg

 

A new warehouse at Inverbrothock Yard........

 

DSCF7292.jpeg.8eb860985d4314a2b1a3ae9439f99177.jpeg

 

Peering into the Arbroath North 'box .............

 

DSCF7290.jpeg.7ec9ede7ea0984946689be933183bdf1.jpeg

 

Time for bed, said Zebedee..........

  • Like 10
Link to post
Share on other sites
  • 2 weeks later...

Actually ran some trains this morning, generally without incident - my track maintenance team must have been busy.........

B1 heading down the Forfar line:

DSCF7299.jpeg.8aec730cc3f296f3449af533cea67d6c.jpeg

 

J39 still in LNER livery on an up goods passing the sheds:

DSCF7301.jpeg.ab50810513777e73d73f1fdf55d9d0a7.jpeg

 

...........and in colour:

DSCF7302.jpeg.59857565f00fd8fc42a1900c11383303.jpeg

 

Having passed through Arbroath, now heading for Dundee:

DSCF7304.jpeg.c70019ebb166188b86c3baddd9c42f4c.jpeg

 

Back to the shed area, with an Ivatt class 2 heading towards Forfar:

DSCF7306.jpeg.eca4c24bb0bd0e2efd63676e84a6d94b.jpeg

Quite a busy morning, then!

 

 

  • Like 14
Link to post
Share on other sites
  • 2 weeks later...

Good to see you back layout is progressing very well  you  have captured the station so well ,the lamps add an exta something to the locos.I have been watching a dvd of a light loco run from Edinburgh to Aberdeen in winter and the shots through Arbroath show that the builders copied your layout !

  • Funny 2
Link to post
Share on other sites
  • 3 weeks later...
  • 2 weeks later...

PS I have sorted the point blades in the foreground - the solder on the lever at the control panel had  gone dry, but a quick "squiz" with the soldering iron did the job.

 

Current project is to add in a loop for another unspecified "industry" on the central loop line - some pics showing yesterday's progress with a works train on site, together with out of scale tools needed for the job....

 

DSCF7349.jpeg.ffd4aa87797dd3389f040120b32c9838.jpeg

 

DSCF7348.jpg.7ebf9d7b9d0a1b28bd9c4a27674b84ad.jpg

 

DSCF7351.jpeg.4f4203514087b0a37d48e29136f5ab96.jpeg

 

Much to be done!

 

 

  • Like 7
Link to post
Share on other sites

Hi Manna

It's one of the International Models series in a smaller size at 9 inches tall compared to the ones behind the sheds which are 15 inches, but as you say, very useful.

They haven't been fixed in place yet, but that should happen very soon, given the current isolation situation.

Hope you are keeping healthy.

 

 

  • Like 1
Link to post
Share on other sites

Hi Ken, got the mojo back (wherever it’s been) and finally started Baltic warehouse in Dens Road(seeing as how you refused to build it for me in 7mm! Ha,ha)

I’m hoping that the picture I took will transport, if that’s the right word? Still very early stages. There aren’t that many windows in the side but I was using this card as a template. I was planning to try to incorporate some interior detail, I had all bright ideas about loads of barrels and pallets and bits and bobs but I think I’ll just stick to getting the outside scribed and painted and mess about with scatter etc outside. That’ll probably take me the whole of my enforced ‘isolation’. Something to keep me occupied anyway and out of her hair!

Talking  of which, I hope you are all keeping well and safe up there in the north?

regrds Les (ps. Looks like it’s worked???

B045A54A-A06D-42E0-9E16-A24F0E77A7A5.jpeg

  • Like 2
Link to post
Share on other sites
1 hour ago, Les Johnson said:

Hi Ken, got the mojo back (wherever it’s been) and finally started Baltic warehouse in Dens Road(seeing as how you refused to build it for me in 7mm! Ha,ha)

I’m hoping that the picture I took will transport, if that’s the right word? Still very early stages. There aren’t that many windows in the side but I was using this card as a template. I was planning to try to incorporate some interior detail, I had all bright ideas about loads of barrels and pallets and bits and bobs but I think I’ll just stick to getting the outside scribed and painted and mess about with scatter etc outside. That’ll probably take me the whole of my enforced ‘isolation’. Something to keep me occupied anyway and out of her hair!

Talking  of which, I hope you are all keeping well and safe up there in the north?

regrds Les (ps. Looks like it’s worked???

B045A54A-A06D-42E0-9E16-A24F0E77A7A5.jpeg

Hi Les

Good to hear from you again.

Even although we're "up North", we're managing pretty well, but self-isolating of course.

Your warehouse looks most impressive and will be even more so when completed.

Keep well.

Regards

Ken/Aberbrothock

 

 

Link to post
Share on other sites

Ken,another question if I may? What height would the multi armed signal outside the Baltic warehouse be? The two longest ladders appear to be about 27 rungs. Would they be 9” or a foot apart? Do you or any of your ‘cronies’ know?

Les

(great new pics btw)

 

Link to post
Share on other sites

Making some progress today - track ballasted and then backscene pasted up.

Now we can get on with the more pretty bits and add some sort of low relief factory to be served by the loop/siding.

 

DSCF7354.jpg.822a1d0929614e0eb5626ace16a65801.jpg

 

DSCF7360.jpeg.4c4cbc272efcc8031dbcb61927332f55.jpeg

 

Watch this space!

 

Les - I'll measure my Ratio kitbashed signal to get a working measurement for you.

 

 

  • Like 7
Link to post
Share on other sites

Thanks Ken. Where do you keep finding this space in your loft? You must have added about 3 extensions now? Ha,ha! That pic of mine was not taken in my lounge! Honest!

Hope  you don’t take this the wrong way but how accurate is your version of St.Vigeans box, ie. with regard to the window arrangement and flat front, as opposed to recessed brickwork?

regards Les

 

Link to post
Share on other sites

Hi Les

The loft is still the same size!  The line I'm working on runs down the centre of the loft and is part of the "South Loops" leading to the lower, (Dundee), storage sidings.

Until now it's just been a plain line of double track with a trailing crossover and point leading off to one side, with the track ballasted but no scenic work done, and that's what being done now.

Hope this makes sense.......

 

The Up signal bracket opposite the loco shed's dimensions are:

 

Total Height  - 35 feet; Ground to bracket girder - 17 feet 6 inches; Main Line post with Home and Distant arms - 17 feet; Centre Dolly with two shunt arms - 7 feet; Right Hand Dolly with one shunt arm - 4 feet.

The width of the bracket girder is 19 feet 6 inches.

 

Hopefully helpful.

 

As to the signal box, it's done to a generally standard design of the boxes that used to be in the area and is all right for my purposes as I don't have a photos of the original box, but it does look fine.

 

Happy modelling!

Ken

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.