RMweb Premium MJI Posted November 21, 2015 Author RMweb Premium Share Posted November 21, 2015 This is the inside for the FK, got another half done and tempted to redo the BFK the same way Completed FK And this is about half of my ER set, still to do are the 47, the BG to flushglaze and number, then later on another TSO to detail possibly E5660 2 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted November 21, 2015 Author RMweb Premium Share Posted November 21, 2015 Aghhh E1883 is covered in dust! Here is the BG for that set and the one above Currently painting the bars on a pile of Replica glazing, some for my two Replica BGs and some for my Hornby RMB, I have B4ed both BGs. One BG is for the ER set and the other with my 2C BSO and the RMB, will also have a 2C TSO, hope to pick up enough bits for a Mark 1 FO on B4s next Saturday. Replica BG - renumber and B4 Hornby 2A TSO - new window frames and a full respray to do Replica FO to do Lima 2C FK - new window frames and a full respray Lima 2C TSO - see below Lima 2C BSO - the one I have already posted The next set needs a 2C FK as well and I am out of toilets, ony enough left for a WR 2C BSO Its first vehicle is this 2B TSO The buffet (a RU) has already been uploaded somewhere else. Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted November 22, 2015 Author RMweb Premium Share Posted November 22, 2015 BG flush glazed, just need to sort the brakes out now, removing the cylinders, same for the RMB. getting a bit of a list for Warley now! Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted November 30, 2015 Author RMweb Premium Share Posted November 30, 2015 Well Warley. I ended up splurging on a chassis for my Airfix 76xxx and all the aftermarket bits for PWM650, kit to come later. Michael Edge and Tony Wright cost me a lot! Bought a B4 FO in bits for my WR 2B C set. FKs need a 2B (YES) for the MR set, currently stripping one down. And perversly a late windowed 2C for the WR set, I JUST have enough windows to do the 2C toilets with enough over for ! more BSO. Shawplan were out of 2ZABC frames, I need 3 at the moment, Hornby 2A TSO, Lima 2B FK, Lima 2C FK. Battery boxes on Mark 2 coaches. Limas look pretty shoddy at first so I compared them to the Replica moudlings, and guess what? They are actually pretty good BUT are mounted in the wrong position and shaped wrong. File them square and cut them off, one is pushed back slightly 1-2mm and the other the same but moved towards the centre by 4-5mm. 3 Chassis done so far, Instant improvement. Now to my 2C BSO, do I fit Replica bogies or not? Link to post Share on other sites More sharing options...
sub39h Posted December 1, 2015 Share Posted December 1, 2015 Do you have any more photos or details about what you're doing with the Lima underframes please? Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted December 1, 2015 Author RMweb Premium Share Posted December 1, 2015 Do you have any more photos or details about what you're doing with the Lima underframes please? Only did them yesterday so not yet. Keep a look out though A few have Replica bogies, MJT buffers, moved battery boxes Link to post Share on other sites More sharing options...
drgj Posted December 1, 2015 Share Posted December 1, 2015 What are the Southern Pride vinyl frames like to use? dave Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted December 2, 2015 Author RMweb Premium Share Posted December 2, 2015 What are the Southern Pride vinyl frames like to use? dave Never used them I use Extreme Etchings from Shawplan Link to post Share on other sites More sharing options...
sub39h Posted December 2, 2015 Share Posted December 2, 2015 Do the Replica bogies clip straight into the Lima underframes? Also have you reduced the body side at all on the Lima coaches? I understand they need about 1mm removing from the bottom of the body? Does this affect how they clip into their own chassis? Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted December 2, 2015 Author RMweb Premium Share Posted December 2, 2015 Do the Replica bogies clip straight into the Lima underframes? Also have you reduced the body side at all on the Lima coaches? I understand they need about 1mm removing from the bottom of the body? Does this affect how they clip into their own chassis? No you need to modify the chassis, and I left the side height alone, would have been too much work to modify Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted December 6, 2015 Author RMweb Premium Share Posted December 6, 2015 OK this is the underframe for my 2C TSO Replica B4s, Hurst air cylider and MJT buffers The underframe for the same sets RMB M1867 Plastruct section and bits of sprue Still to do are air tank, pipes to cylinders, gas cabinets, dynamo, some little panel near middle. Will be running Commonwealths taken off a Replica NEA now fitted with B4s 2 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted December 6, 2015 Author RMweb Premium Share Posted December 6, 2015 And yes the air brake cylinders are the correct size, they are about 10" diameter and 9" long the beams they are attached to are 9" square, so everything is about 3mm Link to post Share on other sites More sharing options...
drgj Posted December 11, 2015 Share Posted December 11, 2015 Has anyone used the vinyl frames from Southern Pride? Thanks Dave Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted December 11, 2015 RMweb Premium Share Posted December 11, 2015 Has anyone used the vinyl frames from Southern Pride? Thanks Dave Yes - I used them on a 4-REP based kit for one of my ultrasonic test units. UTU2 - 62482 With care, they are quite good. Cheers, Mick 1 Link to post Share on other sites More sharing options...
drgj Posted December 12, 2015 Share Posted December 12, 2015 (edited) Thanks, Mick. I thought of trying them as the Shawplan ones don't seem to be available (for earlier mk2 coaches). Excellent workmanship in your REP coach, by the way. Dave Edited December 12, 2015 by drgj 1 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted December 12, 2015 Author RMweb Premium Share Posted December 12, 2015 Thanks, Mick. I thought of trying them as the Shawplan ones don't seem to be available (for earlier mk2 coaches). Excellent workmanship in your REP coach, by the way. Dave Just pester him, they keep selling out. Got 5 gas cabinets cast will show later Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted December 20, 2015 Author RMweb Premium Share Posted December 20, 2015 Now boxed up the 2 ER mark2Ds along with E1883, and E81491 now transfered. Just need to hack off the vacuum cylinders. W3085 is also now in my current list, vacuum cylinders removed, will have shell vents fitted as well. I have to use Replica FOs as the Comet sides are early Mark 1 with no frames. I will be paint stripping a Lima 47 this holiday as I need it to be 47549, it was bought cheap off Ebay and looks like it ramraided Shawplan Now this picture amuses me, pity 549 is in IC and 513 in large logo https://www.flickr.com/photos/47362745@N07/5531616033 Oh and 513 which I modelled in 1983 could do with some etched brass on it, well it will be towing Lima / EE 2Bs and Replica FOs as SOs, maybe it should have a model Martin in W3085 as unbelivably I remember travelling in that set. And yes I am building a huge list of part completed stock as I need to wait for warm weather to spray them Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted December 22, 2015 Author RMweb Premium Share Posted December 22, 2015 3 Jouef Mark 3a FOs have arrived, one needs a gangway. What are the recommended detailing parts and tasks for these? One will become a TSO to go with my orignal TSO Just then need to decide a set, got Lima 87 flushglaze ready, will get a pantograph off JE. Then buffet, will probably have a Bachmann BG Link to post Share on other sites More sharing options...
drgj Posted December 31, 2015 Share Posted December 31, 2015 Have put an MTK mk2 coach in the kitbuilding section. dave Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted January 17, 2016 Author RMweb Premium Share Posted January 17, 2016 No pictures but more modelling carried out. 47 is now soaking in modelstrip, paint job was nice but one side had yellowing varnish and the other green poking through Both 2E are being slightly reprofiled as I did to my first 3 detailed 2Ds, some drilling required, refixed joints seem fine, car body filler was a mistake. I seem to be missing a TSO I bought 8 but can only find 7 and only 2 are 2E not 4. 2 more 2D TSOs will be joining the E1883 set, the rest not sure, may 2E them, or try to find a set with E1106, seen 2Ds next to it but no numbers. E1106 is back burner and may get sold instead. The way it is going spring will see 6 coaches ready for B&G Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted January 23, 2016 Author RMweb Premium Share Posted January 23, 2016 Two air braked Mark 1s, quite a few more to do RMB Surprising what you can do with an old model. FO May chop off the water fill pipes and replace with wire. 2 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted January 31, 2016 Author RMweb Premium Share Posted January 31, 2016 OK Got a big pile to work on still But trying to find if anyone makes the following parts. 1) The door bumpers fitted to 2BCD stock, I am trying to use plastic strip, but etched brass would be ideal. 2) The vents on the side 2DEF, the big ones are slightly damaged on a pair of 2E TSOs. 3) Door vents 2DEF, I can make some if required, couple damaged on my 2E TSOs My 2E TSOs are a mess, so spraying with filler primer to level them out and fill the gaps. They were originally converted 25 years ago and had fallen apart. Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted February 13, 2016 Author RMweb Premium Share Posted February 13, 2016 Making the door bumpers out of strip not too bad. Current tasks today are 1) Sticking one side of frames on a 2E TSO 2) Putting tiny bits of filler in the corner of the windows on the other 2E, Shawplan frames a tiny bit smaller than Airfix 3) Filing the windows bigger on my 2C FK 4) scraping off more paint from the to be 47549 Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted February 14, 2016 Author RMweb Premium Share Posted February 14, 2016 Both 2Es are now fitted with Extreme Etching frames Now working on 2C FK window apertures. 6 vehicles now ready for painting. Link to post Share on other sites More sharing options...
RMweb Premium MJI Posted February 20, 2016 Author RMweb Premium Share Posted February 20, 2016 2E TSOs primed, but look tatty, will need to sand and spray again. Got 99% of the paint off 47549, and removed all handrail wire, will refit nose ones for painting, no more body mods required, was orignally a Lima in 2 tone green with a modern style name plate. You could see the green through the blue on it. The headcode is bothering me, search for images of 47549 loco and look at blue ones with no headlamp, headcode is yellow with white circles surrounded by black. Any ideas how to do those? If dry will prime the 47 tomorrow ready for the mass spray in the spring Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now