richard i Posted July 1, 2020 Share Posted July 1, 2020 7 hours ago, woodenhead said: But these ladies play their own instruments and don't appear to be manufactured. Their regime includes that so they can feel genuine. Hours of practice and instructions on every facet of life. Taught the sister of one of the successful ones and the pressure on her to join the machine was huge. Fun it did not look. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted July 1, 2020 Author RMweb Premium Share Posted July 1, 2020 ran some trains, no photos. Soldered some tags on the end of the leads that I touch on the studs to make the points go bang. I don't think these 4 ladies are manufactured. 3 1 Link to post Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted July 2, 2020 RMweb Gold Share Posted July 2, 2020 On 30/06/2020 at 22:30, Northmoor said: They're busy with Coronavirus at the moment. Once that's out the way they can address things like Corridorcompositevirus. Good job I finished this one then. Replica/Bachmann to D1755 BCK. 10 4 Link to post Share on other sites More sharing options...
John Tomlinson Posted July 2, 2020 Share Posted July 2, 2020 22 hours ago, Gibbo675 said: Hi Woodenhead, They can come and play my instrument any time they like, unfortunately for them I don't have an organ like Jean Michel Jarre ! Gibbo. Now there's a blast from the past! At risk of losing all cred. I rather like his stuff, some of it anyway, it brings back memories of a large "O" gauge public layout in York around 40 years ago where they played one of the LP's - Oxygene I think - as backdrop. Still listen to the LP's sometimes when I'm modelling. At a similar time an old school friend was in HMV in Manchester and overheard a conversation "Have you heard the latest from Jean and Michael?" one person asked the other. Happy days. John. 4 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Alex TM Posted July 3, 2020 RMweb Premium Share Posted July 3, 2020 Hi there, Otoboke Beaver - weird, yet strangely charming. Had a listen to a few of their tracks including the ones with occasional forays into English (lines such as "I hate you" as a refrain, and "Go to hell" chanted softly at the end of a song). Worth watching. Regards, Alex. 1 1 Link to post Share on other sites More sharing options...
Signaller69 Posted July 3, 2020 Share Posted July 3, 2020 19 hours ago, John Tomlinson said: Now there's a blast from the past! At risk of losing all cred. I rather like his stuff, some of it anyway, it brings back memories of a large "O" gauge public layout in York around 40 years ago where they played one of the LP's - Oxygene I think - as backdrop. Still listen to the LP's sometimes when I'm modelling. At a similar time an old school friend was in HMV in Manchester and overheard a conversation "Have you heard the latest from Jean and Michael?" one person asked the other. Happy days. John. No cred lost imo, JMJ is always a popular listen here too. I didn't see all the VR online gig he did the other day, but I think his "cutting edge" label is still valid today. Been to a couple of his live shows, the light shows are spectacular as you would expect. My Dad did a slide show of one of our trips to Kyle & Mallaig for a local camera club using "The Essential JMJ" as a soundtrack; now I can only connect it with a mental trip through the Highlands! Happy days. 4 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted July 8, 2020 Author RMweb Premium Share Posted July 8, 2020 (edited) Hi All I have been model making It is all the fault of Mallard60022 and 31A, they had a competition building a wagon each. I had to judge, both came second, you cannot have joint first because there is only one first. Cambrian kit of a SR or LNER (built at Ashford) 5 plank open, as modified by BR with vacuum brakes. While I was throwing it together, didn't go together as well as a Parkside kit, I had two BR Standard 5s trundling around the layout, one on a Manchester express and the other on a York bound semi-fast. Edited July 8, 2020 by Clive Mortimore 15 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted July 8, 2020 Author RMweb Premium Share Posted July 8, 2020 Oh a song 2 Link to post Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted July 8, 2020 RMweb Gold Share Posted July 8, 2020 More lockdown modelling continuing with the completion of some half finished items. The LMR excursion set has just gained another coach, this time a Period 1 Open Third or second as it would have been in this livery. It's a panelled two-window type to Diagram 1692 of which 555 were built between 1925 and 1929. They lasted in revenue service until the end of 1963. A large number were converted to Ward Cars for ambulance trains in WW2 then converted again to 57' Full Brakes on their return to the LMS. The model is Comet sides on a Replica/Bachmann donor. The Stones vents were 3D printed by Guy Rixon based on a sketch I made at the NRM. Next for the set will be a Period 1 all-steel BTO in blood & custard livery. The body is completed awaiting a delivery of some bits to finish the mods to the underframe and adding roof detail as I have just noticed that this lot had a steel roof with quite prominent rivetted seams. 13 Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted July 9, 2020 RMweb Premium Share Posted July 9, 2020 8 hours ago, Clive Mortimore said: ...Cambrian kit of a SR or LNER (built at Ashford) 5 plank open, as modified by BR with vacuum brakes. Good lad! You'll be building Queen Mary's from Jidenco kits in no time at all my babber 2 6 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted July 9, 2020 RMweb Gold Share Posted July 9, 2020 11 hours ago, Clive Mortimore said: Hi All I have been model making It is all the fault of Mallard60022 and 31A, they had a competition building a wagon each. I had to judge, both came second, you cannot have joint first because there is only one first. Cambrian kit of a SR or LNER (built at Ashford) 5 plank open, as modified by BR with vacuum brakes. While I was throwing it together, didn't go together as well as a Parkside kit, I had two BR Standard 5s trundling around the layout, one on a Manchester express and the other on a York bound semi-fast. Try a Cambrian loriot, that will test your throwing abilities, probably across the room! Needing 10 thou spacer washers behind the brass top hats is the least of its issues. If ever a kit needed a refresh, this is the one, and as for the instructions, words fail me. Mike. 1 2 1 1 Link to post Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted July 9, 2020 RMweb Gold Share Posted July 9, 2020 I've done a few Cambrians, tend to be needing a bit of adjustment to get the best job, although the SR 8-plank I used for a BR Vac conversion went OK. So did the Boplate, although I gave up on the fiddly buffers and used Dave Franks ones for that.. The Dance Hall Brake was a bit more awkward and I am currently wrestling with a rake of Catfish hoppers. I've got three assorted bogie bolsters in the stash which are due to replace some of my old Airfix/Mainline/Hornby ones. 2 2 1 Link to post Share on other sites More sharing options...
RMweb Premium 31A Posted July 9, 2020 RMweb Premium Share Posted July 9, 2020 18 hours ago, Clive Mortimore said: Hi All I have been model making It is all the fault of Mallard60022 and 31A, they had a competition building a wagon each. I had to judge, both came second, you cannot have joint first because there is only one first. Cambrian kit of a SR or LNER (built at Ashford) 5 plank open, as modified by BR with vacuum brakes. Here's my contribution to the wagon building competition. It's a Chivers LNER Loco Coal wagon which I got recently from W M Collectables. It took me 115 minutes yesterday to get it to this stage which included substituting metal tie bars for the moulded ones, and fitting a heftier brake cross shaft. In the process of which I managed to break one of the brake levers! But apart from ham fistedness on my part, it was a very nice kit to build. Today I've fitted t/l coupling mountings and a ballast weight under the floor, but weather too bad for outdoor aerosol painting. 11 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted July 9, 2020 RMweb Gold Share Posted July 9, 2020 1 hour ago, 31A said: Here's my contribution to the wagon building competition. It's a Chivers LNER Loco Coal wagon which I got recently from W M Collectables. It took me 115 minutes yesterday to get it to this stage which included substituting metal tie bars for the moulded ones, and fitting a heftier brake cross shaft. In the process of which I managed to break one of the brake levers! But apart from ham fistedness on my part, it was a very nice kit to build. Today I've fitted t/l coupling mountings and a ballast weight under the floor, but weather too bad for outdoor aerosol painting. Messrs Peco Parkside, Cambrian and others please take note, that's a decent wagon kit! Mike. 3 3 Link to post Share on other sites More sharing options...
Andrew P Posted July 9, 2020 Share Posted July 9, 2020 Good to see your doing some proper Modelling again Mr M. 3 1 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted July 9, 2020 RMweb Gold Share Posted July 9, 2020 1 hour ago, Andrew P said: Good to see your doing some proper Modelling again Mr M. Yes, and he's made such a good job of it you can't tell which Hornbachtrixang coaches he cut and shut it from, and worryingly it's all one colour. Mike. 1 2 3 Link to post Share on other sites More sharing options...
Gibbo675 Posted July 9, 2020 Share Posted July 9, 2020 Wagons ? The bestist ever wagons are Presflos tanks. I can't explain why, they just are, so there. How much powdered commodity do you want ? Gibbo. 5 1 3 Link to post Share on other sites More sharing options...
cheesysmith Posted July 9, 2020 Share Posted July 9, 2020 Me, I'm just trying to resist the temptation of the reissue of the chivers MDV. Already got more than a few, some converted to non top flap versions, and some with ex HTO underframes. I have to keep telling myself I don`t need more. 1 Link to post Share on other sites More sharing options...
jimwal Posted July 9, 2020 Share Posted July 9, 2020 Now we've got wagons rolling on here Clive will expect to see something from me. A recent build, LMS tube wagon straight out of the Chivers bag. Good to see these kits coming back. 10 Link to post Share on other sites More sharing options...
jimwal Posted July 9, 2020 Share Posted July 9, 2020 A much older model, a 3H LMS design coke hopper. This was built in the seventies as one of six. They suffered from exhibition travels, the plastic has become very brittle. Clive will remember the long freight trains these featured in we operated on the club layouts at shows. 9 Link to post Share on other sites More sharing options...
richard i Posted July 10, 2020 Share Posted July 10, 2020 I see your tube wagon, and I raise you a gcr 5 plank. yes I know I need to fit a number plate, I will get round to it. richard 9 Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted July 10, 2020 RMweb Premium Share Posted July 10, 2020 er.... this is as far as I've got 5 4 Link to post Share on other sites More sharing options...
Gibbo675 Posted July 10, 2020 Share Posted July 10, 2020 Hi Folks, More wagons, here is a suitably modified FGA, FFA's are also available; Better yet and just for Clive a cut and shut set of prototype container flats: Who needs fancy kits when you can hack old Triang stuff about. Gibbo. 7 1 5 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted July 10, 2020 RMweb Gold Share Posted July 10, 2020 1 hour ago, Tim Dubya said: er.... this is as far as I've got No wonder you haven't made much progress, it must be one hell of a job filing the flanges off! Mike. 1 5 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted July 10, 2020 RMweb Gold Share Posted July 10, 2020 Aforementioned Loriot with an eBay purchase as a load. Don't look too closely, the wagon is a "make the most of a bad job" scenario, and both it and the load will be subjected to final fettling when I get home (hopefully a week today) as there is no point buying the bits and bobs twice unnecessarily. This will include finishing the bufferheads off with files and filler in the mini drill, replacing a few more lumpen bits of Cambrian plastic with microstrip, spraying and fitting CCT transfers. I'm hoping to get to John Dutfields before I go back, if he's got a kit in stock I will probably have another go at the wagon learning from this experience. A definite case of managing to build a model despite the kit and the instructions! Mike. 6 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now