Johnson Street IEMD Posted January 31, 2020 Share Posted January 31, 2020 (edited) I'm glad all you naysayers said nay lol... as this means I've got to snap up my favourite class member. I have just updated my space on here.... ''Newsflash ''90024 joins the pool of 90s at Johnson Street IEMD " and i have a sound chip waiting for it once it lands too.. Edited January 31, 2020 by DBC90024 3 Link to post Share on other sites More sharing options...
mikeford2002uk Posted February 9, 2020 Share Posted February 9, 2020 Afternoon everyone My version of a Bachmann RES liveried 90, 90019 Penny Black. Paint by Precision, nameplates by Shawplan,RES emblems by Fox and excellent numbers from Railtec. 47357 and 90027 also have the same source of plates and transfers . Unfortunately having painted the body, on picking up the chassis the dreaded loose bogie issue appeared! Knowing a replacement might be difficult with the retailer I thought I'd see if I could repair the bogie fixing The existing arrangement is a small screw through the cast chassis block into the plastic of the bogie gearbox, where the failure occurs. I thought the best method of repair was to fit a inverted small countersunk screw (with additional epoxy glue fixative). There isn't much clearance above the gear-train , but enough Above the chassis there is a small washer and nut holding firm but before fitting make sure the "inverted" U section above the gear tower is removed to allow the driveshaft to reconnect (making sure the brass top hat bearings are still present). This makes life much easier Since the pick-up wire broke these were replaced before refitting the bogie Mike 3 Link to post Share on other sites More sharing options...
cravensdmufan Posted February 9, 2020 Share Posted February 9, 2020 (edited) Has anyone sent one back to their retailer for repair of the dreaded bogie droop? Just wondering what the turn round time is? I sent one back to Cheltenham Model Centre 6 weeks ago for repair as they didn't have another RfD one. Heard nothing since. I'm guessing Bachmann repairs department are probably flat out fixing these locos. Is it too soon to start chasing them up? Well I'll give them a ring tomorrow anyway, but I'd be interested to hear other members experiences. Edited February 9, 2020 by cravensdmufan Spelling 1 Link to post Share on other sites More sharing options...
TomScrut Posted February 9, 2020 Share Posted February 9, 2020 (edited) What exactly is the problem, as in how should I be able to tell if mine is affected? I don't think my 90 has been off the rails since I bought it! Edited February 9, 2020 by TomScrut Link to post Share on other sites More sharing options...
Guest Half-full Posted February 9, 2020 Share Posted February 9, 2020 4 minutes ago, TomScrut said: What exactly is the problem, as in how should I be able to tell if mine is affected? There are full details in the thread but to sum it up it appears that the bogies are screwed on too tight at the factory which breaks the bogie/chassis fixing mount causing the bogies to droop dramatically at the nose ends when picked up. Link to post Share on other sites More sharing options...
mikeford2002uk Posted February 9, 2020 Share Posted February 9, 2020 (edited) Tom If you pick the model up and a bogie is loose or falls away from the body, yours is affected - but not all are Mike Edited February 9, 2020 by mikeford2002uk 1 1 Link to post Share on other sites More sharing options...
cravensdmufan Posted February 9, 2020 Share Posted February 9, 2020 (edited) 33 minutes ago, TomScrut said: What exactly is the problem, as in how should I be able to tell if mine is affected? I don't think my 90 has been off the rails since I bought it! See my photos as an example of the problem: I'd keep yours firmly on the rails if I were you! It seems like the slightest knock can fracture the bogie mounts on some models. Most seemed to happen in normal courier transit. Now wish I'd bought mine in person from a shop or at an exhibition to be able to check it first. Edited February 9, 2020 by cravensdmufan 1 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted February 9, 2020 RMweb Gold Share Posted February 9, 2020 Meanwhile I suffered a more “routine” AC electric issue, in moving it between boxes last week a wire caught the pantograph and took the arm off. I have asked Bachmann spares about spares.. if the bogie issue is all what its played up to be, I assume a pantograph maybe around to retrieve. Failing that i’ll glue it down and sell the servo, ive no knitting on my layout. 1 Link to post Share on other sites More sharing options...
cravensdmufan Posted February 10, 2020 Share Posted February 10, 2020 (edited) 12 hours ago, mikeford2002uk said: Afternoon everyone My version of a Bachmann RES liveried 90, 90019 Penny Black. Paint by Precision, nameplates by Shawplan,RES emblems by Fox and excellent numbers from Railtec. 47357 and 90027 also have the same source of plates and transfers . Unfortunately having painted the body, on picking up the chassis the dreaded loose bogie issue appeared! Knowing a replacement might be difficult with the retailer I thought I'd see if I could repair the bogie fixing The existing arrangement is a small screw through the cast chassis block into the plastic of the bogie gearbox, where the failure occurs. I thought the best method of repair was to fit a inverted small countersunk screw (with additional epoxy glue fixative). There isn't much clearance above the gear-train , but enough Above the chassis there is a small washer and nut holding firm but before fitting make sure the "inverted" U section above the gear tower is removed to allow the driveshaft to reconnect (making sure the brass top hat bearings are still present). This makes life much easier Since the pick-up wire broke these were replaced before refitting the bogie Mike Superb repaint on 19 Mike. It really looks the business. Regarding the bogie issue, I assume the loco was OK when you purchased it and that it fractured subsequently? If so, it goes to highlight how vulnerable they are to the slightest knock (which may presumably become even more of an issue as the loco gets older and the plastics harden and get more brittle). I wonder if it would be prudent for owners to slightly loosen the bogie screws to lessen the chance of future fractures, thereby avoiding the hassle of having to make their own repairs after the manufacturer's warranty has expired. Just a thought. Edited February 10, 2020 by cravensdmufan Rewording 1 Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted February 10, 2020 RMweb Premium Share Posted February 10, 2020 15 hours ago, mikeford2002uk said: My version of a Bachmann RES liveried 90, 90019 Penny Black. Paint by Precision, nameplates by Shawplan,RES emblems by Fox and excellent numbers from Railtec. 47357 and 90027 also have the same source of plates and transfers. Nice job, but I think the corner pillars on 90027 should be black, not yellow. 1 Link to post Share on other sites More sharing options...
letterspider Posted February 10, 2020 Share Posted February 10, 2020 6 hours ago, cravensdmufan said: Superb repaint on 19 Mike. It really looks the business. Regarding the bogie issue, I assume the loco was OK when you purchased it and that it fractured subsequently? If so, it goes to highlight how vulnerable they are to the slightest knock (which may presumably become even more of an issue as the loco gets older and the plastics harden and get more brittle). I wonder if it would be prudent for owners to slightly loosen the bogie screws to lessen the chance of future fractures, thereby avoiding the hassle of having to make their own repairs after the manufacturer's warranty has expired. Just a thought. I would like to think Bachmann have got an easy fix by producing more of these bogies in harder plastic by the hundred load and selling he spares for a reasonable price Link to post Share on other sites More sharing options...
Pete the Elaner Posted February 10, 2020 Share Posted February 10, 2020 6 minutes ago, letterspider said: I would like to think Bachmann have got an easy fix by producing more of these bogies in harder plastic by the hundred load and selling he spares for a reasonable price Wouldn't harder plastic make it worse, because it would be more brittle too? It was commented earlier that Bachmann have already identified the issue as the screws being overtightened. It seems their answer would therefore be to ensure they are less tight & maybe also to add a little thread lock during assembly. 1 Link to post Share on other sites More sharing options...
cravensdmufan Posted February 10, 2020 Share Posted February 10, 2020 1 minute ago, Pete the Elaner said: Wouldn't harder plastic make it worse, because it would be more brittle too? It was commented earlier that Bachmann have already identified the issue as the screws being overtightened. It seems their answer would therefore be to ensure they are less tight & maybe also to add a little thread lock during assembly. And maybe they should also improve the internal packing - even a piece of foam under each bogie would stop them jiggling about in transit. 1 Link to post Share on other sites More sharing options...
letterspider Posted February 10, 2020 Share Posted February 10, 2020 It is easy to overtighten screws and this could also occur by the customer 1 hour ago, Pete the Elaner said: Wouldn't harder plastic make it worse, because it would be more brittle too? It was commented earlier that Bachmann have already identified the issue as the screws being overtightened. It seems their answer would therefore be to ensure they are less tight & maybe also to add a little thread lock during assembly. I agree but certainly a different formulation is needed or the lengthier and more expensive alternative - newly designed moulds with a thicker seat for the screw. In either case I hope the problem is solved as I am anticipating the release of new liveries this year and at this sort of price (or maybe even higher) it is really discouraging. I am also worried about my current model because it looks like every Class 90 bogie is going to fail at some point - it is simply a matter of time. 1 Link to post Share on other sites More sharing options...
Pete the Elaner Posted February 10, 2020 Share Posted February 10, 2020 9 minutes ago, letterspider said: it looks like every Class 90 bogie is going to fail at some point - it is simply a matter of time. That's a big assumption based purely on speculation. Who knows why the issue occurred? It could have been attributed to 1 person out of 100 people performing tightening these by hand...or even someone having a bad morning, but after lunch they were fine. Or maybe it was an electric driver set wrong which was later corrected. Maybe someone within the factory knows? Maybe nobody does. Link to post Share on other sites More sharing options...
cravensdmufan Posted February 10, 2020 Share Posted February 10, 2020 17 minutes ago, letterspider said: I am also worried about my current model because it looks like every Class 90 bogie is going to fail at some point - it is simply a matter of time. Yes, I am worried about that as well. Particularly as and when they do fail the loco will probably be out of warranty. Those sort of things usually happen to me within a few weeks of the expiry of a guarantee! Link to post Share on other sites More sharing options...
letterspider Posted February 10, 2020 Share Posted February 10, 2020 Yes, it is my opinion but I am sure from the numbers of damaged Class 90 we are hearing about that more owners who know about it will be worried than not. 1 Link to post Share on other sites More sharing options...
letterspider Posted February 10, 2020 Share Posted February 10, 2020 (edited) Fingers crossed on a quick and easy fix then, so we can enjoy the next round of liveries and the ones we already have Edited February 10, 2020 by letterspider 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted February 10, 2020 RMweb Gold Share Posted February 10, 2020 3 hours ago, cravensdmufan said: Yes, I am worried about that as well. Particularly as and when they do fail the loco will probably be out of warranty. Those sort of things usually happen to me within a few weeks of the expiry of a guarantee! Dont worry, Mazak did far worse 10 years ago, we still survived. Spares show up on ebay. As I said about my 90.. bogies are fine.. pantograph isnt, if I dont get a pantograph, somewhere in decades to come it will end up parted out. 1 Link to post Share on other sites More sharing options...
cravensdmufan Posted February 14, 2020 Share Posted February 14, 2020 On 09/02/2020 at 15:57, cravensdmufan said: Has anyone sent one back to their retailer for repair of the dreaded bogie droop? Just wondering what the turn round time is? I sent one back to Cheltenham Model Centre 6 weeks ago for repair as they didn't have another RfD one. Heard nothing since. I'm guessing Bachmann repairs department are probably flat out fixing these locos. Is it too soon to start chasing them up? Well I'll give them a ring tomorrow anyway, but I'd be interested to hear other members experiences. In case anyone else is awaiting for repairs from Bachmann. Just had an update from Cheltenham Model Centre regarding my Class 90 that was returned 7 weeks ago. Apparently Bachmann have been closed for stock taking for 3 weeks and they are looking at it now. So hopefully I should get it back soon. 1 Link to post Share on other sites More sharing options...
RMweb Gold TravisM Posted February 14, 2020 RMweb Gold Share Posted February 14, 2020 If and when Bachmann do a second batch of Class 90’s, I’d like to see EWS and DBC liveried versions as I used to see them until recently at Peterborough. Just a personal preference 1 2 Link to post Share on other sites More sharing options...
ThaneofFife Posted February 15, 2020 Share Posted February 15, 2020 virgin livery sounds like it could fly off the shelves..... ha.... i wonder how the 90 would have looked in early Executive livery decked out with yellow cab roofing and the half grey wrapped front ends,,,,,,,,, Link to post Share on other sites More sharing options...
RMweb Gold TravisM Posted February 16, 2020 RMweb Gold Share Posted February 16, 2020 (edited) I was trying to work out the combination of liveries the Class 90’s have worn over the years. InterCity Mainline RfD with sectorisation logo RfD with Railfreight Distribution The DB, SNCF, SNCB and RfD specials Freightliner red flash Freightliner green livery Freightliner Powerhaul Freightliner G&W RES GNER Virgin Trains EWS EWS Malcolm livery EWS Scotrail Sleeper DB Schenker DBC I think I’ve covered most of the liveries but I expect I’ve missed the odd one out. It certainly gives Bachmann a huge variety of choices in livery for a class that was just 50 strong. Edited February 16, 2020 by jools1959 Link to post Share on other sites More sharing options...
298 Posted February 16, 2020 Share Posted February 16, 2020 3 hours ago, jools1959 said: I was trying to work out the combination of liveries the Class 90’s have worn over the years. InterCity Mainline RfD with sectorisation logo RfD with Railfreight Distribution The DB, SNCF, SNCB and RfD specials Freightliner red flash Freightliner green livery Freightliner Powerhaul Freightliner G&W RES GNER Virgin Trains EWS EWS Malcolm livery EWS Scotrail Sleeper DB Schenker DBC I think I’ve covered most of the liveries but I expect I’ve missed the odd one out. It certainly gives Bachmann a huge variety of choices in livery for a class that was just 50 strong. There is a comprehensive discussion starting back on page 54. I think you've got the main ones but there are also the slight variations. I once had the crazy idea about 20 years ago of modelling all 50 locos as I was about a third of the way there, but didn't consider a better RTR loco being released or one loco carrying more than one unique livery, such as 90024 in GNER and Malcolm. 1 Link to post Share on other sites More sharing options...
PM47079 Posted February 16, 2020 Share Posted February 16, 2020 I did do all 50 but obviously they are all Hornby ones. I will have to post a picture of them. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now